Inverto Unicable II Manual
PDF manual · 12 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Inverto Unicable II manual using AI
Get instant AI answers from your Inverto Unicable II manual
Ask anything about the Inverto Unicable II. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Unicable II?
Yes NoVideo Manual
Inverto Installation guide and application video
Frequently Asked Questions
It distributes satellite and terrestrial TV or radio signals in a home or multi-room installation. Its SCR output can serve up to 32 compatible receiver tuners over a shared coaxial distribution line.
Is this answer helpful?
The default dynamic Unicable II configuration supports up to 32 receiver tuners. Each tuner must be assigned its own User Band frequency to operate independently.
Is this answer helpful?
The multiswitch supports the CENELEC EN50494 and EN50607 control protocols. Connected satellite receivers must support one or both of these Unicable standards when using the SCR output.
Is this answer helpful?
Yes. The Legacy output is intended for one conventional receiver without Unicable support. It operates as a universal output by default, although it can be reconfigured as a Unicable II output.
Is this answer helpful?
The unit uses four satellite IF inputs designed for a Quattro LNB. Connect the LNB feeds to the matching V/L, V/H, H/L, and H/H inputs. A terrestrial antenna can be connected separately.
Is this answer helpful?
A compatible receiver may power the multiswitch if it can provide enough current for both the switch and Quattro LNB. If not, use the supplied AC/DC adapter with a power inserter on the Unicable II output.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports up to 32 independent Unicable II receiver tuners through one SCR output.
- Combines satellite and terrestrial signals for streamlined home distribution.
- Includes a Legacy output for a non-Unicable receiver and can reconfigure it as Unicable II.
- Cascadable design includes four satellite and one terrestrial loop-through outputs.
- Works with EN50494 and EN50607 receiver control standards.
Disadvantages
- Receiver tuners on the SCR line must support EN50494 and/or EN50607.
- Advanced output configuration requires the separately sold Inverto Programmer.
- Correct User Band assignment and compatible pass-through outlets are required.
- External power may be needed if the receiver cannot supply sufficient current.
- Unused connections require 75-ohm galvanically isolated terminators.
Product Specification
Satellite Inputs
4
Terrestrial Inputs
1
Outputs
1 (Legacy), 4 (Sat Loop), 1 (Terrestrial Loop), 1 (Unicable II)
Unicable
max. 32 total participants
Cascadable
Yes
Satellite Positions
1
Dimensions
4.47 x 0.82 x 4.35 in (W x H x D)
Product Description
Inverto Unicable II - Read, Download & Print Free
The Inverto Unicable II programmable multiswitch is designed for efficient satellite and terrestrial signal distribution in modern homes and multi-room installations. Built around digital channel stacking technology, it lets a single SCR output serve up to 32 compatible receiver tuners, reducing the amount of coaxial cabling needed while supporting flexible viewing across multiple rooms.
High-capacity satellite distribution
This model, IDLU-UST110-CUO1O-32P, accepts four satellite IF feeds from a Quattro LNB and includes a terrestrial antenna input for combined TV and radio distribution. Its satellite operating range spans 950 to 2150 MHz, while terrestrial signals are supported from 47 to 862 MHz. Four loop-through satellite outputs and one terrestrial loop-through output make the unit suitable for cascaded systems where signal feeds continue to additional equipment.
The SCR output provides 32 User Bands in its standard dynamic configuration. Receivers using EN50494 or EN50607 can be assigned separate communication frequencies, allowing independent channel selection without signal conflicts. Default User Band frequencies extend from 984 MHz to 2148 MHz, offering broad compatibility with current Unicable II-capable tuners.
Flexible output options
Alongside the main Unicable II output, the multiswitch includes one Legacy output. This conventional universal connection supports a receiver that does not offer Unicable compatibility. The Legacy port can also be configured as a Unicable II output, giving installers another option when adapting the system to changing requirements.
Configuration can be updated with the separately available Inverto Programmer. This enables adjustments to the output behavior, including dynamic or static Unicable operation. The switch can be powered by a compatible receiver when adequate current is available for both the switch and Quattro LNB. Otherwise, a power inserter and supplied AC/DC adapter provide reliable external power.
Installation and operating guidance
For dependable results, install the unit on a wall or another non-flammable surface in a dry, shaded location. Use high-quality coaxial cable with at least 90 dB shielding, and ensure any pass-through outlets support satellite signals, bidirectional communication, and Unicable technology. Unused outputs should be terminated with galvanically isolated 75-ohm terminators.
When allocating User Bands, higher frequencies are recommended for outlets nearest the multiswitch, while lower frequencies are better suited to the longest cable runs. If fewer than 32 tuners are connected, starting with the lowest available frequencies can simplify planning and future expansion.
Notes
- The unit supports a maximum current draw of 500 mA at 13 V DC.
- Operating temperature is rated from -20 C to +60 C.
- Installation, repairs, and fault checks should be handled by qualified personnel.
Search for 67,706 Manuals online
Type-in Brand or Model