Manual.ly Logo

Hahnel Modus 600RT Manual

0.0 · 0 Ratings

PDF manual · 69 Pages

English

M: OA-GPT-54-NAN
page

/ 69

Loading...
ab654b4e4e6514607c2249e7fc4eea1b77c0 page f
GB
GB
28 Modus 600RT
Modus 600RT 29
OK
4. A red LCD will show
“Slave OK”. This slave
Modus 600 RT is now
DCM matched
5. DCM match the same
way, any additional slave
Modus 600RT while the
Master is still on
• To reset the Modus
600RT to factory default
settings press function
buttons 3 & 4 at the
same time and hold
until the LCD shows <
RESET
> release the
buttons
• When the Modus
600RT is reset the DCM
is also reset back to
open channel and the
previous DCM is lost
1. Master Unit Setting
• Attach a Modus 600RT
to the camera and set
it as the master unit
(Page 26)
• The Viper TTL
Transmitter can also be
used as a master unit
to control the wireless
slave Modus 600RT
(Page 38)
TTL Fully Automatic Wireless
Flash Shooting
Basic Automatic Wireless Flash shooting
with a Single Slave Unit
Once all slave units are DCM matched, reboot all master and
slaves by turning OFF/ON
• Once all devices are DCM matched they will memorieze
the unique ID even it power is removed. Therfore you only
need to DCM your set once
• If you add more speedlights or Viper TTL units to your
range then you need to carry out the DCM matching for all
your units again
Modus 600 RT - Reset
2. Slave Unit setting
• Set the slave Modus
600RT to <
SLAVE
>
setting (Page 26)
3. Position of camera
and speedlight
• Position the camera
with the master unit
attached and the Modus
slave within radio range
4. Set the Group
A
ash
mode to <TTL>
• Check that group <
A
> is set to <TTL>. If
not press <
MODE
> button until <TTL> is
displayed
• Check that the slave
unit is set automatically
to <TTL> by the master
unit
5 Check Master/Slave
units are ready
• Check master
speedlight, ready
indicator is lighting and
that the slave ash
ready indicators are
blinking
6 Check the Master
slave speedlight
operation
• Press the master unit’s
<
> test button
• The slave speedlight
will ash. If it does not
re, check the position
or distance of slave
from master
• You are now ready to
take a photo with the
wireless ash lighting

Chat with your Hahnel Modus 600RT manual using AI

Get instant AI answers from your Hahnel Modus 600RT manual

Ask anything about the Hahnel Modus 600RT. Answers come from this manual, with the pages they are based on.

Modus 600RT Maintenance Schedule

Regularly
Clean electrical contacts

Clean the electrical contacts of the camera flash and camera if they are dirty to ensure proper operation.

Show in the manual (page 45)
Regularly
Clean the product

Avoid sudden impacts and clean the product regularly using appropriate methods.

Show in the manual (page 45)
Usage-based
Replace battery pack

Replace the battery pack when the flash cycle time becomes longer or the number of flashes reduces noticeably.

Show in the manual (page 15)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Modus 600RT?

Yes No

Product Specification

Guide Number

60 (ISO 100)

AF Assist Light

no

Power Supply

Li-Ion Battery

Special Features

Radio

M: OA-GPT-54-NAN

Product Description

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly