Hilleberg Nammatj 3 GT Manual
PDF manual · 16 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Hilleberg Nammatj 3 GT manual using AI
Get instant AI answers from your Hilleberg Nammatj 3 GT manual
Ask anything about the Hilleberg Nammatj 3 GT. Answers come from this manual, with the pages they are based on.
Nammatj 3 GT Maintenance Schedule
Avoid direct long-term sunlight; use a tarp over the tent when set up for days in strong sun to prevent fabric damage.
Hang the tent to dry after every use, preferably with poles in place to keep fabrics apart.
Brush off dirt and debris from the inner tent. Brush zippers with a stiff brush, especially in sandy or dusty conditions.
Check the entire tent for damage and make repairs if necessary before packing.
Clean the pegs and replace any that are damaged or lost.
Inspect poles for potential damage before storing them.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend Nammatj 3 GT?
Yes NoFrequently Asked Questions
The kit includes the Kerlon 1800 outer tent connected to an inner tent, three 10 mm poles (3 x 328 cm for the 3 GT), 22 pegs, eight attached guy lines with line runners, a spare pole segment, a pole repair sleeve, and stuff sacks for tent, poles and pegs.
Is this answer helpful?
Yes, the Nammatj GT can be pitched with only four pegs in a basic configuration, but Hilleberg recommends carrying and using all available peg points and guy lines for secure anchoring, particularly in variable or severe weather.
Is this answer helpful?
Assemble poles section by section—do not fling them open. Insert a pole halfway into its sleeve, then draw the sleeve on until the pole end seats fully. Ensure pole ends sit in the pole cups and tighten tensioners; avoid gaps to prevent breakage.
Is this answer helpful?
The outer tent is waterproof but not breathable, so using it without the inner tent increases condensation risk. You can use the outer alone for extra space, but add a footprint and ventilate to reduce moisture buildup.
Is this answer helpful?
Use the large hooded vents (vestibule and rear) with adjustable panels and mesh to balance airflow. Pegging out the rear corners of the inner tent increases the air gap between layers, improving ventilation and reducing condensation.
Is this answer helpful?
Dry the tent fully before long-term storage, ideally hung with poles in place. Brush zippers clean of sand and grit, inspect and clean pegs and poles, repair any damage, and avoid prolonged direct sunlight exposure to prevent fabric degradation.
Is this answer helpful?
Hilleberg offers a warranty against manufacturing and material defects; coverage varies by region. Damages from misuse, UV exposure, or normal wear are not covered. Repairs outside warranty are available at reasonable cost via dealers or Hilleberg.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Lightweight yet extremely durable Kerlon 1800 construction suitable for harsh backcountry use.
- Integrated inner tent with full no-see-um mesh and versatile ventilation system reduces condensation risk.
- Generous vestibules and tunnel layout offer ample gear storage and easy access.
- Comes with spare pole segment, pole repair sleeve, and dedicated stuff sacks for expedition readiness.
- Multiple peg points (22) and optional double-pole capability for enhanced anchoring and storm stability.
Disadvantages
- Outer tent fabric is waterproof but not breathable, increasing condensation when used without inner tent.
- Careful pole handling required; improper assembly can cause damage or breakage.
- Higher cost relative to lightweight recreational tents due to premium materials and features.
- Using all pegs and guy lines is recommended, adding setup time compared to simpler tents.
- Prolonged sun exposure can degrade fabric; requires extra protection in high-UV environments.
Product Specification
Type
Tunnel tent
Persons
3
External Dimensions (LxWxH)
159.45x62.99x41.34in
Internal Dimensions (LxWxH)
86.61x62.99x41.34in
Water column
216.54in
Weight
9.04lb
Product Description
Hilleberg Nammatj 3 GT Tunnel tent Manual
The Hilleberg Nammatj 3 GT is a high-end tunnel tent designed for lightweight but durable backcountry shelter. Built with Kerlon 1800 outer fabric and an integrated inner tent, the Nammatj 3 GT balances low weight with robust performance in harsh conditions. It uses three 10 mm poles (3 x 328 cm for the 3-person GT), 22 peg points, and eight pre-attached guy lines with tensioners to secure the structure. A spare pole segment, pole repair sleeve, and dedicated stuff sacks for tent, poles and pegs are included, making it expedition-ready straight from the pack.
Design and features
The tunnel design creates generous interior space and efficient vestibules for gear. The outer tent is fully waterproof though not breathable, so the integrated inner tent with full no-see-um mesh provides insect protection and ventilation control. Large hooded vents in the vestibule and rear wall combine a snow-proof, water-repellent panel with a fine mesh panel; both are adjustable from inside and out to manage airflow and condensation. The door system allows multiple opening options (top, bottom, or side) and includes a removable mesh panel that stows in a pocket.
Pitching, anchoring and use
The Nammatj GT can be erected with only four pegs in a basic pitch, but Hilleberg strongly recommends using all 22 peg points and guy lines for reliable performance in changing weather. Poles must be handled carefully—assemble section by section and seat ends fully to avoid damage. Pegs should be driven at about 45 degrees or flatter if required by substrate. The tent accommodates double poles for extra stability in extreme conditions. The linked inner and outer tents can be detached so the outer can be used alone as a roomy shelter (note: greater condensation risk when used without the inner tent).
Care and maintenance
Dry the tent thoroughly before long-term storage and, when possible, hang it with poles in place to separate inner and outer fabrics. Clean dust and sand from zippers with a small brush and inspect pegs and poles for damage. Avoid prolonged exposure to direct sunlight and consider a tarp in high-UV or desert conditions. Repairs outside warranty are available through Hilleberg or dealers.
Notes
- Included: Kerlon 1800 outer, integrated inner tent, 3 poles (3 x 328 cm), 22 pegs, 8 guy lines, spare pole seg., pole repair sleeve, instruction booklet.
- Use all peg points and guy lines whenever possible; basic pitching requires only four pegs but is not recommended for extended or exposed use.
- Outer tent-only setups increase condensation risk; use a footprint and ventilate to mitigate.
Search for 67,706 Manuals online
Type-in Brand or Model