Manual.ly Logo

Kind Shock LEV Ci Manual

0.0 · 0 Ratings

PDF manual · 150 Pages

English

M: OA-GPT-5-NAN
page

/ 150

Loading...
1eb52d52210c39ac7dc4eb0afe5c0c1193af page 4
i
PLEASE READ THIS FIRST
ATTENTION
WARNING
Thank you for purchasing a new KS Height Adjustable Seatpost.
Your new seatpost is warranted for a period of two years from the
date of purchase. The warranty is expressly limited to the repair or
replacement of the defective part and is the sole remedy of the
warranty. The warranty applies only to the original owner and is
not transferrable. Proof of purchase is required to validate
warranty eligibility. The warranty does not cover normal wear and
tear, routine maintenance, improper installation or improper use
of the seatpost. Modification of the seatpost in any manor shall
void the warranty. Kind Shock Hi-Tech Co. Ltd. shall not be
responsible for incidental or individual costs incurred by the
warranty service provider that are not covered by this warranty.
The user assumes the risk of any personal injury or property
damage, including damage to the seatpost, and any other
losses, if the seatpost is modified or improperly used at any time.
This warranty gives the consumer specific legal rights and those
rights vary from state to state. This warranty does not affect the
statutory rights of the consumer.
This is a high performance product. It will give you reliable service
if it is installed properly and regularly maintained by an authorized
KS Service Center. Please read through these instructions fully and
follow them careful before you install your new seatpost.
KS Height Adjustable Seatposts must be regularly maintained by
an a qualified service technician. If you need assistance locating
a qualified service technician, more information can be found at
http://www.kssuspension.com. Service center locations can be
found at www.kssuspension.com. Do not disassemble your
seatpost. Disassembly could cause damage and severe
personally injury as some of the contents are under pressure.
Failure to follow these warnings and instructions will immediately
void your warranty.
2

Chat with your Kind Shock LEV Ci manual using AI

Get instant AI answers from your Kind Shock LEV Ci manual

Ask anything about the Kind Shock LEV Ci. Answers come from this manual, with the pages they are based on.

LEV Ci Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Clean and lubricate seatpost

Clean and lubricate the seatpost at least every six months. Use more frequent intervals for wet, dusty conditions, or after high-pressure washing.

Show in the manual (page 23)
Before each ride
Check seatpost security and function

Ensure the seatpost is secure in the frame, all bolts are torqued correctly, there is no excessive wear or leakage, and it functions properly.

Show in the manual (page 23)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend LEV Ci?

Yes No

Frequently Asked Questions

A

The manual covers LEV-Ci, LEV Integra, LEV-Si, e30-i, Crux-i and eTen-i models of Kind Shock height-adjustable seatposts.

Is this answer helpful?

A

LEV Integra requires a frame prepared for internal cable routing and seat tube inner diameters of 27.2, 30.9, 31.6 or 34.9 mm. Do not drill or modify the frame; contact your frame manufacturer or KS if unsure.

Is this answer helpful?

A

Seat collar: max 6–7 N·m. Saddle clamp bolts: typically 10 N·m (8 N·m for LEV-Ci). Crux-i head bolts: up to 15 N·m. eTen-i head bolt: up to 22 N·m. Binder bolt for carbon mast: do not exceed 5 N·m.

Is this answer helpful?

A

Temporarily mount the remote in the desired handlebar position, route housing through the frame, turn handlebars 90° and remove slack. Mark where housing exits the seat collar, then mark again 110 mm toward the bars — cut housing to that final length.

Is this answer helpful?

A

Yes: many LEV Integra models allow return-speed tuning by adjusting internal air pressure (recommended range 100–250 psi or 150–250 psi in some notes). Never exceed 250 psi and use a compatible high-pressure pump like the KS AIR-8.

Is this answer helpful?

A

Inspect before every ride for secure fit, wear and leaks. Clean and lubricate at least every six months; more frequent service is required in wet or dusty conditions or after high-pressure washing. Use authorized KS service centers for periodic servicing.

Is this answer helpful?

A

Warranty is voided by improper installation, unauthorized modification or disassembly, normal wear, lack of proof of purchase, or failure to follow safety and service instructions.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Internal cable routing (Integra) yields clean cockpit and protected cable path.
  • Carbon mast option (LEV-Ci) reduces weight while retaining telescopic function.
  • Adjustable return speed via air pressure for custom feel (recommended 100–250 psi).
  • Detailed installation procedure and model-specific torque specs ensure safe setup.
  • Broad model range (LEV-Ci, LEV Integra, LEV-Si, e30-i, Crux-i, eTen-i) covers many rider needs.
VS

Disadvantages

  • Requires frame with internal routing; not compatible with all frames without modification.
  • Installation and service require mechanical skill or authorized service center.
  • Incorrect torque, improper lubrication or disassembly void warranty and risk damage.
  • Regular maintenance required (clean/lubricate at least every 6 months; more in harsh conditions).
  • Air-pressure return adjustment demands a compatible high-pressure shock pump and care (max 250 psi).
M: OA-GPT-5-NAN

Product Specification

Type

Telescopic seatpost

Colors

black

Operation

Remote control

Cable routing

internal

Material

Aluminum, Carbon

M: OA-GPT-54-NAN

Product Description

Kind Shock LEV Ci Teleskop-Sattelstütze Manual

The Kind Shock LEV Ci is a premium height-adjustable (teleskop) seatpost family that includes LEV-Ci, LEV Integra, LEV-Si, e30-i, Crux-i and eTen-i. Designed for frames with internal cable routing, these seatposts deliver reliable dropper performance for trail, enduro and all-mountain riding when installed and maintained correctly. The LEV-Ci features a carbon composite mast and lightweight internals; Integra models route the remote cable fully inside the post for a clean cockpit. Variants differ in remote options, head clamp designs and recommended torque values for saddle clamp bolts.

Installation and setup require attention to frame compatibility, minimum insertion depth and correct cable/housing routing. Kind Shock emphasizes applying a friction/anti-seize compound (not grease) inside the seat tube, using specified ferrules and lock ends, and cutting housing to the universal 110 mm final length from the seat collar. The manual walks through fitting the remote lever (left or right), routing housing through the frame, trimming housing, installing ferrules, threading the inner wire and securing the locking cable end. For LEV-Ci the manual also covers special installation steps for the Recourse ultralight cable option.

Saddle mounting and clamp torque values vary by model: typical head clamp bolts tighten to 10 N·m (8 N·m for LEV-Ci), Crux-i uses up to 15 N·m, and eTen-i up to 22 N·m. The frame seat collar should be tightened to a maximum of 6–7 N·m. For carbon-mast models, use carbon assembly compound and never exceed 5 N·m on the binder bolt.

LEV Integra and related models allow adjustment of return speed via internal air pressure. Recommended operating pressures are generally 100–250 psi (some passages reference 150–250 psi); never exceed 250 psi. Adjustments require removing the saddle/clamp and using a compatible high-pressure shock pump (KS AIR-8 recommended).

First-use notes explain that initial cycling may need a firm downward nudge to redistribute oil around seals. Regular pre-ride checks and periodic maintenance are stressed: inspect for wear and leaks, confirm bolts and function, clean and lubricate at least every six months (more often in wet or dusty conditions), and use authorized KS service centers for repairs. Warranty covers defects for two years to original owner, but excludes misuse, improper installation, normal wear or unauthorized modification which voids warranty.

Notes:

  • Do not drill or modify frames; internal routing compatibility is required.
  • Use torque wrenches and follow model-specific torque limits.
  • Do not disassemble the post; high-pressure components can be hazardous.

Pros and cons below highlight core advantages and limitations of the LEV Ci family.

M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly