Manual.ly Logo

Icy Dock ToughArmor MB411SPO-1B Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-5-NAN
page

/ 1

Loading...
7b788075c517df2de0ad6b0fe0285dc9e2d3 page 1
Copyright
©
ICY DOCK International. All Rights Reserved. 650239 VER 1.0
2.5" SATA Mobile Rack for Slim ODD or Ultra Slim ODD Bay
ToughArmor
MB411SPO-1B
(Slim ODD)
MB411SPO-2B
(Ultra Slim ODD)
MB411SKO-1B
(Slim ODD + LOCK)
3.由于不同厂牌和规格硬盘的存取信号设计也会有所不同,部分硬盘可能不支持产品的指示灯显示
方式,如果指示灯显示不正常,但可以正常读写,则不影响运行,如果硬盘无法正常读写,请联系
我们。
4.若欲完全使用Hot-swap的功能,则主机也需要支持Hot-swap功能。
5.如欲知更多产品资讯,欢迎上网浏览本公司网站:http://www.icydock.com。
1.本公司保留产品升级与变更之权利,如改版,恕不另行通知。
2.本公司仅负责ICY DOCK产品本身相关的维修。任何跟其它软件、硬件、数据相关的故障请联络
其相关公司协助维修。
5.如欲知更多產品資訊,歡迎上網瀏覽本公司網站:http://www.icydock.com。
3.由於不同廠牌和規格硬碟的存取信號設計也會有所不同,部分硬碟可能不支援產品的指示燈顯示方
式。如果指示燈顯示不正常,但可以正常存取,則不影響操作,如果硬碟無法正常存取,請聯繫
我們。
4.若欲完全使用Hot-swap的功能,則主機也需要支持Hot-swap功能。
2.本公司僅負責ICY DOCK產品本身相關的維修。任何跟其它軟體、硬體、資料相關的故障請聯絡
其相關公司協助維修。
1.本公司保留產品升級與變更之權利,如改版,恕不另行通知。
4. フルでHot-Swap機能を使用する場合、Host側もHot-Swap機能に対応する必要があります。
5. ICY DOCK製品に関するお問い合わせは弊社のホームページhttp://www.icydock.comへアクセスしてください。
3. HDD出力信号仕様はメーカーにより異なります。場合によって一部分HDDが本製品のLEDランプに対応
できない場合があります。もしデータの読み書きが問題なければ操作に影響がありません。LEDランプ
点灯しない上読み書きできない場合、問い合わせください。
2. 当公司はただICY DOCK製品自身と関連している修理だけ責任を負います。いかなるとの他のソフ卜
ウェア、データと関連している故障はその関連している会社と連絡し、修理を協力して下さい。
1. 当公司は
4. Pour profiter pleinement la fonction Hot-Swap, vérifiez que votre configuration accepte
également la fonction Hot-Swap.
3. A cause des différentes spécifications des signaux d'activité, certains disques durs ne
supportent pas l'accès. Si la LED témoin ne s’allume pas, alors le disque dur n’est pas
pris en charge, contactez-nous pour un dépannage.
5. Si vous souhaitez obtenir plus d’informations sur nos produits, vennez visiter notre site:
http://www.icydock.fr
4. Para utilizar la función de intercambio en caliente, el dispositivo principal también debe admitir esta
f unción. Para comprobar sea el dispositivo principal admite la función de intercambio en caliente,
consulte las especificaciones y el manual del usuario de la placa base o de la tarjeta controladora.
5. Si tiene alguna pregunta o duda acerca de los productos ICY DOCK, visite nos en el sitio web
http://www.icydock.com
3. Debido a las diferentes especificaciones de las unidades para la señal de actividad a dichas
unidades, algunas de estas puede que no admitan el LED de acceso. Si el LED no funciona pero
el usuario puede realizar operaciones de lectura y escritura en la unidad, dicho LED se encuentra
dentro de esta categoría. Si el LED no funciona y no se pueden realizar operaciones de lectura o
escritura en la unidad, póngase en contacto con nosotros para solucionar el problema.
1. ICY DOCK se reserva el derecho de cambiar las especificaciones técnicas no relacionadas y
está sujeto a cambio sin previo aviso.
2. ICY DOCK no asumirá ninguna responsabilidad por ningún software, hardware o dato almacenado
en los productos ICY DOCK, o que interactúe con estos, que provoque daños o averías. ICY DOCK
solamente asumirá la responsabilidad de reparaciones y tareas de servicio de productos ICY DOCK.
NOTA
注釋
4. To utilize the hot swap function, the host must also support hot swap. To check if your host
supports hot swap, please refer to the documentation of the motherboard or controller card’s
specification.
5.
3. Due to different drive specifications for the device activity signal, some drives may not support
the access LED. If the LED does not function, but the user can read and write to the drive, it
may falls under this category. If the LED does not function, and the drive cannot be read or
written to, please contact us for troubleshooting.
2
1.
5.
4. Um Hot Swap zu nutzen muss diese Funktion von dem Host unterstützt werden. Konsultieren
Sie hierfür bitte die Bedienungsanleitung Ihres Mainboards oder Ihrer Controller-Karte.
3. Auf Grund unterschiedlicher Spezifikationen kann es vorkommen, dass manche Laufwerke das
Aktivitätssignal nicht unterstützen. Dieser Fall trifft zu, wenn Sie Lese- und Schreibzugriff
auf das Laufwerk haben, die LED aber kein Zugriffssignal anzeigt. Sollten Sie keinen Lese- und
Schreibzugriff auf das Laufwerk haben und die LED auch nicht funktionieren, so kontaktieren
Sie uns bitte zur zur Fehlerbehebung.
1. ICY DOCK
2. I
2. ICY DOCK ne pourra être tenu responsable de la perte ou dégradation de tout logiciels,
matériels ou données suite à des dommages ou des disfonctionnements de matériels
utilisés avec nos produits ICY DOCK. La responsabilité de ICY DOCK ne pourra être
engagées que pour ces propres produits.
1. ICY DOCK
3.2-8
3.2-7
WARNING: Please use the included screws to secure the drive(s).
User manual
2 x M3*4 flat head screw
for 2.5" HDD/SSD
(2 x Screw for spare parts)
Front View
Contenu
包裝說明
包装说明
Contenido
del paquete
Package Contents
Packungsinhalt
1
2
機體說明 机体说明
Información del dispositivo
本体説明
Device Information Geräteinformationen
Informations dispositif
6 x M2*4 flat head screw
for device
(2 x Screw for spare parts)
1 x device
2 x keys
(MB411SKO-1B only)
Drive tray
ejection button
MB411SPO-1B (Slim ODD) - Fits 2.5" drive up to 9.5mm height
MB411SKO-1B (Slim ODD) - Fits 2.5" drive up to 9.5mm height
MB411SPO-2B (Ultra Slim ODD) - Fits 2.5" drive up to 7mm height
LED indicator
(Power: Solid green light ; HDD access: Blinking green light)
LED indicator
(Power: Solid green light ; HDD access: Blinking green light)
EZ-Lock
(MB411SKO-B only)
MB411SKO-1B / MB411SPO-1B (Slim ODD)
MB411SPO-2B (Ultra Slim ODD)
3
操作步骤
操作步驟製品の組み込み手順について
Installation Guide Installationsanleitung Guide d'Installation Guía
de instalación
Rear View
3.1 MB411SKO-1B / MB411SPO-1B (Slim ODD)
Remove the plastic bar and keep the M3*4
flat head screws as spare drive screws.
6 Pin Power 7 Pin SATA
3.1-3 3.1-4
3.1-23.1-1
3.1-5 3.1-6
HDD/SSD
Flip to the bottom side of the tray along with
the drive and use the included M3*4 screws
to secure the drive onto the tray.
This tray accommodates 2.5" drives with
up to 9.5mm height. When placing the
HDD or SSD onto the tray, be sure that the
drive s connector is located at the rear of
the tray.
Please use the included M3*4 flat head
screws to install the drive.
3.2 MB411SPO-2B (Ultra Slim ODD)
This tray accommodates 2.5" drives
with up to 7mm height.
3.2-5
HDD/SSD
3.2-6
HDD/SSD
Remove the plastic bar and keep the M3*4
flat head screws as spare drive screws.
3.2-3 3.2-4
3.2-23.2-1
3.1-83.1-7
3.1-9
Please use the included keys to
unlock / lock by changing the lock
direction. (MB411SKO-1B only)
Unlocked Locked

Chat with your Icy Dock ToughArmor MB411SPO-1B manual using AI

Get instant AI answers from your Icy Dock ToughArmor MB411SPO-1B manual

Ask anything about the Icy Dock ToughArmor MB411SPO-1B. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ToughArmor MB411SPO-1B?

Yes No

Frequently Asked Questions

A

The MB411SPO-1B fits 2.5" HDDs or SSDs up to 9.5mm in height. For ultra-slim 7mm drives, consider the MB411SPO-2B variant.

Is this answer helpful?

A

Yes, the enclosure supports hot-swap, but the host system (motherboard or controller card) must also support hot-swap for proper operation. Check your host documentation to confirm support.

Is this answer helpful?

A

Different drives use different activity signal specifications; some drives may not trigger the access LED even while functioning normally. If read/write works, operation is unaffected. If the drive cannot be accessed and the LED is off, contact support.

Is this answer helpful?

A

The package includes M3*4 flat-head screws for securing 2.5" drives, additional M2*4 screws for device mounting, spare screws, and in SKO models, two keys for the lock mechanism.

Is this answer helpful?

A

No. The keyed lock (EZ-Lock) is available on the MB411SKO-1B model. The MB411SPO-1B is the standard model without an integrated lock.

Is this answer helpful?

A

First verify the drive is secured properly and connectors are aligned. Test read/write functionality on another host if possible. If the drive remains unreadable, contact ICY DOCK support for troubleshooting and possible repair; ICY DOCK handles repairs for its products only.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact design fits slim ODD bays and supports 2.5" drives up to 9.5mm.
  • Hot-swap capable when paired with a host that supports hot-swap.
  • Clear LED indicators for power and drive activity (dependent on drive signal).
  • Includes spare screws, keys (for SKO model), and an easy-drive ejection mechanism.
  • Durable tray and secure mounting using included M3 screws.
VS

Disadvantages

  • Some drives’ activity signals may not trigger the access LED.
  • Hot-swap requires host support; not a standalone guarantee.
  • Limited to 2.5" drives and specific height variants (9.5mm or 7mm).
  • No responsibility for software, data, or third-party hardware issues from manufacturer.
  • Locking feature is only available on the SKO variant, not the standard SPO model.
M: OA-GPT-5-NAN

Product Specification

Type

Mobile Rack

Internal connectors

1x 2.5" SATA 6Gb/s

External connectors

1x SATA 6Gb/s

Hot-Swap

Yes

Drive bay

1x 5.25" SlimLine (up to 0.50 in)

Drive height

0.37 in

Enclosure cooling

N/A

Power supply

1x 6-Pin Slim SATA

Lock

Yes

Features

All-metal construction

Manufacturer warranty

five years

M: OA-GPT-54-NAN

Product Description

Icy Dock ToughArmor MB411SPO-1B Manual Overview

The Icy Dock ToughArmor MB411SPO-1B is a rugged 2.5" SATA mobile rack designed for slim optical drive bays, providing a secure, hot-swappable solution for installing 2.5" HDDs or SSDs in systems with limited front-bay space. Engineered for durability and ease of use, the unit supports drives up to 9.5mm in height and offers clear LED indicators for power and drive activity. Its compact form factor is ideal for workstations, servers, and compact desktops that need quick drive access without removing the chassis.

Key Features and Design

Built with a sturdy tray and a keyed locking option available in the SKO variant, the ToughArmor MB411SPO-1B emphasizes both protection and convenience. The drive tray secures the drive using included M3 screws and positions the SATA connector toward the rear for straightforward insertion. The product includes spare screws, a drive-ejection button, and an easy-to-read front LED (solid green for power, blinking green for activity) to monitor drive status at a glance.

This model prioritizes compatibility and practical installation. While the MB411SPO-1B fits standard 2.5" drives up to 9.5mm, the MB411SPO-2B variant supports ultra-slim 7mm drives. The enclosure supports hot-swap functionality when paired with a host system that also supports hot-swap, enabling uninterrupted drive changes and maintenance.

Installation and Usage

Installation involves removing a plastic bar, placing the drive onto the tray with the connector toward the rear, and securing it with the included M3*4 flat-head screws. The unit connects to the host via a standard 7-pin SATA data and 6-pin power interface. For locked models, use the included keys to toggle lock direction and secure drives against unauthorized removal.

LED behavior is dependent on the drive’s activity signal; some drives may not trigger the access LED even while functioning normally. If a drive cannot be accessed and the LED does not indicate activity, contact support for troubleshooting. Always verify that the host motherboard or controller supports hot-swap if you intend to use that feature.

Practical Considerations

The ToughArmor MB411SPO-1B is well suited for users seeking a compact, durable, and serviceable drive bay solution. It’s especially useful in environments where drives are frequently swapped, such as data recovery, testing labs, or modular storage setups. ICY DOCK provides product support and reserves the right to update specifications without notice.

Notes:

  • Use only the included screws to secure drives.
  • Confirm host hot-swap support to use hot-swap functionality fully.
  • LED inactivity does not always indicate drive failure; test read/write before assuming fault.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly