Manual.ly Logo

Hansgrohe Logis Manual

5.0 · 1 Ratings

PDF manual · 48 Pages

English

M: QW-35-FL
page

/ 48

Loading...
0f1c8680369eb7169c06c3023117f9623b91 page 4
4
English
Assembly (see page 32)
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 34)
To adjust the hot water limiter. Using a hot water limiter
in combination with a continuous flow water heater is
not recommended.
Cleaning (see page 35)
Dimensions (see page 36)
Flow diagram (see page 37)
free flow
Shower outlet
Tub outlet
Spare parts (see page 39)
XXX = Colors
000 = Chrome Plated
090 = Chrome Plated/Gold Plated
130 = Polished Bronze
140 = Brushed Bronze
250 = Brushed Gold-Optic
330 = Polished Black Chrome
340 = Brushed Black Chrome
400 = White/Chrome Plated
670 = Matt Black
700 = Matt White
950 = Brushed Brass
990 = Gold Plated
Operation (see page 38)
Test certificate (see page 48)
Fault Cause Remedy
Mixer stiff - Cartridge defective, calcified - Exchange cartridge
Mixer dripping - Cartridge defective - Exchange cartridge
Diverter not operating - Residue - Clean converter / grease O-rings
- Water pressure to low - Increase water pressure
- Diverter defective - Exchange diverter
Hot water temperature too low, no
cold water. Instantaneous water
heater starts up when cold water is
selected.
- Hot water limiter incorrectly set - Set hot water limiter
- Crossflow - Exchange cartridge

Chat with your Hansgrohe Logis manual using AI

Get instant AI answers from your Hansgrohe Logis manual

Ask anything about the Hansgrohe Logis. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Logis?

Yes No
0
User Pic

Verna Donnelly

7 months ago

Is this faucet easy to install on an existing I-Box?

0
User Pic

Manual.ly

7 months ago

Yes, the installation is straightforward. The faucet is designed for simple integration with already installed I-Box systems, making the setup process uncomplicated and hassle-free.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Sara Mueller

6 months ago

How would you describe the build quality of this faucet?

M: QW-35-FL

Frequently Asked Questions

A

The mixer can operate at a maximum pressure of 1 MPa. However, the recommended operating pressure is between 0.1 and 0.5 MPa for best results.

Is this answer helpful?

A

It is not recommended to use a hot water limiter in combination with continuous flow water heaters, as it may cause operational issues.

Is this answer helpful?

A

Do not use silicone containing acetic acid. Clean regularly with mild soap and water to maintain the shine and prevent buildup.

Is this answer helpful?

A

A dripping mixer usually indicates a defective cartridge. Replacing the cartridge typically resolves the leakage issue immediately.

Is this answer helpful?

A

Yes, the Hansgrohe Logis mixer is exclusively designed for use with drinking water and meets all relevant hygiene standards.

Is this answer helpful?

A

If water pressure is too low, the diverter may not function correctly. You should increase the water pressure to ensure proper operation.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable chrome plating resists corrosion and fingerprints
  • Single lever design offers intuitive temperature and flow control
  • Certified safe for direct contact with drinking water
  • High-pressure tolerance up to 1 MPa ensures consistent performance
  • Easy maintenance with replaceable cartridges
VS

Disadvantages

  • Requires equal pressure balance between hot and cold supplies
  • Acidic silicone must be avoided to prevent surface damage
  • Cartridge replacement may be needed if calcification occurs
  • Not recommended for use with instantaneous water heaters without adjustment
  • Installation requires specific torque settings to avoid leaks
M: QW-35-FL

Product Specification

Material

Plastic, Metal

Color

Chrome

Mounting Type

Recessed, 1 Hole

Height

6.1 inches

Projection

4.76 inches

Spout

No

Diverter

No

Operation

Single-handle Mixer

Drain Control

No

Features

Without shower kit, Bath/Shower diverter

M: QW-35-FL

Product Description

Elevate Your Bathroom with the Hansgrohe Logis Single Lever Bath Mixer Chrome

The Hansgrohe Logis Single Lever Bath Mixer Chrome is a masterpiece of functional design, bringing modern elegance and reliable performance to your bathroom. This mixer is designed for those who appreciate clean lines and superior engineering. The chrome finish not only adds a touch of luxury but also ensures durability against daily wear and tear.

Designed exclusively for drinking water, this fixture adheres to strict safety standards. It features a single lever operation that allows for precise control over both water volume and temperature. The ergonomic handle makes it easy to adjust settings even with wet hands, ensuring a comfortable bathing experience every time.

Safety is paramount in its construction. During installation, protective gloves are recommended to prevent any injuries from sharp edges. The unit requires balanced pressure between hot and cold water supplies to function optimally. It is built to withstand operating pressures up to 1 MPa, with a recommended range of 0.1 to 0.5 MPa. The maximum hot water temperature it can handle is 70°C, though 65°C is recommended for daily use.

Maintenance is straightforward. Avoid using silicones containing acetic acid during cleaning or sealing, as these can damage the surface. If the mixer becomes stiff or starts dripping, replacing the cartridge usually resolves the issue. For optimal flow, ensure there are no obstructions in the pipes before installation.

This bath mixer is part of a broader collection, offering versatility in style while maintaining high quality. Whether you are renovating a master suite or updating a guest bath, the Hansgrohe Logis provides a blend of aesthetics and utility that stands the test of time.

M: QW-35-FL

© Copyright 2026 Manual.ly