Manual.ly Logo

Krups XP 442 Virtuoso Manual

4.2 · 123 Ratings

PDF manual · 88 Pages

English

M: QW-35-FL
page

/ 88

Loading...
433d0c6e8eed0e9b289ce9706de9563fa756 page 5
54
ENGLISH
Making Cappuccino
1. Make espresso as described above using big enough cups.
2. Press steam button (11). Espresso buttons white light off, steam button orange
light keep on, the machine is pre-heating.
3. Fill a container with approximately 60 to 100 ml of cold milk.
Note :
• For the best results, use a narrow and relatively small container that can be slipped
under the steam nozzle.
• When choosing the size of the milk container, keep in mind that the milk volume will
increase by two to three times.
• We recommend using pasteurized or UHT milk at fridge temperature, and to avoid
using non-pasteurized or skimmed milk.
4. Place the steam nozzle (G1) into a container lled with milk.
5. Turn the knob (L) from preheat (L1) to steam position (L2) (25), steam button white light
ashes, the machine starts to make steam.
Note : For best results, foam the milk near the bottom of the container for approximately 10
seconds, taking care not to touch the bottom. Then slowly tilt the container and move the
nozzle upwards until it is almost at the surface of the milk. Make sure that the nozzle does
not leave the milk. To get a great foam, move the container in circular motions (26).
6. Once you have achieved the best foam turn the knob back to preheat position (27).
Note : To prevent overheating the milk, do not use the steamer for more than 45 seconds
(for 100 ml of milk).
7. Spread the milk froth over the cup(s) of espresso.
Note :
• If you wish to make more than one cappuccino, rst make all the espressos, then make
the milk froth.
• Clean the steam nozzle immediately after use to ensure it does not get clogged up with
milk residue. See “Cleaning the steam nozzle”.
Hot water preparation
1. The machine is in standby mode.
2. Place a container under the steam nozzle.
3. Turn the knob to the position (L2) (25). Espresso buttons white lights turn off, steam
button white light ash. Machine starts making hot water and it will stop when turn the
knob back to the position pre-heating (L1) (27).
STEAM FUNCTION
IMPORTANT! Warning! To prevent the milk from spattering, do not lift the
nozzle out of the milk when using “steam” mode.
IMPORTANT! Warning! The steam nozzle is still hot! Be careful you do not
burn yourself!
IMPORTANT! After switching off the steam function, clean the nozzle
immediately and carefully, as set out in the section: CLEANING AND
MAINTENANCE .
1. The machine is in standby mode.
2. Pressorfor 3 seconds. Selected espresso button orange light ashes.
3. Release the button and start set coffee volume.
4. Press the button as soon as the desired volume is reached.
5. Both espresso buttons orange lights ash 3 times to conrm the new setting.
6. The machine goes back to the standby mode.
Note : Programmable quantity for espresso 1 cup (15-65 ml, default volume 30 ml), 2 cups
(30-130 ml, default volume 60 ml).
1. The machine is in steam pre-heat status.
2. Press for 3 seconds. 2 espresso buttons orange light ash one time.
3. Water pump work one time.
4. Default coffee volume is now recovered.
5. The machine goes back to steam pre-heat status.
SETTING THE COFFEE VOLUME
RECOVER DEFAULT COFFEE VOLUME
4. Espresso buttons white lights keep on, steam button white light off.
GOOD TO KNOW – PRACTICE AFTER USING STEAM
• If you want to make an espresso after using the steam function, you need to cool down
your coffee machine to avoid burnt coffee.
• Press steam button , if espresso buttons orange light ash, it means the
temperature in boiler is too high, please do not make coffee right now. You need to
lower temperature.
• Immerse the steam nozzle in a container lled with 60 ml of water.
• Turn the knob from preheat (L1) back to steam position (L2) (25) to make hot water.
Stop make hot water until temperature goes down to pre-set value, then turn the knob
from steam to preheat position. Espresso buttons white light keep on.
CLEANING AND MAINTENANCE
Unplug (J) before each clean and let the appliance cool down rst.
Machine : Clean the outside of the appliance with a damp sponge when you think it
necessary. Do not use detergent or abrasive products. Do not use solvents or abrasive
detergents to clean the coffee machine.
Water tank : Rinse the inside of the tank regularly. When a ne white layer appears in the
tank, descale the appliance (refer to the section on descaling).
Drip tray : Clean the drip tray (I) and its grid (H) using water and a little mild detergent
(30-31). Rinse and dry.
Filter holder, lters : Using a damp cloth, clean the lter holder mount regularly in order
to remove possible coffee residues stuck to the surface. In order to prolong the useful
life of the watertight seal on the brewing head, do not put the lter holder back in place if
the coffee machine has not been used for extended periods. To remove any deposits that
could block the ow of your 1 or 2 cup lter, you may use the needle.

Chat with your Krups XP 442 Virtuoso manual using AI

Get instant AI answers from your Krups XP 442 Virtuoso manual

Ask anything about the Krups XP 442 Virtuoso. Answers come from this manual, with the pages they are based on.

XP 442 Virtuoso Maintenance Schedule

After each use
Clean the steam nozzle

To prevent milk from drying inside, clean the nozzle immediately after each use by running steam through it with water and wiping with a damp sponge.

Regularly
Rinse the water tank

Rinse the inside of the water tank regularly. Descale if a fine white layer appears.

Regularly
Clean the drip tray and grill

Clean the drip tray and its grid using water and mild detergent. Rinse and dry.

Regularly
Clean the filter holder mount

Use a damp cloth to remove coffee residues from the filter holder mount surface to maintain watertightness.

When alert appears
Descale the machine

Run the auto-descaling program when the descaling light flashes or when limescale buildup is evident. Rinse thoroughly afterwards.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend XP 442 Virtuoso?

Yes No
0
User Pic

omnis63

5 months ago

Does the milk frother on this machine actually create good foam for cappuccinos, or is it just hot water?

0
User Pic

Manual.ly

5 months ago

The Krups Virtuoso features a steam wand capable of creating milk foam. While many users report excellent results with practice and the right type of milk (such as whole milk or barista editions), some reviewers note that achieving perfect foam can require a learning curve. If you experience issues like only getting hot water, ensure you are using cold milk and fully submerging the wand tip before opening the steam valve. For those seeking consistent results without trial and error, an external handheld frother may be recommended.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Tom Baker

4 months ago

Will standard-sized latte glasses fit under the coffee spout?

M: QW-35-FL

Frequently Asked Questions

A

Fill the tank with a descaling solution and water. Press the 1-cup and 2-cup buttons simultaneously for three seconds to start the auto-descaling program. Let the cycle run until the tank is empty, then rinse thoroughly with fresh water.

Is this answer helpful?

A

Yes, the Krups XP 442 Virtuoso is compatible with all common soft coffee pods. Use the specific pod filter (F3) for best results. For larger pods, the single-cup filter is recommended.

Is this answer helpful?

A

Slow flow usually indicates the coffee grounds are too fine, too coarse, or too mealy. Try adjusting your grind size slightly. A dirty filter holder or clogged head can also cause this issue.

Is this answer helpful?

A

You should clean the steam nozzle immediately after every use. Wipe it with a damp sponge to remove milk residue before it dries inside the tube, ensuring it stays unclogged.

Is this answer helpful?

A

When the machine needs descaling, the 1-cup button light will flash white and orange alternately, while the 2-cup button light stays solid white. This is a signal to run the descaling cycle.

Is this answer helpful?

A

This appliance is designed for domestic use only. It has safety devices against overheating, but the steam nozzle and drip tray become very hot during operation. Adult supervision is required near the machine.

Is this answer helpful?

A

Yes, you can set the desired coffee volume. Hold the 1-cup or 2-cup button for three seconds until the light flashes, then press again when the desired amount is reached. The machine will remember this setting.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • 15-bar pump delivers excellent extraction pressure
  • Compatible with both ground coffee and soft pods
  • Removable 1-liter water tank for easy filling
  • Integrated steam wand for milk frothing
  • Automatic shut-off prevents overheating and saves energy
VS

Disadvantages

  • Requires regular descaling to prevent limescale buildup
  • Steam wand may cool down quickly between uses
  • Water level indicator can be hard to read when full
  • Only suitable for domestic use, not commercial settings
  • Filter holder must be tightly locked to avoid leaks
M: QW-35-FL

Product Specification

Type

Thermoblock

Power

1400 W

Color

stainless steel, black

Pump pressure

217.56 psi

Coffee system

ground coffee, coffee pods

Water tank capacity

0.26 gal

Features

2-cup function, hot water/steam nozzle, removable water tank

Dimensions

5.63x11.22x11.02 in (WxDxH)

M: QW-35-FL

Product Description

Krups XP 442 Virtuoso: Your Gateway to Perfect Espresso

The Krups XP 442 Virtuoso is a versatile pump espresso machine designed for the home enthusiast who demands quality without complexity. With its sleek design and robust 15-bar pump, this appliance extracts rich flavors from both ground coffee and soft pods. Whether you crave a quick single shot or a double espresso for sharing, the dedicated buttons make preparation effortless.

This machine features a powerful 1400-watt heating system that ensures optimal brewing temperature every time. The removable one-liter water tank simplifies refilling and cleaning, while the automatic shut-off after thirty minutes provides peace of mind and energy efficiency. Beyond just coffee, the integrated steam wand allows you to froth milk for luscious cappuccinos or prepare hot water for tea lovers in your household.

Operating on standard 220-240 volt power, the Krups XP 442 Virtuoso fits seamlessly into any kitchen counter. Its intuitive control panel guides you through preheating and brewing cycles with clear indicator lights. From the first cup to the last, this device promises consistency and reliability for daily use.

Key Features

  • Versatile Brewing: Compatible with ground coffee and soft pods.
  • Steam Function: Dedicated nozzle for creating silky milk foam.
  • Safety First: Includes overheating protection and auto shut-off.
  • Easy Maintenance: Removable parts allow for simple cleaning routines.
  • Compact Design: Dimensions of 280 x 143 x 285 mm save counter space.
M: QW-35-FL

© Copyright 2026 Manual.ly