Manual.ly Logo

Hansa HansaMix Manual

0.0 · 0 Ratings

PDF manual · 37 Pages

English

M: QW-35-FL
page

/ 37

Loading...
67738cf3f6a99462ba330b67233cc836d1f3 page 2
2
Für den Installateur
For the Plumber
Pour l’installateur
Para el instalador
Zur Wahrung der Gewährleistungsrechte sind HANSA Produkte zwingend und ausschließlich durch einen sanitären Fachhandwerker zu
montieren. Bei Reklamationen bzw. unerwartet auftretenden Mängeln wenden Sie sich an Ihren Installateur.
To maintain warranty entitlements, HANSA Products must be fi tted exclusively by a specialist sanitary engineer.
In case of complaints or unexpected defects, contact your fi tter.
Afi n de préserver les droits de garantie, les produits HANSA doivent être montés exclusivement par un spécialiste sanitaire.
Veuillez vous adresser à votre installateur en cas de réclamations ou de défauts imprévus.
Para salvaguardar los derechos de garantía, los productos HANSA debe montarlos obligatoria y exclusivamente un artesano profesional en equipos
sanitarios. Consulte a su instalador en caso de reclamaciones o de presentarse defectos inesperados.
HANSA - Partner der www.handwerkermarke.de
Zur Einhaltung der Geräuschwerte nach DIN 4109 sind bei höheren Drücken als 6 bar Druckminderer in die Hauptleitung einzubauen.
Hohe Druckdifferenzen über ca. 1 bar zwischen Kalt- und Warmwasseranschluss sind zu vermeiden.
To comply with the noise emission fi gures required by DIN 4109, pressure reducers must be installed in the main pipe at higher pressures
than 6 bar. High pressure differences of more than approx. 1 bar between the cold and hot water connection should be avoided.
Afi n de respecter les valeurs de bruit prescrites par la norme DIN 4109, il convient de monter des réducteurs de pression dans la conduite
principale lorsque les pressions sont supérieures à 6 bar.
Les différences de pression importantes supérieures à environ 1 bar entre les raccords eau froide et eau chaude doivent être évitées.
Para el cumplimiento de los valores de ruido conforme a la norma DIN 4109 en caso de presiones superiores a 6 bares, debe montarse un
reductor de presión en el conducto principal.
Deben evitarse elevadas diferencias de presión, superiores a aprox. 1 bar, entre la conexión de agua fría y la conexión de agua caliente.
Schäden, die infolge unsachgemässer Behandlung, natürlicher Abnützung oder zu grosser Inanspruchnahme entstanden sind,
sind von unserer Gewährleistung ausgeschlossen
Damage resulting from improper handling, natural wear and tear or excessive use are excluded from our warranty.
Nous déclinons toute responsabilité pour les dommages résultant d’un traitement non conforme, d’une usure naturelle ou d’une sollicitation
trop importante
Los daños causados por un tratamiento inapropiado, el desgaste natural o una utilización excesiva, están excluidos de nuestra garantía
Allgemein anerkannte Regeln der Technik sind einzuhalten. (insbesondere Beachtung von DIN EN 1717 empfohlen)
Generally accepted engineering practices should be applied. (In particular, compliance with DIN EN 1717 is recommended)
Les règles de la technique généralement reconnues doivent être respectées. (Il est notamment recommandé de respecter la norme DIN EN 1717)
Deben observarse las reglas técnicas reconocidas. (se recomienda observar especialmente la norma DIN EN 1717)
Vor Einbau der Armatur Rohrleitung gut spülen
Flush pipes well before installing mixer
Purger l’installation avant la pose de la robinetterie
Antes de colocar el monobloc purgar la instalación
Bei Frostgefahr Hausanlage entleeren.
Drain system completely if danger of frost.
En cas de risque de gel, vidanger l’installation d’immeuble.
En caso de peligro de hielo, purg la instalaciòn de agua, o bien vaciar las tuberìas.

Chat with your Hansa HansaMix manual using AI

Get instant AI answers from your Hansa HansaMix manual

Ask anything about the Hansa HansaMix. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend HansaMix?

Yes No

Frequently Asked Questions

A

To maintain warranty rights, the product must be installed exclusively by a specialized sanitary engineer. DIY installation may void the guarantee.

Is this answer helpful?

A

If pressure exceeds 6 bar, you must install a pressure reducer in the main pipe to comply with noise regulations and protect the fixture.

Is this answer helpful?

A

No. Colored surfaces must never be treated with alcohol-containing or disinfectant products, as this causes damage not covered by the warranty.

Is this answer helpful?

A

This is normal dilation water dripping during heating, especially with plastic tank heaters. It is a natural process and should not be suppressed.

Is this answer helpful?

A

Use soapy water or diluted household vinegar to clean dirt and limescale. Rinse with clear water and dry thoroughly afterward.

Is this answer helpful?

A

No, it is not permissible to attach hose extensions, aerators, or flow regulators to the spout of the faucet.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-quality construction ensures long-term durability
  • Precise temperature control for user comfort
  • Compliance with strict noise emission standards (DIN 4109)
  • Easy maintenance with simple soapy water cleaning
  • Professional design fits various modern interior styles
VS

Disadvantages

  • Mandatory professional installation required for warranty
  • Sensitive surfaces can be damaged by abrasive cleaners
  • Not compatible with continuous-flow water heaters
  • Requires pressure reducer if system pressure exceeds 6 bar
  • Color variations may occur due to manufacturing process
M: QW-35-FL

Product Specification

Material

Metal/Plastic

Color

Chrome

Operation

Single-lever mixer

Installation Type

Floor-mounted, 1 hole

M: QW-35-FL

Product Description

Discover the Hansa HansaMix: Quality and Efficiency in Your Bathroom

The Hansa HansaMix represents a pinnacle of sanitary engineering, designed to bring both style and functionality to modern homes. As a premium product from a trusted manufacturer, this mixer tap is built to withstand daily use while maintaining its aesthetic appeal. The device features precise temperature control and efficient water flow, ensuring a comfortable experience for every user. Whether installed in a kitchen or bathroom, the Hansa HansaMix integrates seamlessly with existing plumbing systems.

Installation requires attention to detail to ensure longevity and warranty validity. It is crucial that the unit is fitted exclusively by a qualified sanitary specialist. Before installation, pipes must be thoroughly flushed to remove debris. Users should also be aware of pressure requirements; if system pressure exceeds 6 bar, a pressure reducer is mandatory to comply with noise emission standards. Additionally, significant pressure differences between hot and cold lines should be avoided to prevent operational issues.

Maintenance is straightforward but requires specific care. Chrome, velvet chrome, and color-coated surfaces are sensitive to acidic or abrasive cleaners. Dirt and limescale can be safely removed using soapy water or diluted household vinegar, followed by rinsing and drying. Color-coated finishes need extra gentleness during handling and cleaning. Avoid using alcohol-based disinfectants on colored surfaces, as this can cause damage not covered by the warranty. Regular cleaning intervals will keep the faucet looking pristine.

For users with unpressurized heaters containing plastic tanks, a small amount of water dripping after closing the tap is a normal phenomenon caused by thermal expansion, not a defect. This cannot and should not be stopped. Furthermore, adding hose extensions or aerators to the spout is prohibited. The flow rate should be adjusted according to DIN 44531 standards, typically set at 5 liters per minute for 5-liter appliances and 6 liters per minute for 10-liter units. If water volume decreases, descaling the aerator or nozzle is the first step before contacting a professional.

Important Notes

  • Warranty is void if installed by non-specialists.
  • Do not use abrasive sponges or acid cleaners.
  • Alcohol-free products only for colored surfaces.
  • Pressure reducers needed above 6 bar.
M: QW-35-FL

© Copyright 2026 Manual.ly