Manual.ly Logo

JBL Aquaristic ProFlora CO2 Professional Set V Manual

0.0 · 0 Ratings

PDF manual · 81 Pages

English

M: QW-35-FL
page

/ 81

Loading...
15f8f911382ca079d571de64804b840e5516 page d
• Check to make sure the pH level is maintained, so that the CO₂ level in the CO₂ permanent test is also correct.
• JBL PROFLORA CO₂ ADVANCED SET: With these systems, the pH control unit takes over the automatic maintenance of the desired pH value.
9. Note on the pressure displayed on the pressure regulator
In the CO₂ pressurised gas cylinders, the CO₂ gas is under high pressure. This pressure depends on the ambient temperature. At room temperature
(approx. 20 °C), the left pressure gauge of the pressure regulator shows a pressure of about 50 bar. This increases as the room temperature rises.
Thus at 30 °C, the pressure gauge shows about 70 bar. The pressure in the CO₂ pressurised gas cylinder is not a measure of how full the cylinder is.
It will remain constant at the temperature-related value until shortly before the cylinder is empty. How much CO₂ is in a CO₂ pressurised gas cylinder
can only be determined by weighing it. The empty weight (tare) is stamped on the cylinder. The current weight minus the tare gives the available
amount of CO₂.
The pressure in the CO₂ pressurised gas cylinder is regulated down to an easy-to-handle so-called „working pressure“ by the pressure regulator. The
right-hand pressure gauge of the pressure regulator shows this working pressure. It is preset to approx. 2 bar in the JBL PROFLORA CO₂ REGULA
-
TOR BASIC
pressure regulators. When changing the working pressure, it is important that a decrease in CO₂ takes place, i.e. the adjustment screw
must not be closed, otherwise the new working pressure cannot regulate itself.
10. Changing cylinders
If the cylinder pressure on the left-hand pressure gauge falls below 30 bar, the refillable CO₂ pressurised gas cylinder needs to be refilled within
the next 2 - 3 days. The disposable CO₂ pressurised gas cylinder may only be changed when it no longer contains CO₂. This is when both pressure
gauges show 0 bar or no more CO₂ bubbles rise in the aquarium.
Disposable CO₂ pressurised gas cylinder:
Make sure that the disposable CO₂ pressurised gas cylinder is completely empty. There should be no CO₂ bubbles rising in the reactor or diuser.
Disconnect the CO₂ hose from the pressure regulator fitting and turn the pressure regulator counterclockwise o the Cylinder. Dispose of the empty
cylinder according to your local regulations. Connect a new cylinder as described in chap. 11.1.
Refillable CO₂ pressurised gas cylinder:
Close the cylinder valve and disconnect the CO₂ hose from the pressure regulator. Open the adjusting screw and release any pressure still present in
the pressure regulator until both pressure gauges indicate 0 bar. Loosen the connecting nut of the pressure regulator from the cylinder valve. Hand
over the reusable CO₂ pressurised gas cylinder for refilling.
If there is no filled reusable CO₂ pressurised gas cylinder available, you can also connect a disposable cylinder. Use the enclosed Allen key (size 6) to
remove the cylinder connection nut from the pressure regulator. The thread that comes free will fit the disposable CO₂ cylinder.
Connect the filled reusable CO₂ pressurised gas cylinder or the disposable CO₂ pressurised gas cylinder as described in chap. 11.1.
11. Technical data
Pressure regulator JBL PROFLORA CO₂ REGULATOR PROFESSIONAL:
Version V with pre-assembled thread adapter JBL PROFLORA CO₂ ADAPT U - M
Cylinder connection thread W21.8 x 1/14“ to M10x1
Version U without pre-assembled thread adapter JBL PROFLORA CO₂ ADAPT U - M
Cylinder connection thread: M10 x 1
Pressure gauge cylinder pressure: 0 – 160 bar
Pressure gauge working pressure: 0 – 4 bar
Adjusting screw for working pressure
Precision needle valve
Connection thread for hose screw connection: 1/8“
Hose screw connection for hose 4/6 mm
Pressure regulator JBL PROFLORA CO₂ REGULATOR BASIC:
Version V with pre-assembled thread adapter JBL PROFLORA CO₂ ADAPT U - M
Cylinder connection thread W21.8 x 1/14“ to M10x1
Version U without pre-assembled thread adapter JBL PROFLORA CO₂ ADAPT U - M
Cylinder connection thread: M10 x 1
Preset working pressure: approx. 2 bar
Precision needle valve
Connection thread for hose screw connection: 1/8“
Hose screw connection for hose 4/6 mm
Solenoid valve JBL PROFLORA CO₂ VALVE
Voltage: 12 V DC
Power consumption: 2 W
Hose screw connection outlet: for hose 4/6 mm
Inlet thread: 1/8“
Closed when currentless (NC)
Power supply unit:
Primary: 100 – 240 V AC, 47 – 60 Hz, 0.25 A
Secondary: 12 V DC, 0.3 A, 3.6 W
pH control JBL PROFLORA CO₂ CONTROL:
See separate operating instructions.
Disposal:
Components of your JBL PROFLORA CO₂ system which are marked with the adjacent symbol must not be disposed of with the normal household
waste. Please follow your local disposal regulations for electrical appliances.
UKUK
24 25

Chat with your JBL Aquaristic ProFlora CO2 Professional Set V manual using AI

Get instant AI answers from your JBL Aquaristic ProFlora CO2 Professional Set V manual

Ask anything about the JBL Aquaristic ProFlora CO2 Professional Set V. Answers come from this manual, with the pages they are based on.

ProFlora CO2 Professional Set V Maintenance Schedule

Daily
Check pH level and CO2 concentration

Monitor the permanent CO2 test to ensure the correct pH value is maintained. Adjust bubble count if necessary.

Show in the manual (page 13)
As needed (when pressure < 30 bar)
Refill or replace CO2 cylinder

For reusable cylinders, refill when left gauge drops below 30 bar. For disposable cylinders, replace only when completely empty (0 bar/no bubbles).

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ProFlora CO2 Professional Set V?

Yes No

Frequently Asked Questions

A

Yes, the Professional Set V ships without a pH sensor. You must purchase a new JBL PROFLORA CO2 pH Sensor Set separately to enable the automatic control features.

Is this answer helpful?

A

Absolutely. The system supports both System M (refillable) and System U (disposable) cylinders using an included adapter or by changing the thread connection.

Is this answer helpful?

A

The controller continuously measures pH and temperature. If the pH rises above the set point, it opens the solenoid valve to inject CO2 until the target level is reached.

Is this answer helpful?

A

With the standard reactor, it covers up to 400 liters. Adding the extension module increases the capacity to support aquariums up to 600 liters effectively.

Is this answer helpful?

A

No, the bubble counter includes an integrated check valve specifically designed to prevent water from flowing back into the regulator or cylinder.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Fully automated pH and CO2 control reduces manual labor
  • Dual manometers provide precise monitoring of gas pressure
  • Modular reactor system scales easily for larger aquariums
  • Integrated backflow protection safeguards expensive components
  • Compatible with both disposable and refillable cylinder types
VS

Disadvantages

  • Requires purchasing a separate pH sensor kit for initial use
  • Higher price point compared to basic CO2 sets
  • Touch display may require calibration for optimal accuracy
  • Solenoid valve adds complexity to the installation process
  • System relies on electricity which could fail during power outages
M: QW-35-FL

Product Specification

Range

CO2 supply, plant fertilization

Type

1x CO2 pressure regulator (connection for disposable bottles M10x1.25 and reusable bottles, mechanically regulated, 1x working pressure gauge, 1x bottle pressure gauge, 1x needle valve, 1x 4/6mm hose connector, 1x solenoid valve/night shutdown), 1x pH meter (controls solenoid valve based on pH measurement), 1x bubble counter, 1x CO2 diffuser (plastic), 1x temperature probe

Suitability

Freshwater, aquatics, 40-600 liters

Consumables

Disposable CO2 pressure bottle, Reusable CO2 pressure bottle, Calibration fluid, pH electrode with BNC connector

Features

Includes CO2 hose, without CO2 bottle

M: QW-35-FL

Product Description

Elevate Your Aquarium with the JBL PRO FLORA CO2 Professional Set V

Creating a thriving underwater ecosystem requires precision, and the JBL PRO FLORA CO2 Professional Set V delivers exactly that. This advanced system is designed for aquarists who demand the highest level of control over their aquatic environment. By combining high-precision pressure regulation with intelligent pH management, this set ensures your plants receive the perfect amount of carbon dioxide without risking the health of your fish.

The core of this system is the Professional Precision Pressure Regulator. Unlike basic models, this regulator features dual manometers to display both cylinder pressure and working pressure simultaneously. It supports both single-use and reusable CO2 cylinders, offering flexibility for different user preferences. The set includes a state-of-the-art pH controller with a touch display that automates the entire process. It measures water temperature and pH levels in real-time, adjusting the CO2 supply via a solenoid valve to maintain optimal conditions 24/7.

Installation is straightforward thanks to the modular design. The system comes with the TAIFUN SPIRAL reactor, which allows for customizable diffusion rates suitable for aquariums ranging from 40 to 600 liters. A bubble counter with an integrated backflow safety mechanism protects your equipment from water damage, ensuring long-term reliability. Whether you are growing fast-growing stem plants or delicate mosses, this professional set provides the stability needed for vibrant growth and active algae prevention.

M: QW-35-FL

© Copyright 2026 Manual.ly