Manual.ly Logo

Ksix ColorLED Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 12

Loading...
995bee6f4b18487ca5aa1ca29a3fc1fae769 page 1
COLORLED
User manual
BXLEDST10M
Technical information
LED: 5050RGB
LED Quantity: 30 pcs per meter
Output power: 24W
Input voltage: AC 100V-240V
Output voltage: DC12V
Distance of remote operation: within 5m
Working temperature:-20-+45°C
Illumination angle: 120°
Dimensions: 5000*10* (mm) *2
Lumens: 12-15 lm per LED
FAQS
The LED strip does not light up after connecting the controller and power on.
1. Check the power input: Please use our supplied adapter or any other power source which
is of the same type as our adapter. LED light must be used under 12V voltage.
2. Check if the controller and the strip are properly connected. Confirm all connections are
OK.
3. Check if the remote control is switched on.
The LED strip is on, but the remote controller is not working or cannot control the LED
light.
1. Check if the insulation plate is in the remote control.
2. Check if the battery of the remote control is well placed.
3. Confirm that you are within 5m and align with infrared sensor.
4. Try to change the battery.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
z• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
• When you use device keep it away from heat sources (fire) and from humidity sources
(water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot
weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch o the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EC.
The features and functions described in this manual are based on tests made by Atlantis
Internacional S.L. It is the user’s responsibility to examine and verify the product after its
purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any
personal loss or injury, economical loss, material loss or any damage due to misuse, abuse
or improper installation of the product.
For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and
will never be liable for any function, communication and connection failure between the
product and Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.
• This product is designated for separate collection at an appropriate collection point. Do
not dispose of as household waste.
• The final price of this product includes the cost necessary for the correct environmental
management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed
in an appropriate collection center. If the batteries cannot be removed, do not attempt to
do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative
consequences for human health and the environment that might result from incorrect
disposal.
• For more information, contact the retailer or the local authorities in charge of waste
management.
Illustration
Attention: make sure the arrows connect
properly or the light won’t work.
DC12V Power input
Infrared sensor
①Increase / Decrease brightness
②16 static colors
③On / O
④Flash eect
⑤Stroboscopic eect
⑥Fade eect
⑦Smooth eect
SMOOTH
FADE
STROBE
FLASH
WR G B
ONOFF
1
2
3
4
5
6
7
In the box
2 led strip
1 remote control
1 AC adapter
1 User manual
1 Infrared receiver
2 grippers
REMOTE CONTROL INSTRUCTIONS

Chat with your Ksix ColorLED manual using AI

Get instant AI answers from your Ksix ColorLED manual

Ask anything about the Ksix ColorLED. Answers come from this manual, with the pages they are based on.

ColorLED Maintenance Schedule

Regularly
Clean the product with a dry cloth

Disconnect or switch off the product before cleaning. Use only a dry cloth to remove dust and dirt.

As needed
Keep connectors and ports free from dust

Ensure connectors and ports are clean of dust, lint, and debris to prevent improper connections.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ColorLED?

Yes No

Frequently Asked Questions

A

Check the power input first. Ensure you use the supplied adapter or a 12V DC compatible source. Verify the controller and strip are properly connected. Confirm all connections are OK. Ensure the remote control is switched on and aligned with the infrared sensor.

Is this answer helpful?

A

Check if the insulation plate is in the remote control. Ensure the battery is well placed. Confirm you are within 5m and align with the infrared sensor. Try changing the battery. The remote relies on direct line-of-sight to the receiver.

Is this answer helpful?

A

No, do not wet the product. It is designed for indoor use. Keep it always in a dry place away from humidity. If water or other liquids enter the product interior, unplug it immediately. Do not expose to rain or high moisture.

Is this answer helpful?

A

The input voltage is AC 100V-240V. The output voltage must be DC 12V. Output power is 24W. LED quantity is 30 pcs per meter. You must use the adapter type specified for proper function.

Is this answer helpful?

A

Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it. Avoid bending it too strong. Keep connectors free from dust and liquids to prevent damage.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High-quality 5050 RGB LEDs with 30 per meter
  • Dual 5m strips for flexible installation
  • Global voltage compatibility from 100V-240V
  • Includes infrared remote control up to 5m range
  • 16 static colors and multiple dynamic effects
VS

Disadvantages

  • Infrared remote limited to 5m line-of-sight range
  • Product is not waterproof for outdoor use
  • Requires specific 12V DC connection setup
  • Adhesive backing strength not specified
  • Manual is only in standard text format
M: qwen/qwen3.5-flash-20260224

Product Specification

Light Source

24W, RGBW, dimmable

Features

dimmable (remote control only), White color temperature control, RGB color control, Remote control

Ingress Protection

IP20

Dimensions

393.70 inches (L)

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Ksix RGBW LED Strip 10m (2x 5m) Manual

Welcome to the ultimate lighting solution for you and your home spaces with the Ksix RGBW LED Strip 10m (2x 5m) Manual. This comprehensive guide ensures you maximize the potential of your new product effectively. High-quality 5050 RGB LEDs deliver vibrant colors with 30 lights per meter across the dual strips. Operating on a robust 24W output using standard 12V DC voltage, it is compatible with AC 100V-240V power sources found globally. The infrared remote allows seamless control within 5 meters for smooth operation from your sofa.

You can choose from 16 static colors or switch to dynamic effects like flash, strobe, or fade modes. Adjustable brightness is simple and lets you set the perfect vibe for any evening. Safety remains a crucial priority, so always keep the unit away from fire and excessive moisture sources. The device works optimally between minus 20 to 45 degrees Celsius for standard usage. Regular cleaning with a soft dry cloth is highly recommended but only when the power is disconnected entirely. Avoid bending the LED cables too much to prevent internal wiring damage and failure.

Do not use the device with wet hands to ensure personal safety. If you accidentally get liquids inside, unplug the power source immediately. Store the unit in a dry place free from dust when not in use. The product box includes two LED strips, one remote, one AC adapter, one receiver, and two grippers for easy mounting. Troubleshooting involves checking the power input first. Confirm all connections are secure and tight. Ensure the remote battery is placed correctly inside the compartment. Align the remote directly with the infrared sensor for best signal.

If the light is on but remote fails, simply replace the battery with a new one. Legal compliance is ensured with Directive 2014/53/EC standards. Manufacturer Atlantis Internacional S.L. declares this product safe and functional. User responsibility to verify condition after purchase is noted. Recycling rules apply strictly for waste management. Dispose of batteries properly at official collection centers. Do not throw the product into fire. Keep away from children and flammable materials.

Do not modify the product to avoid voiding warranty terms. If water enters, disconnect power source immediately. This flexible strip adds ambiance to rooms for entertainment or decor purposes. Install on flat surfaces and use provided grippers. The light angle is 120 degrees for wide room coverage. Ensure arrows connect properly for function. It is not waterproof so keep indoors in dry areas. Maintenance avoids long-term damage. Follow instructions for warranty validity and peace of mind. Enjoy your custom lighting setup now with confidence.

Read the instructions before first use carefully. Verify compatibility with your existing power supplies thoroughly. The user must examine the unit after purchasing. If defects appear, stop use immediately. The system includes detailed safety information for all regions. Environmental rules protect natural resources globally. Contact retailer for waste info details. The strip emits 12-15 lumens per LED for brightness. Use only the supplied adapter type for charging. Avoid dropping the device to prevent cracks. Do not leave unattended near children at home. Unplug if not using for a long time period. No liability for misuse applies to buyer. Ensure remote switch is always on before control.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly