Manual.ly Logo

Heco Aurora Sub 30A Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: gpt-5.6-terra
page

/ 52

Loading...
d4f79fe9e6ea13664f90b7e35da6bae8f01b page 8
8
Dear Customer,
Congratulations on your fine new loudspeakers and thank you very much for choosing HECO! You have made an
excellent choice. The high-quality speakers produced by HECO are renowned all over the world.
Please study the instructions and information below carefully before using your new loudspeakers.
The triangle with a lightning symbol warns the user that high voltage is used within the
device which can result in electric shock.
The triangle with an exclamation mark informs the user that important operating and
maintenance instructions (repair) are contained in the accompanying instruction manual,
which must be observed.
Do not open! Risk of electric shock!
CAUTION: In order to avoid electric shock do not open the speaker
housing/mains adapters or remove the covers. The user is not to
conduct any repairs him/herself. Repairs should only be conducted by
qualified technicians! Do not use any sockets or extension cables that
do not fully accommodate the plug of the device.
IMPORTANT SAFETY NOTICE
Please read through the instruction manual carefully before starting to use the device. This manual contains
important information concerning operation and safety aspects. It is imperative you observe all of the information.
Keep the manual in a safe location.
• WARNING NOTICES: All of the warning symbols on the device, accessories and in the instruction
manual itself must be adhered to.
• EXPOSURE TO HEAT: Only operate the device and accessories in a temperature range from 10°C
to 40°C.
• The device should not be positioned near heat sources (heaters, ovens, radiant heaters, naked
flames, etc.). When setting up close to an amplifier a minimum distance of 10 cm must be
maintained.
• No naked flame sources, such as lighted candles, should be placed on the device.
• Pay attention to a sufficient ventilation of the device. The device may not be covered, e.g. by
drapes, curtains. Maintain a distance of 20 cm to walls.
• EFFECT OF MOISTURE: The device should not be exposed to dripping or splash water. Neither
should it be used to support vases or other containers filled with liquid. Do not expose the device
to water or high levels of humidity. There is a danger of electric shock. In the event of contact with
moisture or liquids remove the mains adapter immediately.
• FOREIGN MATERIAL: Ensure that no foreign material enters through the device openings and into
the interior. This could trigger short circuits and even result in electric shock and fire.
• CLEANING: Please use a soft, dry cloth with no cleaning agents, sprays or chemical solvents, as
these could damage the surfaces.
• ELECTRICAL CONNECTION: Please note the voltage levels on the information signs. The mains
adapter for the device should only be operated with the voltage and frequency values specified on
the signs.
Aurora Sub 30A_Manual.indd 8 11/14/2017 9:21:10 AM

Chat with your Heco Aurora Sub 30A manual using AI

Get instant AI answers from your Heco Aurora Sub 30A manual

Ask anything about the Heco Aurora Sub 30A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Aurora Sub 30A?

Yes No

Frequently Asked Questions

A

It is a powered, front-firing bass-reflex subwoofer with an integrated amplifier and a 30 cm long-stroke driver. It is designed for low-frequency reinforcement in stereo and home cinema systems.

Is this answer helpful?

A

The subwoofer is rated at 125 watts RMS and 250 watts maximum. This power is intended to provide substantial bass support for music, television, games, and film soundtracks.

Is this answer helpful?

A

The stated frequency range is 22 to 150 Hz. Its adjustable crossover control covers 50 to 150 Hz, allowing the upper bass limit to be matched to the main speakers.

Is this answer helpful?

A

Place it near the front speakers, preferably in front of the listening position. Leave at least 30 cm from side walls or objects and 20 cm behind it so bass output is not restricted.

Is this answer helpful?

A

For bookshelf speakers, start around 100 to 150 Hz. For floorstanding speakers, start around 50 to 100 Hz. Fine-tune by listening for a smooth transition between the main speakers and subwoofer.

Is this answer helpful?

A

The phase switch offers 0 and 180 degree positions. Use the setting that produces fuller lower bass at the listening position. The 180 degree setting may help if placement or room acoustics cause bass cancellation.

Is this answer helpful?

A

In AUTO mode, the subwoofer enters standby with a red LED when no signal is present. It turns on automatically with a received signal, showing green, then returns to standby after several minutes without input.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 30 cm long-stroke driver and bass-reflex design support deep bass down to 22 Hz.
  • Built-in amplifier delivers 125 W RMS and up to 250 W maximum output.
  • Adjustable 50-150 Hz crossover helps match bookshelf or floorstanding speakers.
  • Auto standby mode saves energy and switches on when an audio signal is detected.
  • Phase, level, and crossover controls help optimize bass for different rooms and systems.
VS

Disadvantages

  • The 350 x 465 x 445 mm cabinet requires noticeable floor space.
  • It needs a mains connection because the amplifier is integrated.
  • No high-level speaker inputs are specified; connection is based on line-level outputs.
  • Correct placement and calibration are needed to avoid weakened or uneven bass.
  • The supplied accessory list includes only a mains cable.
M: gpt-5.6-terra

Product Specification

Woofer

1 x 12 in

Amplification

Active

Design

Front-firing

Enclosure Type

Bass reflex

Frequency Range

20 Hz-150 Hz

Power

125 W RMS

Dimensions (W x H x D)

13.78 x 18.31 x 16.34 in

Weight

42.99 lb

M: gpt-5.6-terra

Product Description

Heco Aurora Sub 30A - Read, Download & Print Free

The Heco Aurora Sub 30A is an active bass-reflex subwoofer designed to add convincing low-frequency depth to music, movies, and gaming systems. Built to complement Heco Aurora speakers while remaining compatible with other loudspeaker setups, it combines a 30 cm long-stroke driver with a built-in amplifier for powerful, controlled bass without requiring a separate external power amp.

Deep Bass for Home Entertainment

With an output rated at 125 watts RMS and 250 watts maximum, the Aurora Sub 30A is engineered to give soundtracks greater impact and music more weight. Its front-firing design projects bass toward the listening area, while the bass-reflex cabinet supports a frequency range of 22 to 150 Hz. This makes it suitable for reproducing low musical notes, cinematic effects, and the foundation of a full-range stereo system.

The subwoofer is especially well matched to the Aurora series in both appearance and sound character. However, its line-level inputs allow it to work with many stereo amplifiers and AV receivers. Whether it is used to strengthen compact bookshelf speakers or to extend the reach of floorstanding models, the adjustable controls help tailor output to the room and speaker combination.

Adjustable Controls for Better Integration

A rear-panel level control lets listeners balance bass volume with the main speakers. The adjustable crossover spans 50 to 150 Hz, giving flexibility for different setups. A higher crossover setting is recommended for smaller bookshelf speakers, while lower settings can suit floorstanding speakers with stronger bass output.

The phase switch provides 0 and 180 degree options. In most systems, 0 degrees is appropriate, but switching phase can improve fullness when the subwoofer is positioned far from the front speakers or when room acoustics create cancellation. The recommended automatic power mode places the unit in standby when no signal is detected and activates it when playback begins.

Placement and Everyday Care

For best results, position the Heco Aurora Sub 30A near the front speakers and ahead of the listening position. Leave at least 30 cm of clearance at the sides and 20 cm behind the cabinet to help preserve bass performance and ventilation. Its dimensions of 350 x 465 x 445 mm provide a substantial enclosure for deep output while remaining practical for many living rooms.

Notes

  • Connect equipment only while it is switched off.
  • Set an AV receiver's subwoofer level to 0 dB before fine-tuning the subwoofer level control.
  • Clean the cabinet with a soft, dry cloth and avoid sprays, solvents, and abrasive materials.
  • Keep the unit dry, ventilated, and away from direct heat sources.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly