Kathrein EXD 1524 Manual
PDF manual · 20 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kathrein EXD 1524 manual using AI
Get instant AI answers from your Kathrein EXD 1524 manual
Ask anything about the Kathrein EXD 1524. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EXD 1524?
Yes No
Lea Schneider
11 months ago
Is the device actually compact, and does it still deliver good performance and build quality?
Manual.ly
10 months ago
Yes. Customers describe it as very compact, with a strong focus on portability and space saving. They also report high build quality and reliable functionality, meaning it performs as expected without feeling flimsy or underpowered. If you tell us your typical use case (desk, travel, everyday tasks), we can help confirm it fits your needs and recommend the right setup.
Frequently Asked Questions
The EXD 1524 supports up to 24 user bands (2×12) when configured appropriately; installers can select 8 or 12 user bands per output via the rotary switch to match EXR (8 UB) or EXE (12 UB) frequency plans.
Is this answer helpful?
Yes. Receivers must support the EN 50607 (SCD2) single‑cable standard to access user bands above UB 8. Receivers using the older EN 50494 SCR standard can use UBs 1–8 only.
Is this answer helpful?
Kathrein Power‑Saving monitors receiver activity and can switch off LNB power when no receivers are active, reducing consumption. It is optional and selectable with the rotary switch; when off the LNB is permanently powered.
Is this answer helpful?
Use the NCF 18 switched‑mode power supply (approved for EMC) for LNB feeding. Depending on the installation you may need splitters like EBC 110/EBC 114, DC‑decoupled resistors (EMK 05) for unused inputs, ESU series outlets and the EMU/BN accessories for cascade protection.
Is this answer helpful?
Yes. Two EXD 1524 units linked via a splitter (EBC 110) can receive additional satellites: in wideband mode up to four satellite positions; in universal mode two positions.
Is this answer helpful?
Install indoors only, ensure equipotential bonding (Cu ≥ 4 mm²), use F‑type 75 Ω connectors, maintain 5 cm clearance for the NCF 18, terminate unused RF ports with 75 Ω resistors, and adhere to EN 60728‑11 and EN 60065 standards.
Is this answer helpful?
Check for receiver voltage and single‑cable mode, verify correct rotary switch and UB/frequency assignments, ensure no UB duplication, confirm NCF 18 is connected and no short circuits exist, and update receivers if SCD2 support is required.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports up to 24 user bands and cascades up to eight multiswitches for large systems.
- dCSS with Full‑Band Capture and Wideband support enables up to four satellite positions with wideband LNBs.
- Kathrein Power‑Saving minimizes energy use and can switch off LNB power when receivers are inactive.
- Selectable 8 or 12 user‑band modes ensure compatibility with legacy EXR and newer EXE frequency plans.
- Integrated AGC, LED diagnostics and QR code links simplify installation and troubleshooting.
Disadvantages
- Full feature set (UB>8, 4‑sat multifeed) requires receivers supporting EN 50607 (SCD2).
- Configuration changes must be made with outputs unpowered, adding installer steps.
- Some setups require additional components (NCF 18, EBC 110, EMK resistors, ESU outlets).
- Indoor‑only IP30 enclosure limits outdoor or exposed mounting options.
- Incorrect user band assignment or duplicate UB use can cause mutual interference between receivers.
Product Specification
Satellite Inputs
4
Terrestrial Inputs
1
Outputs
2 (Unicable II)
Unicable
max. 24 participants total
Satellite Positions
1
Dimensions
4.05x5.83x1.73in (WxHxD)
Weight
1.12 lb
Product Description
Kathrein EXD 1524 — Flexible dCSS Single‑Cable Multiswitch
The Kathrein EXD 1524 is a configurable single‑cable multiswitch designed for modern SAT IF installations. Built on third‑generation dCSS (Digital Channel Stacking Switch) technology with Full‑Band Capture and Wideband support, it delivers a compact, energy‑efficient solution for apartments, multi‑dwelling units and small commercial installations. The unit supports up to 24 user bands when paired with a suitable power supply and can be cascaded with additional multiswitches to expand a system to multiple satellites and many subscribers.
Compact but feature‑rich, the EXD 1524 offers selectable operation modes via a rotary switch, letting installers choose between 8 or 12 user bands per output to match older Kathrein EXR and newer EXE frequency plans. Wideband LNB support lets the device handle broader frequency ranges (300–2350 MHz), enabling reception of up to two satellite positions with a single unit and up to four positions when two units are combined and linked with a splitter (EBC 110). The multiswitch outputs include AGC to maintain stable Sat‑IF output levels, and a PIN‑code option protects assigned user bands from unauthorized access, making cross‑apartment installations practical.
Energy efficiency is a core design point: the EXD 1524 works with the external NCF 18 switched‑mode power supply and integrates Kathrein Power‑Saving. When enabled, the system detects inactive receivers and can switch off LNB power to reduce consumption. Installation aids include front LEDs for troubleshooting, QR codes linking to configuration examples and manuals, and clear guidance for safe indoor mounting and cabling. The device uses standard F‑connectors and requires proper termination of unused inputs; it also supports the EN 50494 (SCR) and EN 50607 (SCD2) single‑cable protocols for broad receiver compatibility.
In practice, the EXD 1524 excels where flexible frequency mapping, installer control, and power management are needed. It is well suited for systems that mix legacy and modern receivers, multi‑tuner devices, and installations that may later expand via cascaded multiswitches and splitters. Clear safety, grounding and mounting guidelines ensure reliable operation across the rated –20 to +55 °C ambient range.
Notes
- Use the NCF 18 power supply for EMC compliance and reliable LNB feeding.
- For UB > 8 or multi‑satellite wideband setups, ensure receivers support EN 50607 (SCD2).
- Terminate unused inputs with DC‑decoupled resistors (e.g., EMK 05).
- Avoid splitters with diodes; use EBC 110 / EBC 114 and ESU series outlets for proper diode protection.
- Change rotary switch positions only with outputs unpowered to apply new settings.
Search for 67,706 Manuals online
Type-in Brand or Model
maria_k
10 months ago
Is the device truly compact, and does it still feel high-quality and perform reliably?
Manual.ly
10 months ago
Yes. Many customers note that the device is very compact without sacrificing build quality. It is designed to be easy to place and handle, while still delivering consistent functionality in everyday use. If you are concerned about fit or performance, please check the product dimensions and key specs on the listing before ordering, and feel free to contact support so we can help confirm compatibility for your setup.