Knipex Flat Cable Stripping Pliers Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Knipex Flat Cable Stripping Pliers manual using AI
Get instant AI answers from your Knipex Flat Cable Stripping Pliers manual
Ask anything about the Knipex Flat Cable Stripping Pliers. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Flat Cable Stripping Pliers?
Yes NoFrequently Asked Questions
They are intended for stripping flat cable insulation. Their design includes replaceable blade blocks, allowing worn cutting components to be renewed as part of tool maintenance.
Is this answer helpful?
The instructions identify Knipex models 12 64 180 and 12 74 180. Confirm the model marking on your tool before ordering or installing replacement blade blocks.
Is this answer helpful?
No. Blade blocks should always be replaced in pairs. Using a matched pair helps maintain even operation and avoids combining a new blade with a worn component.
Is this answer helpful?
Slightly bend back the safety clamps, then push the blade blocks out sideways. Work carefully to avoid damaging the clamps or blade-guide area.
Is this answer helpful?
Apply two-component adhesive to the blade guides before inserting the new blade blocks. Use the adhesive according to the product manufacturer's handling and curing instructions.
Is this answer helpful?
Press the new blade blocks into the guides from the side after applying adhesive. Secure them with the safety clamps and verify that the blocks are firmly retained before use.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Replaceable blade blocks can extend the useful service life of the pliers.
- Paired blade replacement supports balanced stripping performance.
- Safety clamps help retain blade blocks after installation.
- The 180 mm size is compact for routine cable-preparation work.
Disadvantages
- Blade replacement requires two-component adhesive.
- Both blade blocks must be replaced together, even if only one appears worn.
- Safety clamps must be carefully bent back and secured during maintenance.
- Adhesive curing time may delay returning the tool to service.
Product Specification
Head
Steel
Handle
Plastic
Cutting capacity
Cable 0.47 in
Stripping capacity
AWG 18-14
Overall length
7.09 in
Features
AWG 18-14
Weight
4.41 oz
Product Description
Knipex Flat Cable Stripping Pliers, 180mm - Read, Download & Print Free
Knipex Flat Cable Stripping Pliers, 180mm are purpose-built hand tools for controlled work on flat cable insulation. Produced by Knipex in Germany, these pliers are designed around replaceable blade blocks, helping professionals and careful DIY users maintain consistent stripping performance over the working life of the tool.
Designed for Serviceable Cable Work
A key feature of this 180 mm Knipex design is its blade-block system. Rather than treating the cutting section as a permanent component, the construction allows blade blocks to be exchanged when they become worn or damaged. This can help preserve the tool's usefulness while supporting cleaner, more reliable cable preparation.
The blade replacement process is structured around paired components. Both blades should always be replaced together, helping maintain balanced operation across the stripping mechanism. Safety clamps hold the blade blocks in position, while blade guides provide the mounting area for replacement parts. Two-component adhesive is used on the blade guides during installation to secure the new blade blocks correctly.
Blade Replacement Overview
For safe maintenance, begin by slightly bending back the safety clamps. The existing blade blocks can then be pushed out sideways. Apply suitable two-component adhesive to the blade guides before pressing the new blade blocks into place from the side. Finally, secure the installation with the safety clamps.
This sequence emphasizes accurate fitting rather than rushed replacement. Working carefully with matched blade pairs and properly secured clamps can help maintain the intended function of the pliers. Allow adhesive to cure according to its manufacturer's instructions before putting the tool back into service.
Practical Benefits for Users
The compact 180 mm format makes these pliers a practical addition to an electrical tool kit where flat cable preparation is required. Their serviceable blade arrangement is especially useful for users who value maintainability and want to replace worn cutting elements instead of discarding an otherwise functional tool.
Knipex Flat Cable Stripping Pliers, 180mm - Read, Download & Print Free is a useful reference for understanding the blade-change method associated with Knipex models 12 64 180 and 12 74 180. The instructions focus on the essential components: safety clamps, blade blocks, and blade guides.
Notes
- Always replace blade blocks as a matched pair.
- Use an appropriate two-component adhesive on the blade guides.
- Check that safety clamps securely retain the replacement blade blocks.
- Follow normal workshop safety practices and use compatible replacement parts.
Search for 67,706 Manuals online
Type-in Brand or Model
Liam Carter
6 months ago
Can this tool strip the outer insulation of a 6-core telephone flat cable without damaging the small internal wires?
Manual.ly
6 months ago
Yes. Although the stated stripping range is 0.75 to 2.5 mm2, one reviewer successfully used it on the outer jacket of a 6-core telephone flat cable. It provided a cleaner result than using a knife, which can easily nick the individual conductor insulation. For the very small 0.14 mm2 inner wires, use a suitable fine-wire stripper.