Manual.ly Logo

Kathrein EXR 156 Manual

5.0 · 1 Ratings

PDF manual · 8 Pages

English

M: OA-GPT-5-NAN
page

/ 8

Loading...
97a7b90b8504db14761952730421d6361360 page 5
1 / 4
•
Multiswitch for distribution of 4 Sat levels and terrestrial signals to
6, 8, 12 or 16 connections
•
Only one drop cable per receiver needed (two for twin receivers)
•
Independent horizontal/vertical, low/high selection from each
receiver
•
Switching via coaxial cable at 14/18V and 0/22 kHz signal frequency
•
Integrated amplifi er for low attenuation in Sat and terrestrial
signal range
•
Integrated pre-emphasis to equalise cable attenuation
•
Terrestrial signals also receivable with Sat receiver switched o
•
High decoupling between outputs
•
Remote feed via horizontal low input. All other inputs are
DC blocked (enabling operation with UAS 485).
•
Low power consumption due to high-e ciency short-circuit-proof
switch-mode power supply unit
•
For indoor installation
Multiswitch
Type EXR 156 EXR 158 EXR 1512 EXR 1516
Order no. 20510011 20510012 20510013 20510014
Subscriber connections 6 8 12 16
Inputs 1 x terr. 4 x Sat-ZF 1 x terr. 4 x Sat-ZF 1 x terr. 4 x Sat-ZF 1 x terr. 4 x Sat-ZF
Frequency ranges MHz 47-862 950-2150 47-862 950-2150 47-862 950-2150 47-862 950-2150
Attenuation ¹
)
dB 4-0 12-7 4-0 12-7 8-4 12-7 8-4 12-7
Horizontal/vertical isolation dB - 25 - 25 - 25 - 25
Output isolation dB 25 25 25 25 25 25 25 25
Max. output level ²
)
dBµV 95 105 95 105 89 105 89 105
Screening factor dB 5-300 MHz > 85, 300-470 MHz > 80, 470-1000 MHz > 75, 1000-2150 MHz > 55
Vertical/horizontal input control V 12-14.5/16-19
Low/High band control kHz 0/22
Current consumption per subscriber mA < 25
Nominal input voltage V 198-253
Nominal input power (max./only with UAS 484) W 14/6.5
Secondary voltage ³
)
V 18
Max. total remote feed current ³
)
mA 550
Protection class/protection type II (totally insulated)/IP 30
Permissible ambient temperature °C -20 to +55
Connections F connectors
Dimensions, W x H x D mm 215 x 148 x 43 295 x 148 x 43
Packing unit/Weight
units/
kg
1 (10)/0.65 1 (10)/1.0
¹
)
Frequency-dependent attenuation (pre-emphasis)
²
)
Terr. acc. to EN 50083-5, 60-dB-KMA; SAT acc. to EN 50083-3, 35-dB-IMA
³
)
Via horizontal low input
EXR 156 20510011
EXR 158 20510012
EXR
1512
20510013
EXR
1516
20510014
Sat IF Distribution System Multiswitch
suitable for DVB-T/T2

Chat with your Kathrein EXR 156 manual using AI

Get instant AI answers from your Kathrein EXR 156 manual

Ask anything about the Kathrein EXR 156. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EXR 156?

Yes No
0
User Pic

maria_k

10 months ago

Is the multiswitch easy to install (wall mounting and wiring), and does it work reliably as a replacement for a broken one?

0
User Pic

Manual.ly

9 months ago

Yes. The multiswitch is designed for straightforward installation: mount it securely to the wall, connect the cables according to the labeling in the manual, and then power it up. The reviews confirm that after replacing a defective unit from another brand, the device worked right away once installed correctly. For best reliability, double-check that each connection matches the intended input/output (especially satellite/cable types) and ensure the signal cables are properly seated and not damaged. If anything is unclear, follow the wiring diagram for your setup and verify compatibility with your receiver and antenna system.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The EXR 156 distributes four satellite IF levels (950–2150 MHz) and terrestrial TV signals (47–862 MHz) to multiple subscriber outputs, suitable for DVB-T/T2 and satellite reception.

Is this answer helpful?

A

Receivers switch horizontal/vertical and low/high bands over the coaxial cable using standard control voltages (14/18 V) and tone switching (0/22 kHz), allowing independent selection per receiver without extra wiring.

Is this answer helpful?

A

The EXR 156 supports remote feed via the horizontal low input and offers a maximum total remote feed current (specified in the datasheet). Other inputs are DC-blocked to ensure compatibility with upstream power systems.

Is this answer helpful?

A

Install indoors in dry locations, provide earthing with a Cu conductor ≥ 4 mm², maintain at least 5 cm clearance for ventilation, follow EN 60728-11 and EN 62368-1, and use 75 Ω F-connectors. Avoid mounting on ceilings and prevent water exposure to the power supply.

Is this answer helpful?

A

The multiswitch includes an integrated amplifier and frequency-dependent pre-emphasis to compensate for cable attenuation, improving output levels and maintaining signal quality across longer coax runs.

Is this answer helpful?

A

Use 75 Ω F-type connectors conforming to EN 61169-24. Ensure the inner conductor diameter is between 0.6–1.2 mm, burr-free, and do not exceed specified torque limits to avoid damaging device sockets.

Is this answer helpful?

A

Yes. The device complies with Directive 2014/53/EU and electronic equipment disposal should follow EU directive 2012/19/EU by returning units to designated collection points at end of life.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Integrated amplifier and pre-emphasis maintain signal levels for longer coax runs.
  • Independent horizontal/vertical and low/high switching per receiver via coax control.
  • High output isolation reduces inter-port interference and cross-talk.
  • Low power consumption with short-circuit-proof switch-mode power supply.
  • Terrestrial reception available even when satellite receiver is turned off.
VS

Disadvantages

  • Indoor-only unit limits outdoor or rooftop installations.
  • Max remote feed available only via horizontal low input; other inputs are DC-blocked.
  • Requires proper earthing (Cu ≥ 4 mm²) and adherence to installation standards.
  • Connector damage possible with inner conductor >1.2 mm or burrs; careful cable prep needed.
  • Limited to 6 outputs in EXR 156 variant (larger models needed for more subscribers).
M: OA-GPT-5-NAN

Product Specification

Satellite Inputs

4

Terrestrial Inputs

1

Outputs

6

Satellite Positions

1

Dimensions

8.46x1.69x5.83in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Kathrein EXR 156 — Reliable Multiswitch for Satellite and Terrestrial Distribution

The Kathrein EXR 156 is a compact, indoor multiswitch designed to distribute four satellite polarities/tones and terrestrial signals to multiple subscribers. Built for small to medium installations, it supports 6 output connections (other family models extend to 8, 12 or 16) and provides robust signal management for DVB-T/T2 and satellite IF in the 950–2150 MHz range while passing terrestrial signals from 47–862 MHz.

Featuring integrated amplification and pre-emphasis, the EXR 156 reduces cable attenuation and helps maintain consistent signal levels across longer coax runs. Each receiver can independently select horizontal/vertical and low/high bands via standard coaxial control (14/18 V and 0/22 kHz), which simplifies installation and avoids extra control wiring. The device also permits terrestrial reception even when the satellite receiver is switched off, improving household flexibility.

A high degree of output isolation minimizes cross-talk between subscriber ports, and the unit supports remote feeding through the horizontal low input (other inputs are DC blocked to enable compatibility with upstream power systems). The switch is energy-efficient thanks to a short-circuit-proof switch-mode power supply and consumes minimal current per subscriber. F-connectors and clearly specified electrical limits make it straightforward to integrate with common SAT/terrestrial setups.

Installation guidance emphasizes dry, indoor mounting, proper earthing (Cu conductor ≥ 4 mm²), adherence to EN 60728-11 and EN 62368-1 safety standards, and the use of 75 Ω F-connectors. The datasheet warns against oversized inner conductors and burrs that can damage connectors and specifies torque and conductor diameter limits for reliable connections. Thermal considerations require free air circulation and a minimum clearance around the unit.

The EXR 156 is compliant with EU radio-equipment directives and includes information for proper disposal of electronic equipment per EU regulations. Overall, the Kathrein EXR 156 is a dependable choice when you need a compact, feature-rich multiswitch for multi-subscriber satellite and terrestrial signal distribution.

Notes

  • Supports independent band/polarity selection per receiver via coax control (14/18 V and 0/22 kHz).
  • Integrated amplifier and pre-emphasis counteract cable loss for improved signal quality.
  • Remote feed available via horizontal low input; other inputs are DC-blocked.
  • Indoor use only; follow earthing and safety standards.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly