Manual.ly Logo

Hymer 4051 Manual

0.0 · 0 Ratings

PDF manual · 60 Pages

English

M: OA-GPT-5-NAN
page

/ 60

Loading...
dc8390d6bbfd7b6c4366d239260836d0cf24 page a
10
2023-110095802SRG
EN
Intended use
10
Technical information
10
Scope of delivery
10
Instructions for assembly
10
Safety instructions
11
Service and maintenance
13
Transport and storage
13
Packaging and disposal
13
Service life
13
Table of contents
Intended use
This product is a portable working appliance that can be used in a variety of dierent situations. With the product, minor works at height
can be carried out where a use of other working appliance is not appropriate. It may only be used in accordance with the instructions for
use. Furthermore ensure that the product is suitable for the respective intended use. Any other use shall be considered improper. There is
no liability for damage resulting from improper use. Prior to commercial use of the product at work, a risk assessment should be carried
out which takes into account the legal provisions of the respective country. In addition, products for commercial use must undergo regular
inspections in accordance with provisions pertaining to operational safety and equipment.
Technical information
These instructions for use were designed for various products of the same design. The technical data that is critical to this product
mayvaryinterms of the type and size and is specied on the product’s label.
Scope of delivery
Instructions for assembly
This product is normally delivered completely pre-assembled and can be used immediately. If the product is delivered in unassembled state,
instructions for assembly are included. Always observe the supplied instructions for use when attaching or using optional accessories.
A
B
A
H
H
B
A
F
F
F
I
F
F
J
L
K
G
G
C
E
E
D
D
K
B
K
A = Stile
B = Rung/Step
C = Ladder foot
D = Cross-beam (for ladder length of 3 m upwards)
E = Cross-beam shoes
F = Fitting
G = Locking hook (with/without anti-lift device)
H = Self-locking hook (for rope-operated ladders)
I = Rope (for rope-operated ladders)
J = Wall ro
llers (optional)
K = Product label
L = Instructions for use

Chat with your Hymer 4051 manual using AI

Get instant AI answers from your Hymer 4051 manual

Ask anything about the Hymer 4051. Answers come from this manual, with the pages they are based on.

4051 Maintenance Schedule

After every use
Clean product if heavily soiled

Clean the product immediately after use if it is visibly dirty with dust, dirt, paint, oil, fat or snow. Do not use aggressive or abrasive cleaning agents.

Show in the manual (page 13)
Regularly
Lubricate hinges

If present, lubricate hinges regularly to ensure proper functioning of moving parts.

Show in the manual (page 13)
Regularly
Inspect for damage

Check stiles, fixings, rungs, fittings, feet and locking mechanisms for bends, corrosion, looseness or damage. Do not use if any item is defective.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 4051?

Yes No

Frequently Asked Questions

A

The Hymer 4051 Sliding Ladder 2x 14 Steps is a portable extension ladder intended for minor to medium-height tasks where larger equipment is disproportionate. It’s suitable for both private and professional use when used according to the manual and local safety rules.

Is this answer helpful?

A

Place the ladder at a safe angle (recommended 65–75°) and extend the ladder at least 1 meter above the landing point. Fit any required cross-beams or stabilizers, secure locking devices, ensure steps are horizontal, and position the ladder on firm, clean ground before use.

Is this answer helpful?

A

Perform a visual inspection for deformed or corroded stiles, missing or damaged rungs, loose or missing fasteners, damaged fittings or hinges, functioning locking mechanisms, intact feet or caps, and cleanliness. Lubricate joints as needed and do not use the ladder if any critical defect is found.

Is this answer helpful?

A

Avoid using conductive ladders where electrical risks exist. For unavoidable live electrical work, use a non-conductive ladder variant. Always identify overhead lines or exposed electrical equipment in the work area and follow electrical safety protocols.

Is this answer helpful?

A

The ladder is intended for a single user unless otherwise indicated on the product. Always observe the maximum total load printed on the ladder sticker; exceeding the rated load or user count is unsafe and not permitted.

Is this answer helpful?

A

The Hymer 4051 is typically delivered fully preassembled and ready for use. If supplied unassembled, assembly instructions are included. Optional accessories include wall rollers, cross-beam shoes, and other fittings—always follow the accessory manual when installing them.

Is this answer helpful?

A

Secure the ladder properly during transport (roof racks or inside vehicles). Store it clean and dry, protected from weather and direct sunlight for plastic components; keep wooden parts dry. Fix loose parts (e.g., ropes) before transport and store where it won’t cause trip hazards or be misused by unauthorized persons.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual sliding sections with 14 steps each provide extended reach while remaining compact for transport.
  • Preassembled delivery option allows immediate use; optional accessories (wall rollers, cross-beams) increase versatility.
  • Clear product labeling and manual guidance ensure correct selection of type/size and safe operation.
  • Robust construction with fittings and locking hooks (anti-lift options) enhances stability and user safety.
  • Comprehensive maintenance guidance helps prolong service life and preserves warranty when followed.
VS

Disadvantages

  • Single-user limit and specified maximum load restricts multi-person or heavy-equipment tasks.
  • Not suitable for use on uneven, loose, or contaminated ground without additional measures.
  • Requires adherence to regular inspections and competent-person maintenance for commercial use.
  • Certain models require non-conductive alternatives for electrical-risk environments, adding cost.
  • Top three rungs are not usable as standing platform, limiting maximum practical working height.
M: OA-GPT-5-NAN

Product Specification

Type

Extension ladder

Material

Steel, Aluminum

Rungs

2x 14

Working height

max. 303.54 in

Platform height

none

Load capacity

max. 330.69 lb

Special features

Non-slip feet, Rope pull

Weight

41.02 lb

M: OA-GPT-54-NAN

Product Description

Hymer 4051 Sliding Ladder 2x 14 Steps Manual

The Hymer 4051 Sliding Ladder 2x 14 Steps is a robust, portable extension ladder designed for safe, versatile use in both professional and private settings. Built with two sliding sections and 14 steps per section, this ladder offers practical reach for light to medium–duty tasks at height. The design emphasizes stability and ease of transport — it is commonly delivered preassembled and ready for immediate use, with optional accessories available for specific applications.

Constructed from durable materials and finished to resist everyday wear, the Hymer 4051 features clear labeling for important technical data on the product sticker. Key structural parts include stiles, rungs, ladder feet, cross-beams for longer lengths, fittings, locking hooks with optional anti-lift protection, and rope/hoist components for rope-operated models. Optional wall rollers and protective cross-beam shoes expand installation flexibility.

Installation and use are straightforward: position the ladder at the proper inclination (recommended 65–75°), extend it at least 1 meter above the landing point when accessing a higher level, and fit any required cross-beams before use. The manual emphasizes following the assembly and safety instructions exactly, using suitable footwear, and ensuring the ladder is placed on firm, clean ground — not on contaminated or uneven surfaces.

Safety considerations are central to the Hymer 4051’s guidance. The ladder is suitable for one user at a time; observe the maximum load rating printed on the product. Never stand on the top three rungs, avoid lateral overreaching or side loads (for example, heavy side drilling), and never move or reposition the ladder while standing on it. Use non-conductive variants for unavoidable work near live electrical equipment. In professional settings, perform a local risk assessment and follow statutory inspection requirements.

Maintenance instructions highlight regular visual checks and servicing by a competent person. Inspect stiles, rungs, fittings, hinges, locking mechanisms, and end caps for deformation, corrosion, wear, or missing fasteners. Lubricate joints as needed and clean off paint, oil, or grime after heavy soiling. Repairs or modifications must follow manufacturer guidelines to avoid voiding warranty.

For transport and storage, secure the ladder properly (e.g., on roof racks or inside vehicles), store it in a clean, dry place away from direct sunlight for plastic-containing models, and protect wooden parts from moisture. Fix any loose parts (like ropes on rope-operated ladders) before transit. Dispose of packaging and the product at end of service life in accordance with local regulations.

Notes:

  • Extend the ladder 1 m above the landing point when used for access to higher levels and secure if necessary.
  • Ensure the ladder angle is correct (65–75°) and steps are horizontal on step-type models.
  • Do not use the ladder in strong winds or bad weather; avoid contaminated surfaces.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly