Kathrein EBX 2920 Manual
PDF manual · 13 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Kathrein EBX 2920 manual using AI
Get instant AI answers from your Kathrein EBX 2920 manual
Ask anything about the Kathrein EBX 2920. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EBX 2920?
Yes NoFrequently Asked Questions
The EBX 2920 is a two‑way Sat‑IF splitter designed to distribute a single trunk line into two EXR 29xx multiswitch cascades. It houses nine dual splitters (8 Sat‑IF + 1 terrestrial) for dense indoor satellite distribution systems.
Is this answer helpful?
The EBX 2920 supports Sat‑IF frequencies up to 950–2150 MHz and terrestrial ranges from 5–862 MHz. Connections are via 75 Ω F‑connectors in accordance with EN 61169‑24.
Is this answer helpful?
Yes. The unit is remote‑feed capable on the trunk path and supports up to 1000 mA remote feed per satellite level. Certain outputs use diode decoupling and blocking capacitors to manage remote feeding and isolation.
Is this answer helpful?
Install indoors only, avoid flammable surfaces, and provide equipotential bonding with a copper conductor of at least 4 mm². Follow EN 60728‑11 and EN 60065 standards, use F‑connectors, and terminate unused outputs with 75 Ω resistors.
Is this answer helpful?
Yes. The EBX 2920 is designed to be cascaded with other EBX 2920 or EAX 2912 units, enabling scalable signal distribution in very large Sat‑IF installations.
Is this answer helpful?
The unit measures 112 × 228 × 54.5 mm and is intended for indoor mounting. Use wood screws up to 4 mm diameter and avoid over‑tightening F‑connectors (max clamping torque 3 Nm).
Is this answer helpful?
Electronic equipment must not be disposed of as household waste. Dispose of the EBX 2920 at appropriate public collection points in line with WEEE/2002/96/EC regulations for electrical and electronic equipment.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Low through‑loss on trunk path for efficient signal distribution.
- High shielding (up to >85 dB in key bands) reduces interference.
- Remote feed capable with up to 1000 mA per satellite level.
- Compact multi‑split housing holds nine dual outputs for dense installs.
- Cascadable with EAX 2912/EBX 2920 for scalable large systems.
Disadvantages
- Indoor only — not suitable for outdoor or exposed installations.
- Requires proper equipotential bonding (Cu ≥4 mm²) during installation.
- Frequency‑dependent attenuation may necessitate level adjustments.
- F‑connector sockets can be damaged by oversized or burry inner conductors.
- Unused ports must be terminated with 75 Ω resistors to avoid reflections.
Product Specification
Type
Splitter
Inputs
9
Outputs
9
Satellite Gain
5-2150MHz
Terrestrial Gain
5-2150MHz
FM Gain
5-2150MHz
Attenuation
0-4dB
Dimensions
8.98x2.15x4.41in
Weight
1.32 lb
Product Description
Kathrein EBX 2920 — Robust Sat‑IF Splitter for Large Installations
The Kathrein EBX 2920 is a professional two‑way Sat‑IF splitter designed for large satellite distribution systems. Built to work with EXR 29xx multiswitch cascades, the EBX 2920 distributes a single trunk line into two multiswitch cascades while preserving signal integrity across wide frequency ranges. Its compact indoor housing contains nine dual splitters (eight Sat‑IF inputs plus one terrestrial input), enabling dense, space‑efficient installations in headends, apartment buildings, hotels, or commercial sites.
Engineered for demanding setups, the EBX 2920 supports Sat‑IF frequency ranges up to 2150 MHz and offers excellent shielding and isolation characteristics. It is remote‑feed capable on the trunk path and provides diode decoupling and blocking capacitors on selected outputs to manage remote power and prevent interference between cascaded stages. F‑connector terminations and robust mechanical dimensions (112 × 228 × 54.5 mm) make it easy to mount and integrate into existing racks or distribution cabinets.
Performance highlights include low through‑loss on the trunk path, frequency‑dependent tap/split losses optimized for IF bands, and high decoupling values to protect parallel paths. The device accepts up to 1000 mA remote feed per satellite level, ensuring compatibility with common LNB powering schemes. With a high screening factor across multiple MHz bands, the EBX 2920 minimizes ingress/egress interference for reliable signal delivery.
Installation and safety are straightforward: indoor use only, bonding with a minimum 4 mm2 Cu potential equalization conductor, use of 75 Ω F‑connectors, and termination of unused ports with 75 Ω resistors. The unit is intended solely for satellite reception distribution; misuse voids warranties. Proper disposal following WEEE directives is recommended at end of life.
Whether deployed as a primary splitter in medium to large Sat‑IF systems or cascaded with EAX 2912 units for extended networks, the EBX 2920 is a practical choice for integrators requiring predictable performance, compact form factor, and remote‑feed flexibility.
Notes
- Indoor installation only; avoid mounting on flammable surfaces.
- Provide equipotential bonding (Cu, ≥4 mm²) per safety standards EN 60728‑11 and EN 60065.
- Use HF 75 Ω F‑connectors and terminate unused outputs with 75 Ω resistors.
- Max inner conductor diameter 1.2 mm; clamping torque max 3 Nm to avoid damage.
Search for 67,706 Manuals online
Type-in Brand or Model