Manual.ly Logo

Kaufmann TopLine Standard Light Manual

0.0 · 0 Ratings

PDF manual · 8 Pages

English

M: OA-GPT-5-NAN
page

/ 8

Loading...
f4204b78a44855ce419778eb04477f403881 page 2
Transportsicherung
Transport lock
Um Bewegungen bzw. Beschädigung des Schneidkopfes beim Transport zu verhindern, ist dieser mit
der Transportsicherung (Pos. 17a) an der Führungsschiene (Pos. 29) fixiert. Bitte lösen Sie die Transport-
sicherung vor dem Gebrauch der Maschine. Den Anschlagwinkel können Sie für den Transport bzw. die
Lagerung mithilfe des Winkelklemmhalters (Pos. 39) an die Maschine fixieren. Achten Sie darauf, dass die
Kerben auf der Unterseite des Winkels auf der Winkelhalteplatte (Pos. 36) einrasten.
To prevent the cutting head from movements respectively damages during transport, it is fixed with the
transport safety bolt (pos. 17a) on the guide rail (pos. 29). Please untighten it before using the machine.
The stop-angle can be locked with the machine with the tool holder (pos. 39). Make sure that the notches
at the bottom side of the angle lock in the angle fastening plate (pos. 36).
Reinigung und Wartung
Cleaning and maintenance
Achtung! Kein Öl oder Fett an die Führungsstange oder den Schneidkopf geben. Beim Schneiden
von Fliesen können sich durch Öl und Staub schwarze Streifen an der Führungsstange (Pos. 29) bilden.
Reinigen Sie diese Verschmutzung mit einem Kriechöl (z.B. WD 40) und einem Baumwolltuch. Für hart-
näckigen Schmutz kann auch ein Schleifvlies verwendet werden. Führungsstange anschliessend trockenrei-
ben. Achtung! Immer mit trockener Führungsstange arbeiten, nicht einfetten und nicht einölen.
Kontrollieren Sie regelmäßig die Leichtgängigkeit und den Rundlauf des Hartmetall-Schneidrads. Schmie-
ren Sie in regelmäßigen Abständen die Achse (Pos. 10) mit einem handelsüblichen Schmierfett. Bei Abnüt-
zung wechseln Sie das Schneidrad bzw. die Achse (Steckschlüssel SW 10). Das Hartmetall-Schneidrad, die
Achse sowie jedes Einzelteil sind als Original Kaufmann Ersatzteile erhältlich und gewährleisten eine opti-
male Funktionalität. Anwendervideo und Produktinformation sehen Sie unter www.kaufmann-tools.at.
Dirt on the guide bar (pos. 29) can be removed with a penetrating oil (e.g. WD-40) and a cotton cloth. For
persistent dirt an abrasive fleece can be used. It is important that the guide bar is afterwards rubbed dry
with a soft cotton cloth. Caution! Keep the guide bar during work always dry. Oil or grease it only
for a longer storage!
Check regularly the free movement and true running of the tungsten carbide cutting wheel. Grease the
spindle (pos. 10) in regular intervals with standard grease. In case of abrasion change the cutting wheel
respectively the spindle (socket wrench size 10). The tungsten carbide cutting wheel, the spindle as well as
every single part are available as original Kaufmann replacement parts and guarantee an optimal functio-
nality. Application video and product information you can view at www.kaufmann-tools.at.
2
Vielen Dank, dass Sie sich für die TopLine STANDARD von Kaufmann
entschieden haben. Sie haben damit eine der besten Fliesenschneidma-
schinen auf dem Markt erworben. Alle Fliesenschneidmaschinen von
Kaufmann werden in Österreich entwickelt und produziert. Bitte beach-
ten Sie die folgenden Hinweise und Anleitungen.
Thank you for choosing the TopLine STANDARD from Kaufmann. You
have taken decision for one of the best tile cutting machines on the mar-
ket. All tile cutting machines from Kaufmann are designed and
manufactured in Austria. Please take notice of the following instructions
and manuals.

Chat with your Kaufmann TopLine Standard Light manual using AI

Get instant AI answers from your Kaufmann TopLine Standard Light manual

Ask anything about the Kaufmann TopLine Standard Light. Answers come from this manual, with the pages they are based on.

TopLine Standard Light Maintenance Schedule

Regularly
Check cutting wheel movement and true running

Check regularly the free movement and true running of the tungsten carbide cutting wheel.

Regular intervals
Grease the spindle

Grease the spindle (pos. 10) in regular intervals with standard grease.

As needed
Clean guide bar dirt

Remove dirt on the guide bar with penetrating oil and a cotton cloth, then dry thoroughly.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend TopLine Standard Light?

Yes No

Frequently Asked Questions

A

The TopLine STANDARD is offered in multiple cutting lengths: 480 mm, 630 mm, 720 mm, 920 mm and 1250 mm. The 1250 mm model features two guide rails, side support extensions and transport wheels for easier handling of larger tiles.

Is this answer helpful?

A

Remove dirt with a penetrating oil (e.g., WD-40) and a cotton cloth; use an abrasive fleece for stubborn grime. After cleaning, rub the guide rail dry with a soft cotton cloth and keep it dry during operation. Oil or grease only when storing the cutter long-term.

Is this answer helpful?

A

Check the cutting wheel regularly for true running and wear. If you notice reduced cutting quality, rough edges or wobble, replace the tungsten carbide wheel or spindle. Kaufmann offers original replacement parts for proper fit and performance.

Is this answer helpful?

A

Yes. Kaufmann offers accessories including TiN and PROFI cutting wheels, plastic-core wheels, mosaic breakers, safety pads for the breaker, an accessory box, a worktable with optional extensions and transport wheels, and additional supporting surfaces for larger lengths.

Is this answer helpful?

A

Fix the side supporting surfaces and transport wheels to the base using the supplied screw set and an open-ended spanner (wrench size SW 10). Ensure the guiding head is secured with the transport safety bolt during assembly.

Is this answer helpful?

A

Always untighten and remove the transport safety bolt before use. Lock the stop-angle properly so its notches engage the angle fastening plate, and ensure the guide rail is clean and dry. Use anti-slip pads and accessory breaker safety shoes as needed.

Is this answer helpful?

A

Kaufmann provides application videos and product information on their website at www.kaufmann-tools.at, where you can also find details about original spare parts and accessory options.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Precise trapezium-guided cutting with adjustable 90° and 45° angle stops and millimetre scale.
  • Available in multiple lengths including 1250 mm with dual rails, side supports and transport wheels.
  • Uses durable tungsten carbide cutting wheels with easy replacement and available original spare parts.
  • Simple maintenance: clean guide bar with penetrating oil and dry, grease spindle periodically.
  • Wide accessory range (breakers, safety pads, worktable, wheels) for versatile tile tasks.
VS

Disadvantages

  • Requires manual effort; not suitable for high-volume automated production.
  • Guide bar must remain dry during use — contamination control needed in dusty or oily sites.
  • Replacement of cutting wheel or spindle requires tools (SW 10) and basic mechanical skill.
  • Transport safety bolt must be removed before use — extra step that can be overlooked.
  • Larger models add complexity and weight despite transport wheels; setup takes time.
M: OA-GPT-5-NAN

Product Specification

Cutting length

24.80 in

Cutting capacity

0.63 in

Weight

25.79 lbs

M: OA-GPT-54-NAN

Product Description

Kaufmann Topline Standard light Tile Cutter, manual

The Kaufmann Topline Standard light tile cutter is a robust, manually operated cutting tool designed for precision tile work. Engineered and manufactured in Austria, this cutter is available in multiple cutting lengths (480, 630, 720, 920, 1250 mm) and combines a stable guide system with a tungsten carbide cutting wheel for clean, reliable cuts. Ideal for DIY enthusiasts and professional tilers, the TopLine STANDARD emphasizes durability, ease of maintenance, and accurate results.

Key features and usage

The machine uses a trapezoid guide rail and adjustable angle stop that locks for 90° and 45° cuts, with a millimetre scale for fine adjustments. Larger models (1250 mm) include two guide rails, side support extensions and transport wheels for easier handling. Accessories and replacement parts such as different types of cutting wheels (TiN, PROFI, plastic-core), spindles, anti-slip pads, breaker attachments and safety pads make the cutter adaptable for a wide range of tile sizes and materials.

Maintenance is straightforward: keep the guide bar dry and free of oil to prevent black streaks, clean deposits with penetrating oil and a cotton cloth or abrasive fleece, then dry thoroughly. Grease the spindle periodically and replace the tungsten carbide cutting wheel or spindle when worn. Original Kaufmann spare parts ensure continued performance.

Practical assembly tips include fixing the cutting head with the transport safety bolt when mounting accessories, and locking the stop-angle with the angle clamp for transport or storage. For the 1250 mm model, mount side supports and transport wheels with a wrench (SW 10) using the supplied hardware.

Why choose the TopLine STANDARD

This cutter delivers consistent, straight cuts thanks to its trapezium guidance and rigid construction. The availability of accessories (breaker for mosaics, safety pads, worktable and extensions) and original wear parts makes it a long-term workshop asset. Clear maintenance guidance and an instructional application video from Kaufmann support reliable operation.

Notes

  • Always release the transport safety bolt before use.
  • Keep the guide rail dry during operation; oil only for long-term storage.
  • Use the specified wrench (SW 10) for assembly and part replacement.
  • Genuine Kaufmann spare parts maintain optimal performance.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly