Manual.ly Logo

Kranzle K 2160 TST Manual

0.0 · 0 Ratings

PDF manual · 48 Pages

English

M: QW-35-FL
page

/ 48

Loading...
945f09178b2f8eafec4c7b2eb133f350177b page 4
4
Operating press. fully adjustable
30 - 140 bar 30 - 180 bar
Nozzle size 25042 25030
Permissible overpressure 160 bar 195 bar
Water output at
1,400 r.p.m. 11 l/min
at
1,400 r.p.m. 8 l/min
Water inlet temperature max. 60 °C max. 60 °C
Suction height 2.5 m 2.5 m
Hose drum no yes no yes
Steel braided high-pressure hose
10 m 15 m 10 m 15 m
Detergent suction yes yes
Connected load
230 V~ 50 Hz, 14 A 230 V~ 50 Hz, 14 A
Power input P 1 - 3.2 kW P 1 - 3.2 kW
Power output P 2 - 2.4 kW P 2 - 2.4 kW
Weight 37 kg 39,5 kg 37 kg 39.5 kg
Dim. incl. pulling handle in mm 900 x 375 x 360 900 x 375 x 360
Sound level acc. to DIN 45 635 78 dB (A) 81 dB (A)
Sound level with Dirtkiller
82 dB (A) 78 dB (A)
Acoustic power L
WA
89 dB (A) 91 dB (A)
Recoil at lance approx. 25 N approx. 25 N
Vibration at lance
2.0 m/s
2
2.0 m/s
2
Kränzle Kränzle Kränzle Kränzle
2160 TS 2160 TS T 2195 TS 2195 TS T
Technical data
Permissible tolerance for figures ± 5 % acc. to VDMA uniform sheet 24411

Chat with your Kranzle K 2160 TST manual using AI

Get instant AI answers from your Kranzle K 2160 TST manual

Ask anything about the Kranzle K 2160 TST. Answers come from this manual, with the pages they are based on.

K 2160 TST Maintenance Schedule

Remind me when maintenance is due
Yearly
Perform safety inspection

The machine must be inspected by a qualified person at least once every 12 months to ensure safe operation. Results must be recorded in writing.

Yearly
Change transmission oil

After the first change (50 hours), change the oil every year or after 1000 operating hours. Use 0.35 l of Motor Oil W 15/40.

Before each use
Check oil level

Check the oil level at the dipstick prior to putting the HP cleaner into operation. The machine must be in a horizontal position.

Show in the manual (page 14)
Before each use
Clean water inlet filter

Check the water inlet filter for cleanliness prior to putting the machine into operation. Clean if soiled using needle nose pliers to remove it.

Show in the manual (page 14)
After shutdown
Drain pump and clean components

Switch on motor for approx. 20 seconds to drain pump. Clean HP hose, power cable, and water filter before storing.

Show in the manual (page 19)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend K 2160 TST?

Yes No

Frequently Asked Questions

A

The Kränzle K 2160 TS requires a minimum water output of 11 liters per minute for safe and problem-free operation. Using insufficient water can lead to cavitation inside the pump, which may cause severe damage. This lack of water accelerates the wear of the joints and voids the guarantee. Always check the available water quantity by filling a bucket with a liter scale for one minute before starting the machine.

Is this answer helpful?

A

The first oil change should be carried out after approximately 50 operating hours. Subsequently, the oil needs to be changed every year or after 1000 operating hours. If the oil turns grey or white, indicating contamination, you must change it immediately. Use 0.35 liters of W 15/40 motor oil. Perform this task with the machine in a horizontal position.

Is this answer helpful?

A

Yes, direct suction is possible with a suction height up to 2.5 meters. Prior to starting, the pump and suction hose must be filled with water. Only clean water with a pH value between 7 and 9 should be used. Never suck in water containing chlorine, solvents, petrol, or oil as the seals inside are not resistant to them.

Is this answer helpful?

A

The Total Stop System ensures that the motor starts when the trigger gun is opened and stops when the gun is closed. The machine works in stand-by until the On/Off switch is turned to Off. This reduces energy consumption and prevents the motor from overheating during pauses in cleaning tasks. It effectively switches the motor off as soon as the pressure release is complete.

Is this answer helpful?

A

The warranty is valid for material and manufacturing errors for a period of 24 months for standard users. However, wear parts such as the pressure gauge, nozzle, valves, sleeves, high-pressure hose, and spray equipment are not covered. The guarantee is void if other parts than genuine Kränzle accessory parts are used or if limits are exceeded.

Is this answer helpful?

A

The machine must be connected to a protected socket with a 30mA residual current operated device and a 16A delay action fuse. If using an extension cable beyond 10 meters, the minimum cross section must be 2.5 mm. The conductors must be of high quality to prevent voltage drops that could damage the motor. Plug connections must be of a spray-proof design.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Fully adjustable pressure control up to 180 bar
  • Total Stop System reduces energy consumption
  • Steel braided high-pressure hose in TST models
  • Ergonomic handle reduces operator fatigue
  • Built-in detergent suction system
VS

Disadvantages

  • Weight ranges from 37 to 39.5 kg
  • Sound level can reach up to 91 dB
  • Requires strict minimum water flow
  • Wear parts are not covered by warranty
  • First oil change required after 50 hours of use
M: QW-35-FL

Product Specification

Operating Mode

Cold Water

Power

3200W

Pressure

435.11-2030.53 PSI

Flow Rate

max. 2.91 GPM

Mobility

Wheels

Fuel Tank

No

Weight

87.08 lbs

Package Contents

High-pressure gun, High-pressure hose (49.21 ft), 2x Lance/Spray wand (Vario-Jet), Hose reel, Power cord (16.40 ft), Hose

M: QW-35-FL

Product Description

Introduction to the Kränzle High-Pressure Washer

Operating a high-performance cleaning machine requires understanding of its specific capabilities and safety protocols. The Kränzle K 2160 TS-T Electric High-Pressure Washer Manual is an essential companion for owners of this industrial-grade equipment. Kränzle, a German manufacturer known for durability, has crafted this washer to handle demanding tasks. The unit operates with a pressure range that is fully adjustable, typically between 30 and 140 bar for standard models or up to 180 bar for others. This flexibility allows operators to switch between gentle washing and intense scrubbing without changing nozzles constantly. The TST variant specifically includes a hose drum which stores 15 meters of steel braided high-pressure hose. This drum features a hand crank for easy winding.

Technical Specifications and Safety

Incidents of accidental damage often arise from water cavitation caused by insufficient supply. The manual warns that water output must meet specific minimums, such as 11 liters per minute for this model. Ensuring adequate water flow protects the pump from rapid wear and extends the machine's lifespan. A Total Stop System is included to enhance energy efficiency. This feature stops the motor when the trigger gun is closed, preventing unnecessary heat buildup and saving electricity during pauses. The pressure gauge is mounted on the front panel and features a damping liquid to stabilize the needle reading during operation. Operators can monitor system integrity at a glance while working.

Features and Usability

Cleaning versatility is further expanded by the included detergent suction system. By using a Vario-Jet nozzle with low pressure, the machine creates a vacuum to suck cleaning agents directly from a container. This built-in injector simplifies the process of applying chemicals and rinsing them off. Safety is paramount in the design. The handle is ergonomically shaped to reduce vibration fatigue. A safety catch prevents accidental spraying when the unit is not in use. The machine weighs approximately 37 to 39.5 kilograms, making it portable yet stable on its trolley wheels. The trolley is designed to navigate difficult terrain and stairs effectively, ensuring mobility across various job sites without damaging floors or causing operator strain during transport.

Maintenance and Warranty Information

Regular maintenance is required to keep the warranty valid and the machine running smoothly. Oil changes are recommended after the first 50 hours of operation and then annually or every 1000 hours. Using the correct oil, such as W 15/40 motor oil, is critical. The manual also details how to handle frost protection for winter storage. Checking the water inlet filter and ensuring connections are tight are part of the routine checks. The Kränzle K 2160 TS-T Electric High-Pressure Washer Manual covers all these aspects to ensure safe and efficient operation. Users should keep the manual in a safe place as it contains vital troubleshooting steps. Whether for commercial cleaning or private heavy-duty tasks, knowing the operational limits is vital. This guide highlights the balance of power and precision provided by Kränzle engineering. Electrical connections vary by model voltage, typically 230 V or 400 V depending on the region. Users must ensure the socket has a 30mA residual current operated device for safety. The warranty period extends to 24 months for users and 12 months for industrial use.

M: QW-35-FL

© Copyright 2026 Manual.ly