Manual.ly Logo

Heco La Diva Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 52

Loading...
05fbf16267f16c3f6c1b11c12a7f39704e08 page 7
7
Dear HECO Customer,
We congratulate you on acquiring this exclusive HECO product.
Acquiring this loudspeaker will enable you to fulfil your wildest dreams for listening to natural,
unadulterated sound.
Please study the instructions and information below carefully before using your new loudspeakers.
SET-UP INFORMATION
LA DIVA should if possible be set up without obstruction and slightly inclined towards the place of
listening (fig. 1).
In the ideal configuration the speakers and the listening position should form an equilateral triangle.
When the left and right speakers are the same distance from the listening position their sound arrives at
the same time, resulting in a harmonious, natural music reproduction.
There should be a clear line of sight between the loudspeakers and the listening position. Any sound-
absorbing or reflecting obstacles in the path will distort the sound.
FITTING THE FLOOR PLATES
The floor plates provided must be fitted to both speakers before use. To do this, place the speakers on
a clean, stable base with the bottom facing upwards. It is better not to remove the protective bag until
after fitting has been completed so as to avoid damage to the paint surface.
First fit the four metal spikes to the floor plate, as shown in Fig. 2a: Four spikes (x) are screwed into the
threaded holes in the floor plate (y) from below as far as they will go. The lock screw (z) is then fitted
and tightened.
Now fit the pre-assembled floor plate using the M6 screws provided, as shown in Fig. 2b.
The metal spikes (x) are height-adjustable so as to guarantee the stability of the speaker. To do this,
loosen the top lock nut (z) and adjust the spike by turning it. Once the right setting has been found,
tighten the lock nut again.
Rubber inserts are screwed into the bottom of the cone spikes. These ensure optimum stability on
smooth, hard floor coverings, such as laminate or tiles. The rubber inserts can be replaced with metal
inserts (included in the package). This variation is better suited for carpets, for example.
BI-WIRING AND BI-AMPING, TRI-WIRING AND TRI-AMPING
LA DIVA possesses a field with eight screw terminals, which – besides conventional connection to an
amplifier – also permit bi-wiring/bi-amping and tri-wiring/tri-amping.
The (-) terminals are on the left.
The top terminals are connected to the treble branch, the middle ones to the crossover filter’s mid-range
branch and the bottom terminals to the bass branch. The additional terminal at the top right allows the
treble range to be elevated by 2dB, the other terminal in the centre right allows the mid-range to be
lowered by 2dB.

Chat with your Heco La Diva manual using AI

Get instant AI answers from your Heco La Diva manual

Ask anything about the Heco La Diva. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend La Diva?

Yes No

Frequently Asked Questions

A

The ideal configuration forms an equilateral triangle between the two speakers and your listening position. This setup ensures sound arrives at your ears at the same time for a natural and balanced soundstage. You should also maintain a clear line of sight between the speakers and yourself to prevent distortion from sound absorbing obstacles.

Is this answer helpful?

A

Yes, the connection panel features eight screw terminals that support Bi-wiring and Bi-amping. You must use specific cable bridges provided with the unit. For Bi-wiring, use one cable shoe and one bananaplug bridge. Do not use bridges for Tri-wiring and Tri-amping modes.

Is this answer helpful?

A

Clean the lacquered surfaces using a mild household cleaner. You should absolutely avoid using furniture polish or similar products on the finish. Using polish can damage the surface coating. Regular cleaning helps maintain appearance without risking harm to the materials.

Is this answer helpful?

A

Yes, the product includes a five-year warranty that begins with the purchase date. This warranty applies to the original owner and covers material or fabrication errors. You must submit the receipt of purchase and keep the product in original packaging if service is required.

Is this answer helpful?

A

Amplifiers with weak output can be more dangerous than powerful ones at medium volumes. They can overload faster than stronger amps and cause measurable distortion. This distortion is extremely harmful to the loudspeaker drivers. Watch for distortion and turn the volume down immediately if you hear it.

Is this answer helpful?

A

For cable lengths up to 3 meters, a cross-section of at least 2.5 square mm is recommended. For longer cables exceeding 3 meters, use at least 4 square mm to prevent sound quality loss. Always ensure both channel cables are the same length for proper phase alignment.

Is this answer helpful?

A

This can happen if the amplifier or other components generate inaudible high-frequency signals. Even cheap products can produce these dangerous oscillations. If tweeters fail unexpectedly, have a professional technician check your system components for these inaudible high signals.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Supports complex wiring like Bi-wiring and Tri-amping for signal purity
  • Adjustable tone controls allow customization based on room acoustics
  • 5-year warranty provided on original defects from manufacturing
  • High power handling capacity up to 550 watts for dynamic playback
  • Adjustable spikes ensure stability on various floor types like carpets or tiles
VS

Disadvantages

  • Heavy weight of 49.8 kg requires very sturdy placement support
  • Susceptible to damage from weak amplifiers causing distortion over time
  • Complex wiring process may be challenging for beginners without experience
  • Large physical dimensions require significant space in listening room
  • Sensitive to incorrect polarity installation which risks amplifier damage
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Floorstanding Speaker

Principle

3-Way

Tweeter

1x 0.98"

Midrange

1x 6.69"

Woofer

2x 7.87"

Frequency Range

17Hz-52.50kHz

Power Handling

300W RMS, 550W Peak

Impedance

4-8 Ohm

Sensitivity

93dB

Features

Bi-Wiring

Color

Black

Dimensions (WxHxD)

15.16x52.76x18.31in

Weight per unit

109.79lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Experience Pure Audio with the Heco La Diva

Acquiring the Heco La Diva marks a significant step for audiophiles seeking precision in natural, unadulterated sound. These loudspeakers represent a commitment to high fidelity and robust engineering. Users often consult specific instructions to ensure optimal setup without compromising the performance. The guidance emphasizes forming an equilateral triangle between the speakers and the listening position for the best acoustic signal alignment. This geometry ensures sound arrives simultaneously at the ears, creating a harmonious and balanced music reproduction experience.

Installation and Placement Details

Stability is absolutely key for such massive units. The box includes floor plates and adjustable metal spikes for foundation support. You must mount these components before operation to prevent damage and ensure the cabinet sits perfectly level. Rubber inserts work best for hard floors like laminate, while metal tips offer better grip for carpets. Clear line of sight between speaker and listener is vital for an undistorted soundstage. Avoid obstructions that absorb or reflect sound waves unexpectedly in the path.

Technical Flexibility and Connectivity

The connection panel offers eight screw terminals for advanced connectivity. This supports conventional linking as well as Bi-wiring and Tri-amping configurations. Tone controls allow for a +2dB treble boost or a -2dB mid-range cut. Such adjustments depend on room acoustics and personal preference. Heavily damped rooms benefit from high-frequency elevation, whereas wall-proximal setups might need mid-range reduction for accuracy. The three-way bass reflex design handles frequencies from 17 Hz up to 52 500 Hz effectively.

Power Handling and Physical Specs

Proper amplifier matching is crucial for longevity. The units handle up to 550 watts but are sensitive to distortion from weak amplifiers. Overdriving can destroy drivers quickly due to high energy input. The speaker weighs nearly 50 kg, requiring a sturdy stand or floor placement. Cleaning should involve a mild household cleaner only. Never use furniture polish on the lacquered finish as it may cause harm.

Important Notes for Users

Remember to check polarity strictly during connection. Black connects to black and red to red to maintain phase. Short circuits can damage your amplifier significantly. Ensure cable cross-sections match length requirements to prevent signal loss on long runs. If distortion is heard, lower volume immediately to protect the tweeters. Warranty coverage typically lasts five years on original parts provided the setup follows safety guidelines. When reviewing the Heco La Diva Manual for wiring diagrams, pay close attention to the Y-cable bridges for standard operation versus separate leads for bi-wiring. Cable length matters greatly for signal integrity, so matching lengths for both channels is mandatory. There is a critical warning regarding high-frequency oscillations from amplifiers that may not be audible but can still damage tweeters at low volumes. Always have the system checked by a technician if drivers fail unexpectedly. This ensures your expensive components remain operational for the long term.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly