Hansgrohe AXOR Metropol Manual
0.0 · 0 Ratings
PDF manual · 40 Pages
English
Loading...

Fault Cause Remedy
Insufficient water - Shower filter seal dirty - Clean filter seal between shower and hose
Mixer stiff - Cartridge defective, calcified - Exchange cartridge
Mixer dripping - Cartridge defective - Exchange cartridge
Spout temperature does not correspond with tempera-
ture set
- Hot and cold supplies are reversed - Install function block turned through 180° (see page
38)
Instantaneous heater didn’t work - Flow limiter in handshower isn’t removed - Remove flow limiter
- Shower filter seal dirty - Clean filter seal between shower and hose
4
English
Assembly (see page 33)
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The product may only be used for bathing, hygienic and body cleaning
purposes.
The arm of the shower head is intended only to hold the shower head. Do not
load it down with other objects!
Children as well as adults with physical, mental and/or sensoric impairments
must not use this product without proper supervision. Persons under the influence
of alcohol or drugs are prohibited from using this product.
Do not allow the streams of the shower touch sensitive body parts (such as your
eyes). An adequate distance must be kept between the shower and you.
The product may not be used as a holding handle. A separate handle must be
installed.
The hot and cold supplies must be of equal pressures.
Installation Instructions
• Prior to installation, inspect the product for transport damages. After it has been
installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the
applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• The mesh washer must be insert to protect the shower against incoming dirt by
pipework. Incoming dirt leads to defects or/and can damage parts of the
shower; such caused faults voids all liability and guarantee claims.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Centre distance: 150±12 mm
Connections G 1/2: cold right - hot left
Thermal disinfection: 70°C / 4 min
• Safety against backflow
• The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 34)
To adjust the hot water limiter. Using a hot water limiter in combination with a
continuous flow water heater is not recommended.
Maintenance (see page 37)
The check valves must be checked regularly according to EN 806-5 in accordance
with national or regional regulations (at least once a year).
Dimensions (see page 40)
Flow diagram (see page 40)
Spare parts (see page 35)
XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
340 = Brushed Black Chrome
670 = Matt Black
700 = Matt White
990 = Polished Gold-Optic
Special accessories (order as an extra)
extension 60 mm #93882000 (see page 35)
Cleaning (see page 36)
Hot and cold supplies are reversed (see page 38)
Operation (see page 34)
Test certificate (see page 35)
Quick check
I'm not a robot
Incorrect answer, please try again.
Chat with your Hansgrohe AXOR Metropol manual using AI
Get instant AI answers from your Hansgrohe AXOR Metropol manual
Ask anything about the Hansgrohe AXOR Metropol. Answers come from this manual, with the pages they are based on.
Ask a Question
0/1000
Do you recommend AXOR Metropol?
Yes NoProduct Specification
Material
Metal, Ceramic
Color
chrome
Mounting type
freestanding, 1 hole
Height
36.38 in
Projection
9.25 in
Pitch
no
Spout
rigid bath spout, hand shower
Operation
Single-lever mixer
Remote drain control
no
Special features
Diverter bath/shower, integrated shelf, shower holder
Product Description
Search for 67,706 Manuals online
Type-in Brand or Model