Manual.ly Logo

Krups EA815B Manual

4.7 · 62 Ratings

PDF manual · 144 Pages

English

M: OA-GPT-54-NAN
page

/ 144

Loading...
51a16fc45be06ec74640b7d9572d23fbdfd9 page 1b
25
■A screen indicates that the appliance is heating up. Once the appliance has finished heating up, you can begin to
make steam by pressing START , and following these steps (13):
Step 1: holding the milk jug in place, insert the steam nozzle approximately 2 cm into the milk and wait for it to
start frothing.
Step 2: raise the container slightly (approximately 1 cm). Do not completely submerge the metal tube.
Step 3: gradually lower the container as the froth accumulates. (14)
■When you have frothed the milk enough, press the STOP button to stop the cycle. Warning: the cycle does not
stop immediately.
■To remove any milk traces from the steam nozzle, place a container under the nozzle and start the steam function
again (approximately 10 seconds).
■The steam nozzle is removable in order to allow for deep cleaning. Wash it with water and a little non-abrasive
detergent using a brush. Rinse and dry (15-16). Before replacing, make sure that the air holes are not clogged with
milk residue. Unclog the holes with the needle supplied with your appliance if necessary (17).
■To stop the steam, press the STOP button .
WARNING: THE CYCLE DOES NOT STOP IMMEDIATELY.
Steam can be produced for a maximum of 2 minutes per cycle.
Auto-cappuccino XS 6000 set (sold separately)
■This auto-cappuccino accessory enables you to make cappuccinos or lattes (18). Connect the different parts to
each other. Ensure that the pipe is not pierced by keeping the knob in the correct place.
■After removing the lid, fill the jug with milk (19) and place a cup or glass under the auto-cappuccino nozzle (20).
Select cappuccino or latte on the special nozzle (21).
■Start steam, as indicated in the chapter Making drinks with steam.
■Once you have made the milk froth, place your cup under the coffee jets and start a coffee cycle (22).
To prevent the milk from drying on the auto-cappuccino accessory, ensure that you clean it thoroughly. You are advised
to wash it immediately by running a steam cycle with the accessory jug filled with water in order to clean the inside
of the nozzle. For this you can use the KRUPS liquid detergent available separately.
Emptying the coffee grounds collector and the drip tray
■If the symbol starts flashing, empty and clean the drip tray (the drip tray may contain coffee grains) and the coffee
grounds collector (23-25).
■The drip tray is fitted with floats which indicate when it needs to be emptied (26). Once you have removed the coffee
grounds collector, you should empty it completely in order to avoid any overflow.
■The warning message will continue to be displayed if the coffee grounds collector is not pushed in or inserted
correctly (24). You cannot make an espresso or a coffee while the warning message is shown.
Rinsing the circuits :
Press the maintenance and settings button (27). The function indicator is shown above the maintenance button
.
If necessary, using the navigation button, select the rinse symbol .
Press START , rinsing starts and finishes when the coffee menu appears.
MAINTAINING YOUR APPLIANCE

Chat with your Krups EA815B manual using AI

Get instant AI answers from your Krups EA815B manual

Ask anything about the Krups EA815B. Answers come from this manual, with the pages they are based on.

EA815B Maintenance Schedule

Remind me when maintenance is due
Every 2 months
Replace filter cartridge

Change the Claris Aqua Filter System cartridge after a maximum of 2 months and prime it during installation.

Show in the manual (page 30)
Every 50,000 pages
Empty coffee grounds collector and drip tray

Empty and clean the drip tray and coffee grounds collector when the symbol flashes or floats indicate it is full.

Show in the manual (page 27)
After every steam cycle
Clean steam nozzle

Run a short steam cycle with water to clear milk residue, then wash the removable nozzle with soap and water.

Show in the manual (page 27)
When requested by machine
Run cleaning program

Insert a KRUPS cleaning tablet and run the automatic cleaning cycle when the cleaning symbol appears.

Show in the manual (page 28)
When requested by machine
Run descaling program

Use a KRUPS descaling sachet and run the automatic descaling cycle when the descaling symbol appears.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend EA815B?

Yes No
0
User Pic

Luca Weber

10 months ago

How loud is the grinder during brewing, and how often do I need to clean or descale the machine?

0
User Pic

Manual.ly

10 months ago

The grinding sound is normal for fully automatic bean-to-cup machines. Many users find it a bit loud at first, but you usually get used to it; the sound depends on factors like bean type, settings, and room acoustics. For cleaning, empty the used-coffee grounds container and rinse the drip tray regularly, ideally daily if you brew often. Also follow the machine prompts for rinsing/cleaning cycles. Descaling frequency depends on water hardness and how often you use the machine; if you use filtered water, descaling is typically needed less often. For exact intervals and step-by-step cleaning, please use the instructions for your specific KRUPS model and confirm the recommended water hardness level.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It can prepare ristretto, espresso, and coffee automatically, and it also supports milk-based drinks like cappuccino and café latte when using the steam function or optional accessories.

Is this answer helpful?

A

Yes. You can adjust coffee strength, volume, temperature, and the number of cups. The machine lets you fine-tune each drink so it matches your preferred taste and cup size.

Is this answer helpful?

A

A finer grind usually makes the coffee stronger and more creamy, while a coarser grind gives a lighter result. Small adjustments can noticeably change the flavor after a few cups.

Is this answer helpful?

A

Yes. It should be rinsed, cleaned, and descaled regularly. The display alerts you when maintenance is needed, and following those steps helps protect flavor and extend the machine’s life.

Is this answer helpful?

A

The Claris Aqua Filter helps improve water quality, which can enhance coffee taste and reduce limescale buildup. It is also useful for supporting long-term machine performance.

Is this answer helpful?

A

Slow flow can be caused by too fine a grind, scale buildup, or a dirty system. Weak coffee may need a finer grind, stronger setting, less water, or better beans. Rinsing and cleaning may also help.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Freshly ground beans help create richer aroma and crema.
  • LCD controls make brewing and maintenance easy to follow.
  • Custom settings let you adjust strength, volume, temperature, and cup count.
  • Steam function supports cappuccino and latte preparation.
VS

Disadvantages

  • Regular cleaning and descaling are needed to keep performance high.
  • Steam wand and milk system require manual cleanup after use.
  • Best results depend on bean quality, grind setting, and water type.
  • Some accessories, like the filter cartridge, are sold separately.
M: OA-GPT-54-NAN

Product Specification

Power

1450W

Color

black

Pump pressure

217.56psi

Coffee system

Coffee beans

Milk system

no

Grinder

adjustable conical grinder (3 levels)

Coffee quantity

adjustable (stepless)

Water quantity

adjustable (stepless)

Coffee temperature

adjustable (stepless)

Water tank capacity

0.48gal

Bean container capacity

0.61lb

Coffee grounds container capacity

9 servings

Display

yes

Special features

double height-adjustable beverage spout (2.36-4.13in), memory function (2 memory slots), automatic shut-off (adjustable), steam nozzle, frothing aid (Pannarello), variable brewing system (0.21-0.32oz), integrated water filter, automatic cleaning program, automatic descaling program

Dimensions

9.65x12.99x14.37in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Krups EA 815B Espresso Machine Manual: A Compact Bean-to-Cup Favorite

The Krups EA 815B brings the comfort of a café-style coffee routine into a home-friendly format. As part of the EA815/EA816/EA817 range, it is built for people who want fresh, automatic espresso without the complexity of a professional machine. With a 15-bar pump and a compact thermoblock system, it grinds beans just before extraction, helping each cup develop a fuller aroma and a smooth crema. From ristretto to espresso and regular coffee, the machine is designed to deliver consistent results with minimal effort.

What makes this model appealing is its balance of simplicity and control. The LCD interface guides users through brewing and maintenance, while the button layout keeps everyday use straightforward. You can adjust coffee strength, volume, temperature, and even the number of cups, making it easy to tailor drinks to different tastes. The height-adjustable coffee outlets also help reduce splashes and fit different cup sizes, whether you are preparing a small espresso or a larger morning coffee.

Milk drinks are another highlight. With the steam nozzle, you can froth milk for cappuccino or café latte, and the optional Auto-Cappuccino accessory makes the process even more convenient. The machine is built to handle both coffee and steam routines, though it benefits from regular care. That includes rinsing the circuits, emptying the drip tray and grounds container, cleaning the steam wand, and running descaling cycles when prompted. For even better performance, the manual recommends using a Claris Aqua Filter cartridge and matching the settings to local water hardness.

Overall, the Krups EA 815B is a practical choice for coffee lovers who value fresh grinding, easy navigation, and a wide range of drink options. It is not just about making coffee quickly; it is about building a repeatable home espresso experience with reliable taste and convenient maintenance.

Notes

  • Preheating cups can improve crema and serving temperature.
  • Finer grinding usually produces a stronger, richer cup.
  • Regular cleaning and descaling help preserve flavor and performance.
  • Fresh, cold water and good beans make a noticeable difference.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly