Kathrein EXR 58 Eco Manual
PDF manual · 4 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kathrein EXR 58 Eco manual using AI
Get instant AI answers from your Kathrein EXR 58 Eco manual
Ask anything about the Kathrein EXR 58 Eco. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EXR 58 Eco?
Yes NoFrequently Asked Questions
The EXR 58 Eco distributes four satellite polarities (V/H, low/high) and terrestrial signals to eight subscriber outputs. Satellite IF covers 950–2150 MHz and terrestrial range covers 5–862 MHz.
Is this answer helpful?
Not necessarily. The connected receivers can supply the LNB via the horizontal low input so the unit can operate without its own power. For continuous LNB feeding (e.g., cascades), the optional NCF 18 plug-in power supply can be connected to the DC socket.
Is this answer helpful?
Install only in dry indoor locations. Use an equipotential bonding wire (Cu, at least 4 mm²), follow EN 60728-11 and EN 62368-1, use screws max Ø 4 mm, and terminate unused RF ports with 75 Ω resistors.
Is this answer helpful?
The unit supports eight subscriber connections; one coaxial drop per receiver is sufficient (two for twin receivers). Ensure coax inner conductor diameter is 0.6–1.2 mm and free of burrs to avoid socket damage.
Is this answer helpful?
Permitted ambient temperature ranges from -20 °C to +55 °C. Connections are standard F-type 75 Ω connectors per EN 61169-24; unused ports should be terminated with 75 Ω resistors.
Is this answer helpful?
Maximum total remote feed current is 350 mA. This limits how many or what type of LNBs can be powered from the multiswitch; for larger installations or cascades, consider the optional external power supply.
Is this answer helpful?
This is electronic equipment and must not be disposed of with household waste. Follow directive 2012/19/EU and take the unit to an authorized public collection point for electronic waste recycling.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Distributes four satellite polarities plus terrestrial signals to eight outputs with single-drop per receiver.
- Integrated amplifier and pre-emphasis reduce cable attenuation and preserve signal levels over long runs.
- High output decoupling minimizes cross-talk between subscriber connections.
- LNB remote feed via horizontal low input; optional NCF 18 for continuous LNB power in cascaded setups.
- Compact, indoor-rated design with F-type connectors and compliance with EN 60728-11 and EN 62368-1.
Disadvantages
- Requires dry indoor mounting and proper equipotential bonding; not suitable for outdoor or damp locations.
- Limited total remote feed current (350 mA) may restrict powering multiple high-current LNBs.
- Inner cable conductor diameter must be 0.6–1.2 mm and burr-free to avoid damaging sockets.
- Optional external power supply (NCF 18) not included, adding potential extra cost for cascaded systems.
- Maximum connection loss and frequency-dependent attenuation require careful planning for long cable runs.
Product Specification
Satellite Inputs
4
Terrestrial Inputs
1
Outputs
8
Satellite Positions
1
Dimensions
6.38x1.69x5.83in (WxHxD)
Product Description
Kathrein EXR 58 Eco — Reliable Multiswitch for Small to Medium Installations
The Kathrein EXR 58 Eco is a compact, robust multiswitch designed to distribute four satellite polarities plus terrestrial signals to up to eight subscriber connections. Built for indoor installation, it simplifies multisatellite distribution by requiring only one drop cable per receiver (two for twin receivers) and enabling independent horizontal/vertical and low/high selection directly from each receiver via standard 14/18 V and 0/22 kHz control signals.
This unit integrates a low-noise amplifier and pre-emphasis network to offset cable attenuation and maintain strong SAT-IF levels across the 950–2150 MHz band while also passing terrestrial signals across a wide 5–862 MHz range. High output decoupling minimizes interference between subscriber outputs, and the device supports LNB remote feeding through the horizontal low input. When receivers provide LNB power, the multiswitch requires no additional power; optionally, an NCF 18 power supply can be connected to the DC socket to maintain continuous LNB supply for cascaded or loop-through layouts.
Compact and user-friendly, the EXR 58 Eco features F-type connectors, clearly marked inputs and outputs, and mounting provisions suitable for dry indoor environments. Its construction includes measures for equipotential bonding and follows applicable safety standards (EN 60728-11, EN 62368-1). The device is rated to operate from -20 °C to +55 °C and offers practical installation guidance—such as ensuring inner conductor diameters between 0.6–1.2 mm and burr-free cables to avoid socket damage.
Ideal for apartments, small hotels, or shared installations, this multiswitch balances solid RF performance with straightforward operation. Its built-in pre-emphasis improves long-cable performance; high decoupling preserves signal integrity between outputs; and optional external power enables flexible system topologies. Kathrein provides compliance documentation and recommends proper electronic waste disposal at end of life.
Notes
- Suitable for DVB-T/T2 terrestrial reception.
- Maximum total remote feed current: 350 mA; use the DC socket with NCF 18 for continuous LNB supply when needed.
- Terminate unused RF outputs with 75 Ω resistors to prevent reflections.
- Observe equipotential bonding and follow EN standards for safe installation.
Search for 67,706 Manuals online
Type-in Brand or Model