Manual.ly Logo

Jura E8 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: claude-opus-5-5
page

/ 36

Loading...
c7d52b47634524017072611288901087bd6e page 15
 Maintenance

 Maintenance
Basic information about maintenance:
U
Press the f button to enter the Cockpit. This area consists of a
‘Maintenance status’ c section and a ‘Machine setting’ f
section. You can manage the maintenance of your E in the c
section.
U
If a maintenance programme needs to be initiated, the f
symbol appears with a red background. Press the f button to
enter the Cockpit. The Cockpit shows maintenance pro-
grammes that need to be carried out in the form of messages
with red backgrounds. Press the button that corresponds to the
message to go straight to the maintenance programme.
Maintenance programmes that are due imminently are
indicated on your E by means of a bar display within the
message.
U
Carry out each maintenance programme when you are
prompted to do so.
You can start coffee system rinsing manually at any time.
Precondition:The start screen is displayed.
T
Place a receptacle under the coffee spout.
T
 Press the f button.
T
 Press the c button.
T
 Press the ‘Rinse the coffee system’ button to start the rinse
operation.
The operation stops automatically.
After each milk preparation, the E prompts you to perform a milk
system rinse.
In the machine settings, you can set whether the milk system rinsing
is to be initiated manually or automatically  minutes after prepa-
ration (see chapter  ‘Machine settings’).
Precondition:The start screen is displayed..
Rinsing the machine
Rinsing the milk system
E8
E8

Chat with your Jura E8 manual using AI

Get instant AI answers from your Jura E8 manual

Ask anything about the Jura E8. Answers come from this manual, with the pages they are based on.

E8 Maintenance Schedule

Remind me when maintenance is due
Daily
Change the water in the tank

Remove the water tank, rinse it with cold water, and fill it with fresh, cold water daily to ensure hygiene.

Show in the manual (page 18)
Daily
Empty drip tray and grounds container

Empty the drip tray and coffee grounds container and rinse them with warm water. Reset counter by emptying while machine is on.

Show in the manual (page 18)
Daily
Clean the fine foam frother

Clean the fine foam frother daily after milk preparation. Dismantle and rinse if heavily soiled or if foam quality decreases.

Show in the manual (page 19)
Daily
Rinse the milk pipe

Rinse the milk pipe under running water after each use to maintain hygiene and prevent blockages.

Show in the manual (page 19)
Daily
Wipe the machine surface

Wipe the surface of the machine with a clean, soft, damp cloth (e.g., microfibre) to keep it free from dust and stains.

Show in the manual (page 19)
Every 3 months
Change the milk pipe

Replace the milk pipe approximately every 3 months to ensure optimal performance and hygiene.

Show in the manual (page 19)
Every 3 months
Change interchangeable milk spout

Replace the interchangeable milk spout approximately every 3 months.

Show in the manual (page 19)
As needed
Clean cup grille

Clean the top and bottom of the cup grille as needed to remove coffee residue and drips.

Show in the manual (page 19)
After each milk prep
Rinse the milk system

The machine prompts for a milk system rinse after each milk preparation. This can also be set to occur automatically 15 minutes later.

Show in the manual (page 21)
When prompted
Clean the milk system

Perform a deep clean using JURA milk system cleaner when prompted or regularly to remove fat and protein residues from the frother.

Show in the manual (page 22)
Usage-based
Clean the machine

Run the cleaning program with a JURA cleaning tablet after 310 preparations or 180 switch-on rinses, as indicated by the display.

Show in the manual (page 24)
When prompted
Descale the machine

Descaling is required when the machine displays 'Descale'. Frequency depends on water hardness. Not needed if using CLARIS Smart filter.

Show in the manual (page 25)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend E8?

Yes No

Frequently Asked Questions

A

Use the supplied Aquadur test strips. Hold one under flowing water for one second, shake off excess, wait one minute, and read the discoloration against the packaging guide to set the correct hardness level.

Is this answer helpful?

A

Yes, use the filler funnel for ground coffee. Do not add more than two level measuring spoons. Ensure the coffee is not ground too finely to avoid blockages, and prepare the drink within one minute of filling.

Is this answer helpful?

A

You should rinse the milk pipe daily after preparing milk. A thorough cleaning of the entire milk system using JURA cleaner is required if the frother is heavily soiled or when prompted by the machine.

Is this answer helpful?

A

Insufficient foam usually indicates the fine foam frother is dirty. Clean the frother thoroughly, dismantle it to rinse individual parts, and ensure the connector is free of milk residues or limescale fragments.

Is this answer helpful?

A

If you use the CLARIS Smart filter cartridge, the machine generally does not prompt for descaling because the filter reduces limescale. However, you may still need to descale the water tank periodically if limescale forms there.

Is this answer helpful?

A

Access the Cockpit, select Empty System, and place a receptacle under the hot-water nozzle. The machine will discharge steam until the system is empty, protecting it from frost damage during shipping.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intuitive JURA Cockpit interface for easy navigation and control
  • HP1 milk system produces high-quality, creamy fine foam automatically
  • Speciality Selection feature allows for complex drinks like Extra Shot
  • CLARIS Smart filter reduces limescale and extends machine life
  • Fully automatic cleaning and descaling programs simplify maintenance
VS

Disadvantages

  • Requires regular use of specific JURA branded cleaning products
  • Milk pipe must be replaced approximately every three months
  • Water hardness must be manually determined and set initially
  • Machine requires space around ventilation slots to prevent overheating
  • Grinder adjustment must only be done while the grinder is running
M: QW-35-FL

Product Specification

Power

1450W

Pump Pressure

217.5psi

Coffee System

Coffee Beans, Ground Coffee

Milk System

Separate Milk Container Optional, Height-Adjustable Milk Spout (max. 6.02in)

Grinder

Adjustable Grinder

Coffee Amount

Adjustable (10 Levels)

Water Amount

Adjustable

Coffee Temperature

Adjustable (3 Levels)

Hot Water Temperature

Adjustable (3 Levels)

Water Tank Capacity

0.5gal

Bean Hopper Capacity

9.87oz

Coffee Grounds Container Capacity

16 Servings

Display

Yes

Smart Home

App Control Optional

Dimensions

11.02x13.82x17.56in (WxHxD)

Weight

21.16lbs

M: QW-35-FL

Product Description

Experience Premium Coffee with the Jura E8

The Jura E8 represents the pinnacle of home coffee brewing technology, designed to deliver barista-quality beverages at the touch of a button. This fully automatic machine features a sophisticated intelligent pre-brew aroma system and an integrated grinder that ensures every cup is brewed with precision. Whether you crave a classic espresso, a rich latte macchiato, or a unique Caffè Barista, the E8 handles it all with ease. The machine utilizes the JURA Cockpit interface, allowing users to easily navigate settings, adjust product parameters, and monitor maintenance status.

Setting up your Jura E8 is straightforward. Users simply need to fill the bean container with roasted, untreated coffee beans and connect the water tank. For optimal performance, determining water hardness using the provided test strips is recommended before the first use. The machine includes a CLARIS Smart filter cartridge to ensure clean water, which protects the internal components from limescale buildup. Once powered on, the intuitive display guides you through language selection and initial rinsing cycles.

The versatility of the Jura E8 shines during daily operation. You can prepare specialty coffees with milk by connecting the HP1 milk system directly to a milk container. The fine foam frother creates creamy, feather-light milk foam perfect for cappuccinos and flat whites. Adjustments to coffee strength, temperature, and volume are made instantly via the multi-function buttons or the detailed product settings menu. Daily maintenance is simplified with automated prompts for rinsing the coffee system and cleaning the milk pipes, ensuring hygiene and consistent taste.

For long-term reliability, the E8 offers comprehensive maintenance programs. When prompted, users can initiate a cleaning cycle using original JURA tablets or perform descaling procedures to remove mineral deposits. The machine also provides clear troubleshooting messages on the display for common issues like empty water tanks or full drip trays. With its sleek design and robust build, the Jura E8 stands as a reliable companion for coffee enthusiasts who demand excellence in every sip.

M: claude-opus-5-5

© Copyright 2026 Manual.ly