Manual.ly Logo

Homepilot Smart Plug 1800W Manual

0

PDF manual · 1 Pages

English

page

/ 1

Download
Search
Loading...
1417-homepilot-smart-plug-1800w-manual page 1
DELTA DORE
RADEMACHER GMBH
Buschkamp 7
46414 Rhede (Germany)
Subject to technical modifications, misprints and errors excepted. Illustrations not binding
.
service.en@homepilot-
smarthome.com
UM D106-2
Item no.: 11301001
1. This manual ...
describes how to commission and operate the Smart plug. Please read
this manual through completely and follow all the safety instructions.
This manual is part of the product. Please store it in an easily accessible
place. When passing the Smart plug on to a third party, this manual
must be passed on as well.
1.1 Symbols used
Danger of fatal electric shock
Danger area / dangerous situation
i
Other useful
information
Improper use can lead to personal injury or property
damage.
Never use the DuoFern Radio System and its compo-
nents for the remote control of devices and systems
with increased safety-relevant requirements or where
there is an accident risk. Applications of this kind
require additional safety equipment.
Improper use can lead to serious property
damage.
Train all persons to use the Smart plug safely.
Never plug in several Smart plugs in a row.
Never allow children to play with the device.
2. Safety instructions
There is a risk of fatal electric shock when touching
live electrical components.
Never open the device.
Do not use the Smart plug should you discover damage
to the device.
Never use the Smart plug outside or in damp rooms.
Overloading of the Smart plug can lead to the de-
struction of the device or a fire (e.g. caused by a short
circuit or overheating).
Observe the specifications for the maximum permissible
switching capacity in “Technical specifications”.
Do not use the Smart plug to disconnect a plugged in
end unit.
Even when the Smart plug is switched off, the plugged
in end unit is not completely disconnected from the
mains power supply.
Switch off and disconnect the Smart plug before
undertaking all work on the electrical end unit.
3. Intended use
Only use the Smart plug for connecting and controlling electrical applianc-
es (e.g. lighting etc.) up to the maximum permissible switching capacity,
see “Technical specifications”.
Operating conditions
Use the Smart plug only in dry rooms.
Use the Smart plug only in 230 V / 50 Hz mains sockets with
earthed contacts.
4. Improper use
Using the Smart plug for any other purpose than previously mentioned
is not permissible.
5. Product description
The Smart plug can be used to integrate and control one electrical
appliance (e.g. lighting) within a DuoFern radio network. This enables
many of the functions provided by the DuoFern transmitter
(e.g. Premium gateway or DuoFern Manual Control) to be used.
5.1 Functions depending on the switching mode
The Smart plug has two switching modes (unit and light mode) that can
be used to control electrical appliances. You can switch between the two
switching modes using an appropriate DuoFern transmitter (e.g. Premium
gateway etc.). To do so, please read the operating manual for the respective
DuoFern transmitter.
Factory setting = unit mode
Switching commands from a
DuoFern transmitter
Reactions of the Smart
plug in:
Unit
mode
Light
mode
UP ON OFF
STOP OFF OFF
DOWN OFF ON
ON ON ON
OFF OFF OFF
Automatic dawn function* ON OFF
Automatic dusk function* OFF ON
Sun function* - OFF
6. Installation
i
The Smart plug shall be installed near the end unit and
shall be easily accessible”.
Insert the Smart plug into the mains sock-
et. The Smart plug is now ready for use.
Then plug in the desired
end unit.
Resetting to the factory setting
Press and hold the button for 15 seconds. The LED initially flashes
green, then red. Release the button when the LED starts to light up red
continuously. The Smart plug has now been returned to the default
setting on delivery.
8. Technical specifications
Supply voltage: 230 V AC, 50 Hz, 8 A max.
Max. switching capacity:
Ohmic load 1800 W, (e.g. light bulb)
Inductive load 200 W, (e.g. motor, fluorescent lamps)
Capacitive load 150 W(e.g. lamps with LEDs)
Standby consumption: < 0,5 W
Protection class: I
IP Protection class: IP20 (operating in dry rooms)
Operating temperature: 0 °C to 35 °C (T35)
Dimensions: ∅ 41 mm / depth = 73 mm
Radio Data
Transmission frequency: 434,5 MHz
Transmission power: max. 10 mW
Radio range: up to 20 m
DuoFern end units: max. 20 units
Specification according to EN 61058-1
Duty-type and relevant
ON/OFF-time: S1 (100 %)
Cooling: no forced cooling required
Protection device: int. overtemperature protection
Circuit disconnection: relay, 1-pole, Micro (µ)
Number of operating cycles: 10.000
Rated impulse voltage: 2.5 kV
Overvoltage category: II
Pollution degree (macro) / PTI: 2 / 175V
Glow wire test temperature: 650 / 850 °C
9. Simplified EU declaration of conformity
DELTA DORE RADEMACHER GmbH, hereby declares that the
Smart plug complies with the Directive 2014/53/EU (Radio
Equipment Directive). The full text of the EU declaration of
conformity is available on our website.
www.homepilot-smarthome.com
Warranty terms and conditions
Information on the warranty conditions is enclosed with the product.
i
Radio systems that transmit on the same frequency can
cause interference.
7. Operation
Operating button
incl. LEDs (green/red)
Switch the connected device on / off
Press the button briefly.
i
Control via radio is only possible after logging on to a
DuoFern transmitter.
Activate log-on mode
Press and hold the button for 2 to 5 seconds. Release the button as soon
as the LED flashes green.*
Activate log-off mode
Press and hold the button for 5 to 10 seconds. The LED initially flashes
green. Release the button as soon as it flashes red.*
* The log-on and log-off mode respectively remain active for
120 seconds.
The log-on and log-off process has been successful if the LED lights up
continuously. The respective process has failed if the red LED lights up
continuously.
EN
Smart plug
Instruction manual
* Please note that the automatic functions have no function in combina-
tion with the Premium gateway.

Advantages and Disadvantages

Advantages

  • Supports up to 1800W ohmic loads for versatile use
  • Two switching modes for lights and general devices
  • Low standby power under 0.5 W saves energy
  • Clear LED and button controls for easy setup
  • Integrated overtemperature protection enhances safety
VS

Disadvantages

  • Indoor use only with IP20 rating
  • Not a full mains isolation when switched off
  • Automatic sun functions not available via Premium gateway
  • Limited radio range up to 20 m indoors
  • Do not daisy-chain multiple smart plugs

Ask a Question

Manual.ly information here
0/1000

Do you recommend Smart Plug 1800W?

Frequently Asked Questions

A

Use with 230 V/50 Hz appliances within rated loads: up to 1800W ohmic (incandescent), 200W inductive (motors, fluorescents), and 150W capacitive (LED lamps). Avoid damp areas and high-safety applications.

Is this answer helpful?

A

Hold the plug’s button for 2–5 seconds until the LED flashes green. Complete pairing within 120 seconds using your DuoFern transmitter. A steady LED confirms success; steady red indicates failure.

Is this answer helpful?

A

Unit Mode is optimized for general devices, while Light Mode aligns with lighting behavior and supports automatic dawn/dusk functions via compatible DuoFern transmitters. Commands map differently in each mode.

Is this answer helpful?

A

No. When used with the Premium gateway, automatic dawn and dusk functions are not active. Manual control, schedules, and typical gateway features remain available.

Is this answer helpful?

A

No. The plug is IP20 and intended only for dry indoor rooms. Do not use it in damp environments or outdoors to avoid shock, damage, or fire risk.

Is this answer helpful?

A

No. Even when switched off, the device is not fully isolated from mains. Unplug the smart plug before servicing or handling the connected equipment.

Is this answer helpful?

A

Press and hold the button for 15 seconds. The LED flashes green, then red. Release when the LED lights red continuously to confirm a full factory reset.

Is this answer helpful?

Product Description

Product pic

Homepilot Smart Plug 1800W Manual: Your Quick Start Guide

Smarter Power Control for Everyday Devices

Compact control, clear safety, effortless setup

The Homepilot Smart Plug 1800W brings reliable, radio-controlled switching to your everyday appliances. Built for dry indoor spaces, it supports up to 1800W ohmic loads (like incandescent lamps), 200W inductive loads (motors, fluorescent lamps), and 150W capacitive loads (many LED lamps). With IP20 protection, Class I safety, and low standby consumption under 0.5 W, it’s designed for efficient, responsible use.

Pair it with the DuoFern ecosystem to unlock flexible control. Two switching modes—Unit Mode and Light Mode—let you tailor how the plug responds to commands such as UP, DOWN, ON, and OFF. Automatic dawn/dusk functions are supported in Light Mode via select DuoFern transmitters, while the Premium gateway focuses on manual and scheduled control without automatic sun functions. Up to 20 DuoFern end units can join your network, with an indoor radio range of up to 20 meters at 434.5 MHz.

Operation is simple: press the onboard button to toggle power, hold 2–5 seconds to enter log-on, 5–10 seconds to log-off, and 15 seconds to reset to factory defaults. Clear LED feedback (green for pairing, red for errors) keeps setup transparent. The compact form factor (∅ 41 mm, depth 73 mm) ensures nearby sockets remain usable, while the integrated relay and overtemperature protection add an extra layer of safety.

Safety takes priority. Use only in 230 V/50 Hz grounded outlets, never in damp locations, and do not daisy-chain multiple smart plugs. Even when switched off, connected devices aren’t fully isolated from mains—unplug before servicing. Train users, keep away from children, and stay within the specified load classes to prevent overheating or fire risk.

Whether you’re automating lamps or managing small appliances, the Homepilot Smart Plug 1800W Manual gives you a clear, practical path to smarter energy control with dependable performance and thoughtful safeguards.

Notes:

  • Automatic dawn/dusk features don’t operate via the Premium gateway.
  • Radio systems on the same frequency can cause interference.
  • For warranty and EU conformity, see Homepilot resources.\nNo reviews were provided to analyze. There are no positive or negative highlights available, and therefore no themes, strengths, or weaknesses can be summarized at this time.

Search for 1. Mio Manuals online

Search Subtract

Type-in Brand or Model

© Copyright 2024 Manual.ly