The iL4 is designed for potentially explosive atmospheres within ambient temperatures of -20°C to +40°C and air pressures of 80–110 kPa. It is certified to relevant standards (e.g., EN 60079 series) and carries ATEX/IECEx markings for safe use when closed and operated correctly.
Is this answer helpful?
A
Use only the specified alkaline AAA battery types shown by the manufacturer, and ensure all cells are of the same type and charge. With fresh batteries the iL4 runs up to approximately 4 hours; runtime will vary with battery brand and condition.
Is this answer helpful?
A
No. Batteries must be replaced only outside explosive atmospheres. The lamp must be fully closed before being taken into a hazardous area to preserve intrinsic safety.
Is this answer helpful?
A
If the pressure-regulating membrane is damaged, or if the housing/seals show signs of damage, switch off the lamp, remove it from the hazardous area, and discontinue use. Defective units must be returned to the manufacturer or disposed of per local regulations; repairs and modifications are prohibited.
Is this answer helpful?
A
Clean the flashlight by gently wiping it with a dry, lint-free cloth. Inspect regularly for foreign matter or damage, remove batteries for long-term storage, and avoid exposing the unit to extreme thermal, mechanical, or chemical stress.
Is this answer helpful?
A
No. Flashlights intended for hazardous locations must not be repaired or modified by users. Any defective units should be returned to the manufacturer or disposed of according to local recycling rules.
Is this answer helpful?
A
Register your product using the included registration card to validate authenticity and obtain extended warranty coverage. Registration also allows the manufacturer to contact you regarding product improvements.
Is this answer helpful?
M: OA-GPT-5-NAN
Advantagesand
Disadvantages
Advantages
Intrinsic-safety certified (ATEX/IECEx) for use in explosive atmospheres.
Compact, portable design with up to 4 hours runtime on specified alkaline AAA batteries.
Simple end-cap switch and clear alignment markings for reliable, easy operation.
Durable housing with sealed construction and pressure-regulating membrane for safety.
Manufacturer-backed conformity declarations and option to register for extended warranty.
VS
Disadvantages
Battery replacement must be done outside hazardous areas, limiting convenience on-site.
Not suitable for permanent installation — intended only for portable use.
Membrane damage disables safe use; field repairs and modifications are prohibited.
Runtime (≈4 hours) may be short for prolonged operations without spare batteries.
Requires specific alkaline battery types; mixed or damaged cells are not permitted.
M: OA-GPT-5-NAN
Product
Specification
Type
Flashlight
Colors
gray, yellow
Light source
1x LED
Max. light output
80lm
Beam range
164.04ft
Max. run time
4h
Power supply
2x AAA
Length
5.51in
Head diameter
0.79in
Weight
0.14lb
Special features
waterproof (IPX8), dustproof
M: OA-GPT-54-NAN
Product
Description
Ledlenser iL4 Taschenlampe — Safe, Portable Illumination for Hazardous Areas
The Ledlenser iL4 Taschenlampe is a compact, handheld flashlight engineered for safe use in potentially explosive atmospheres. Designed and manufactured by Ledlenser GmbH & Co. KG (item no. 500684), the iL4 combines rugged construction, regulatory compliance, and user-focused features to deliver reliable lighting in industrial and safety-critical environments.
Key features and usage
Built for portability, the iL4 operates within ambient temperatures of -20°C to +40°C and air pressures from 80 kPa to 110 kPa. It is certified to relevant explosion-protection standards (e.g., EN 60079 series) and carries ATEX/IECEx conformity markings appropriate for gas and dust zones where intrinsic safety is required. The lamp is powered by specified alkaline AAA batteries and provides up to around 4 hours of runtime on fresh cells. The end-cap switch offers simple on/off control while an alignment arrow on the body ensures the head is correctly positioned for operation.
The design emphasizes safety: a pressure-regulating membrane maintains enclosure integrity and must not be damaged, covered, or removed; the unit must be fully closed before entering explosive atmospheres; and battery replacement is explicitly restricted to non-hazardous areas. Regular visual inspections of the housing and seals are recommended, and any sign of damage requires removing the light from hazardous zones and taking it out of service.
Construction and care
The iL4 features a robust housing and seals suitable for controlled industrial use. Users should avoid exposing the product to extreme thermal, mechanical, or chemical stresses and to direct sunlight for prolonged periods. Cleaning is simple—wipe with a dry, lint-free cloth—and foreign matter inside the housing should be removed immediately. Damaged or defective units must be discarded or returned to the manufacturer; repairs and modifications are prohibited for units intended for explosive atmospheres.
Compliance and environmental guidance
Ledlenser issues the declaration of conformity under its responsibility, listing compliance with EU directives and harmonised standards. Batteries and the flashlight must be recycled according to local regulations rather than disposed of with municipal waste. Product registration via the included card is recommended to validate authenticity and secure extended warranty benefits.
Notes
Use only the alkaline battery types specified and always replace batteries outside hazardous areas.
Do not look directly into the light source.
If the membrane is damaged, stop using the lamp and remove it from the hazardous area.