Kranzle Foam Injector Manual
PDF manual · 44 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kranzle Foam Injector manual using AI
Get instant AI answers from your Kranzle Foam Injector manual
Ask anything about the Kranzle Foam Injector. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Foam Injector?
Yes NoFrequently Asked Questions
It doses compatible detergent into the high-pressure water stream and creates foam as the mixture exits the nozzle. The foam can then be applied to the surface before a separate rinse step.
Is this answer helpful?
It is intended for washable surfaces such as paint, glass, stone, and wood. Common uses include vehicles, garden furniture, walls, facades, terraces, driveways, paths, and caravans.
Is this answer helpful?
Use only cleaning products made for foaming and use with high-pressure cleaners. Do not mix detergents. Strong acids with a pH below 4, including formic and hydrofluoric acid, are unsuitable.
Is this answer helpful?
For an effective cleaning result, allow the applied detergent to work for about three minutes. Rinse remaining cleaner with an appropriate lance, such as a flat-jet stainless-steel lance.
Is this answer helpful?
Yes. The first rotating adjustment changes between flat and spot jets. A second adjustment rotates the flat jet between vertical and horizontal spray positions.
Is this answer helpful?
Switch off and depressurize the cleaner first. Rinse the hose to remove residue, then carefully clear a blocked nozzle opening if necessary. Reconnect the injector and flush the system with water.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Creates foamed detergent coverage that can cling to surfaces before rinsing.
- Adjustable flat or spot jet plus horizontal or vertical spray alignment.
- Suitable for paint, glass, stone, wood, vehicles, patios, facades, and more.
- Available with D10, D12, or M22x1.5 connection options and 1-liter or 2-liter containers.
Disadvantages
- Requires detergent specifically suitable for foaming and high-pressure cleaners.
- Not suitable for strong acids with a pH value below 4.
- Spot-jet use requires a large safety distance to help avoid surface damage.
- Nozzle and container need rinsing after each use to prevent residue and clogging.
Product Specification
Compatible with
Kränzle pressure washers (D12 quick coupling)
Product Description
Kraenzle Foam Injector Foam Nozzle - Read, Download & Print Free
The Kraenzle Foam Injector Foam Nozzle is a practical high-pressure cleaning accessory designed to turn compatible cleaning solutions into rich, clinging foam. Connected directly to the trigger gun in place of a standard cleaning lance, it combines detergent with the water stream and applies the mixture evenly across the target surface. This makes pre-washing easier while helping cleaning agents remain in contact with dirt for longer.
Built for versatile exterior cleaning
This foam injector is suitable for a broad range of washable surfaces, including paintwork, glass, stone, and wood. It can support cleaning tasks around vehicles, caravans, garden furniture, conservatories, facades, paths, stairways, walls, shutters, driveways, and terraces. The transparent detergent container makes it simple to monitor fluid level during use, while 1-liter and 2-liter bottle options provide flexibility for quick jobs or larger areas.
Adjustable foam application
The nozzle guard includes two rotating adjustment elements. One changes the output between a flat jet and a spot jet, while the second turns the flat spray pattern between vertical and horizontal positions. This flexibility helps users cover wide sections efficiently or direct foam toward more specific areas. For best results, the applied cleaner should be allowed to work for around three minutes before rinsing with a suitable high-pressure lance.
The flat jet is recommended at a working distance of approximately 0.3 to 8 meters. The spot jet requires much greater care, with an 8 to 10 meter distance advised to reduce the chance of surface damage. Always test the cleaning setup on an inconspicuous section when working with sensitive finishes.
Connection choices and operating limits
Kraenzle offers versions with D10 quick-release, D12 quick-release, and M22x1.5 male screw connections. Light D10 models support operating pressures from 80 to 250 bar, while D12 and M22 versions are rated up to 250 bar. All listed versions have a maximum fluid temperature of 60 C / 140 F. Choose the connection style and container capacity that match the high-pressure cleaner and intended workload.
Notes for safe care
Only use foam-capable cleaning products approved for high-pressure cleaning, and never mix detergents. Do not use strong acids with a pH below 4. Wear suitable protective clothing and gloves, never aim the jet at people or animals, and keep the tool away from children or untrained users. After every use, rinse the nozzle and container with clean water. If foam stops flowing despite full pressure, the nozzle may be blocked and should be cleaned carefully after the system has been depressurized.
Search for 67,706 Manuals online
Type-in Brand or Model