Manual.ly Logo

Krups XP 444C Virtuoso+ Manual

0.0 · 0 Ratings

PDF manual · 121 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 121

Loading...
acb322b9c3747f3fa3c2cdef31a3c482f37f page 5
54
ENGLISH
IMPORTANT! Warning! To prevent the milk from splashing, do not lift the nozzle out
of the milk when using “steam” mode.
IMPORTANT! Warning! The steam nozzle is still hot! Take care not to burn yourself!
IMPORTANT! After switching off the steam function, clean the nozzle immediately
and carefully, as set out in the section: CLEANING AND MAINTENANCE .
GOOD TO KNOW – PRACTICE AFTER USING STEAM
• If you want to make an espresso after using the steam function, you need to cool down your
coffee machine to avoid burnt coffee.
• Press button
to return to the coffee brewing mode, if buttons orange light ash, it
means the temperature in thermoblock is too high, please do not make coffee right now. You need
to lower temperature.
• Immerse the steam nozzle in a container lled with 60 ml of water.
• Turn the knob from preheat (M1) back to steam position (M2) (28) to make hot water.
The machine stops producing hot water automatically once the system has cooled down. Turn the
knob (M) back to (M1). The buttons
will remain lit white. The machine is in coffee brewing
mode
Hot water preparation
1. The machine is in coffee brewing mode.
2. Place a container under the steam nozzle.
3. Turn the knob to the position (M2) (28).
buttons white lights turn off, button white light
ash. Machine starts making hot water and it will stop when turn the knob back to the position
pre-heating (M1) (30).
4.
buttons white lights stay on, button white light off.
CLEANING AND MAINTENANCE
Unplug (K) before each clean let the appliance cool down rst.
Machine: Clean the outside of the appliance with a damp sponge when you think it necessary. Do
not use solvents or abrasive detergents to clean the coffee machine.
Water tank: Rinse the inside of the tank regularly. When a ne white layer appears in the tank,
descale the appliance (refer to the section on descaling).
Drip tray: Clean the drip tray (J) and its grid (I) using water and a little mild detergent (33-34). Rinse
and dry. Only the drip tray grill is dishwasher safe.
Filter holder, lters: Using a damp cloth, clean the lter holder mount regularly in order to remove
possible coffee residues stuck to the surface. In order to prolong the useful life of the watertight seal
on the brewing head, do not put the lter holder back in place if the coffee machine is not to be used
for extended periods. To remove any deposits that could block the ow of your 1 or 2 cup lter, you
may use the needle. Filters are dishwasher safe.
Steam nozzle: To prevent milk from drying inside the nozzle, please clean it after each use. To do
this, follow the steps for foaming the milk, replacing 100 ml of milk with 60 ml of water. After turning
off the steam, quickly and carefully clean the steam nozzle using a damp sponge (in order to remove
any residue). Pull the tube of the steam nozzle downwards. Carefully clean the steam nozzle with
lukewarm water (31-32). Fit the tube back onto the steam nozzle. Only the steam nozzle tube is
dishwasher safe.
4. Set the steam nozzle to the foaming function (H1) by turning the ring (27)
5. Place the steam nozzle (H) into a container lled with milk.
6. Turn the knob (M) from preheat (M1) to steam position (M2) (28),
button white light ashes,
the machine starts to make steam.
Note: For best results, foam the milk near the bottom of the container for approximately 10 seconds,
taking care not to touch the bottom. Then slowly tilt the container and move the nozzle upwards until
it is almost at the surface of the milk. Make sure that the nozzle does not leave the milk. To get a great
foam, move the container in circular motions (29).
7. Once you have achieved the best foam turn the knob back to preheat position (30).
Note: To prevent overheating the milk, do not use the steamer for more than 45 seconds (for 100 ml
of milk).
8. Spread the milk foam over the cup(s) of espresso.
Note:
• If you wish to make more than one cappuccino, rst make all the espressos, then make the milk
foam.
• After turning off the steam, quickly and carefully clean the steam nozzle using a damp sponge (to
ensure that residues do not remain stuck).
Hot milk preparation
Follow the steps described in the section “Making Cappuccino”, taking care to modify the steam
function in step 4, which will produce hot milk instead of foamed milk:
4. Set the steam nozzle to the hot milk function (H2) by turning the ring (27)
DESCALING
IMPORTANT! Warning! Do not clean any parts of this appliance in a dishwasher.
(Dishwashing safe only for drip tray grill, steam nozzle tube, lter cups.)
The machine can be descaled at any time, even if the descaling light is not on. However, the coffee
machine auto counts the use cycles and gives the alert when the machine must be descaled: when
the button
white light and orange light ash in turn and the button white light is lit, the machine
needs to be descaled.
1. Prepare the descaler in accordance with the manufacturer’s instructions, add to the water tank
and ll with approx. 750 ml drinking water (2). Place the tank in the machine (3).
2. Place a receptacle with a capacity of at least 1 litre underneath the spouts.
3. Insert the lter holder without lter.
4. Press the buttons
and at the same time for 3 seconds to go to auto descaling program.
and ash in turn. Release the buttons, machine will go to descaling status automatically.
The water pump will work for 10 seconds and then stop for 120 seconds. This cycle will repeat
until the water tank is empty.
5. Once descaling nishes, buttons
white light will stay lit.
IMPORTANT! After descaling, rinse 2-3 times using clean water (no coffee), as
described in the “FIRST USE” paragraph. Do not forget to rinse the nozzle. The
appliance is now descaled and ready for use again.

Chat with your Krups XP 444C Virtuoso+ manual using AI

Get instant AI answers from your Krups XP 444C Virtuoso+ manual

Ask anything about the Krups XP 444C Virtuoso+. Answers come from this manual, with the pages they are based on.

XP 444C Virtuoso+ Maintenance Schedule

After each use
Clean the steam nozzle

To prevent milk from drying inside, clean the nozzle after each use by running steam with water and wiping with a damp sponge.

Regularly
Rinse the water tank

Rinse the inside of the tank regularly. Descale if a fine white layer appears.

As needed
Descale the machine

Descale when the alert light flashes or when limescale buildup is visible. Use manufacturer's instructions for descaler.

Regularly
Clean the filter holder mount

Use a damp cloth to remove coffee residues from the filter holder mount surface.

Regularly
Clean the drip tray and grill

Wash with water and mild detergent, rinse, and dry. Only the grill is dishwasher safe.

When necessary
Clean the exterior of the appliance

Wipe the outside with a damp sponge. Do not use solvents or abrasive detergents.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend XP 444C Virtuoso+?

Yes No

Frequently Asked Questions

A

Press and hold the espresso select buttons simultaneously for 3 seconds. Wait for the lights to flash. Press the selection buttons to cycle through 5, 15, or 30 minutes. When the desired time shows, release the buttons to save the setting.

Is this answer helpful?

A

Yes, the machine supports ESE pods. Insert the specific pod filter into the filter holder. Place the pod centrally. Lock the filter holder as usual. Press the espresso button to brew one cup.

Is this answer helpful?

A

The machine alerts you when descaling is needed. This typically happens after a certain number of use cycles. It is also wise to descale if you notice reduced performance or visible scale in the tank. Use a compatible descaling solution.

Is this answer helpful?

A

Yes, the drip tray grill is dishwasher safe. The main tray body should be washed with water and mild detergent. Avoid cleaning the internal electrical components of the machine in water.

Is this answer helpful?

A

The appliance operates on 220 to 240 volts AC. It is important to ensure your home supply matches these specifications to avoid damage. Do not use it on lower voltage circuits.

Is this answer helpful?

A

The nozzle might be clogged with limescale or milk residue. Clean the nozzle immediately after use. You may need to run the descaling program if scale buildup is visible. Ensure the water tank has enough water.

Is this answer helpful?

A

Yes, the machine comes with a standard two year manufacturer guarantee. This covers defects under normal domestic use. Commercial use or improper cleaning like dishwasher use for non-safe parts voids the warranty.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • 15 bar pump pressure for authentic coffee crema
  • Removable 1 liter water tank for easy refilling
  • Customizable coffee volume settings from 15ml to 65ml
  • Compatible with both ground coffee and ESE pods
  • Steam nozzle for milk frothing and hot milk
VS

Disadvantages

  • Designed for domestic use only not commercial
  • Requires manual cleaning of steam nozzle after use
  • Descaling must be performed when alert light flashes
  • No built-in automatic rinsing cycle for filters
  • Single power cord must reach wall socket directly
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Thermoblock

Power

1450 W

Color

Stainless Steel, Black

Pump Pressure

217.56 psi

Coffee System

Ground Coffee, E.S.E. Coffee Pods

Milk System

No

Water Tank Capacity

33.81 fl oz

Features

2-Cup Function, Auto shut-off after 5min, Hot Water/Steam Nozzle, Hot Water Function, Detachable Water Tank

Smart Home

No

Dimensions

5.63x11.22x11.22 in (WxHxD)

Weight

8.16 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Krups XP 444C Virtuoso+ Espresso Machine

Introduction

Welcome to your new brewing experience with the Krups XP 444C Virtuoso+. This espresso machine is designed for home enthusiasts who want barista quality drinks without the high cost of a cafe visit. It operates using a powerful 1350 Watt thermoblock heating system that ensures rapid temperature stability. The pump pressure reaches 15 bar to create authentic crema on your espresso shots. A removable water tank with a 1 liter capacity makes refilling simple and quick. You can brew directly with ground coffee or use ESE pods for convenience.

Features and Control

The control panel features intuitive buttons for one or two cup selections. A steam nozzle allows you to froth milk for cappuccinos or prepare hot milk for lattes. Adjusting the coffee volume is easy using specific button combinations. You can set custom volumes between 15 and 65 milliliters for single cups. The automatic shut off feature saves energy by turning off after 30 minutes by default. You can change this to five or 15 minutes if preferred. Maintenance involves regular cleaning of the drip tray and water tank. The drip tray grill is dishwasher safe for easier upkeep.

Important Maintenance Details

Regular descaling is necessary to prevent limescale build up inside the thermoblock. Refer to the Krups XP 444C Virtuoso+ Manual for solutions to common errors. It covers every aspect of operation and maintenance to ensure you get the most out of your investment. Safety sensors protect against overheating and low water levels. The unit dimensions fit standard kitchen counters well. Remember to unplug the power cord before performing any maintenance tasks. Always ensure the water tank is positioned correctly to avoid leaks. A two year manufacturer guarantee covers defects under normal use.

Usage and Care

This appliance is intended for domestic use only and not for commercial settings. Cleaning the steam nozzle after each use prevents milk residue hardening. Avoid using abrasive detergents on the exterior surfaces. The filter holder requires periodic rinsing under running water. Follow all safety instructions to ensure longevity. The machine displays light signals for brewing status and errors. Reset default settings if you change your volume preferences. Proper care ensures consistent hot beverages for many years. Recycling at end of life respects environmental guidelines. Enjoy your coffee every day with this reliable machine. This summary covers the main features well.

Final Thoughts

Safety first is essential for you and your family members. Brewing your own espresso saves money monthly. The design is sleek and user friendly for beginners. Setup takes only a few minutes from the box. Follow the initial rinse steps for first use. Connect to mains socket only for correct voltage. Ensure voltage matches 220 to 240 V range. Do not use extension cords for safety reasons. The appliance is built for longevity and performance. Regular use will keep it in top condition. Handle with care to avoid physical damage. Store in a dry place when not in use.

Conclusion

Your quality starts off right with this machine. You should review every section of the manual. Safety first for everyone in the household. Brewing your own espresso saves money monthly. The quality matches professional barista results. It becomes a central part of your kitchen. Consult the manual for detailed technical specs.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly