Manual.ly Logo

GYS Startronic 800 Manual

0.0 · 0 Ratings

PDF manual · 38 Pages

English

M: OA-GPT-5-NAN
page

/ 38

Loading...
8f662790ddb59eff5fdb4ad05bf682fe5bc5 page 8
8
STARTRONIC 800
EN
Translation of the original instructions
• If your eyes or skin come into contact with battery acid,
rinse the affected part of the body with plenty of water
and seek immediate medical assistance.
• After the starting/charging process, disconnect the
booster/battery charger from the power supply network
and remove the connector from the car frame and then
the connector from the battery, in this order.
• After the start-up operation, disconnect the booster. First
remove the chassis connection and then the battery
connection, in the order shown.
Class III device
Maintenance:
• Service should be performed by a qualied person
• Warning! Always remove the power plug from the wall
socket before carrying out any work on the device.
• Under no circumstances should solvents or other aggressive
cleaning agents be used.
• Clean the device’s surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certicate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The
British Declaration of Conformity is available on our
website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration Cم (CMIM) of conformity is available on
our website (see cover page).
Disposal:
• This product should be disposed of at an appropriate
recycling facility. Do not dispose of in domestic waste.
• Recyclable product that falls within waste sorting
recommendations
OFF
Make sure that the vehicle’s engine is o, handbrake on.
Switch o all electrical and electronic machines in the vehicle (AC, ventilation, radio, lights,
etc).

Chat with your GYS Startronic 800 manual using AI

Get instant AI answers from your GYS Startronic 800 manual

Ask anything about the GYS Startronic 800. Answers come from this manual, with the pages they are based on.

Startronic 800 Maintenance Schedule

Before each use
Clean battery terminals

Ensure vehicle battery terminals are clean, grease-free, and free of corrosion before connecting clamps.

After use
Disconnect booster safely

Remove chassis connection first, then battery connection after starting operation is complete.

As needed
Clean device surfaces

Wipe surfaces with a soft, dry cloth. Do not use solvents or aggressive cleaning agents.

When servicing
Unplug power supply

Always remove the power plug from the wall socket before carrying out any work on the device.

Every 2 years
Professional service inspection

Maintenance must be performed only by a qualified person every two years or as required.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Startronic 800?

Yes No

Frequently Asked Questions

A

The Startronic 800 is designed for vehicles with 12V batteries (six 2V cells), suitable for petrol and diesel engines needing an emergency start. It is not for 24V systems.

Is this answer helpful?

A

From a 12V vehicle or a substitute 12V battery the internal supercapacitors reach full charge in about 2 minutes. Via a 5V/2A micro-USB source full charging takes around 15 minutes. Using the cigarette-lighter adapter also takes about 2 minutes when powered by a running vehicle.

Is this answer helpful?

A

BYPASS mode is used when standard and precharge attempts fail because the vehicle’s electronics block starting at battery voltages below about 8V. It requires disconnecting the battery’s (+) terminal, connecting the Startronic red clamp to that terminal, then activating BYPASS by long-pressing the on/off button before cranking.

Is this answer helpful?

A

Yes. A fault indicator shows red for short-circuits, polarity reversal or battery voltage under 5V, green for standard or BYPASS active, and red/green when GLOW (diesel preheating) is active. Never invert clamp polarities.

Is this answer helpful?

A

Routine cleaning should be done with a soft, dry cloth, avoiding solvents. Maintenance and repairs must be performed by qualified personnel. Always unplug power before any work and follow the safety instructions in the manual.

Is this answer helpful?

A

Yes, it includes a 2-year warranty covering manufacturing defects (parts and labour). The warranty excludes transport damage, normal wear (cables, clamps), misuse, and environmental-related failures. Proof of purchase and fault description are required for claims.

Is this answer helpful?

A

The Startronic 800 is recyclable and subject to selective collection. Do not dispose of it in household waste; follow local electronic waste recycling regulations.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Rapid charging via 12V source (~2 minutes) or USB (≈15 minutes) for quick readiness.
  • Supercapacitor design delivers high burst current for fast engine starts without heavy battery weight.
  • Multiple charge inputs: running vehicle, cigarette-lighter adapter, micro-USB or auxiliary 12V battery.
  • Dedicated BYPASS and GLOW modes handle deeply discharged batteries and diesel preheating.
  • Clear indicators and fault lamp signal polarity issues, short-circuits, and readiness status.
VS

Disadvantages

  • Micro-USB charging requires a 5V/2A source and cable (not included).
  • Cannot be used on 24V systems; risk of explosion if misconnected between 12V and 24V.
  • Not intended for charging non-rechargeable cells or long-term battery maintenance.
  • Service and repairs must be performed by qualified personnel; DIY repairs void safety guidance.
  • Limited warranty exclusions (transport damage, wear, misuse, environment-related failures).
M: OA-GPT-5-NAN

Product Specification

Battery Voltage

12V

Starting Current

800A

Dimensions

10.51x7.68x1.97in

Weight

4.10lb

M: OA-GPT-54-NAN

Product Description

GYS Startronic 800 — Powerful, Fast Vehicle Starter

The GYS Startronic 800 is a compact, high-performance portable starter designed for 12V vehicle batteries. Using supercapacitors rather than a conventional battery, it stores charge rapidly from a running vehicle, USB source, cigarette-lighter adapter or a substitute 12V battery and delivers the burst current needed to restart petrol and diesel engines within seconds. Lightweight and rugged, the unit is intended for emergency starts, preheating diesel engines in cold weather and situations where a deeply discharged battery prevents conventional starting.

Built with user safety in mind, the Startronic 800 includes clear polarity indicators and a fault lamp to warn of short-circuits, reversed connections or dangerously low battery voltage. Charging modes adapt to battery condition: Standard mode charges from the donor vehicle, Precharge lets you top up the unit via cigarette-lighter, micro-USB (5V/2A) or an auxiliary 12V battery, and Bypass mode helps start vehicles when onboard electronics block normal cranking below about 8V. A dedicated GLOW function supports preheating diesel engines once the unit is fully charged.

Operation is straightforward: connect the red clamp to (+) and black clamp to (-), press the on/off button to charge (full internal charge ~2 minutes from 12V sources, ~15 minutes via 5V/2A USB), wait until the 14V indicator is steady, then crank the engine and remove clamps once the engine runs. For deeply discharged batteries (<5V) the precharge or bypass procedures provide alternatives to restore starting capability safely.

Safety and maintenance instructions emphasize wearing eye and hand protection, avoiding short circuits, not using the unit to charge non-rechargeable cells, keeping the device away from high heat, and ensuring servicing only by qualified personnel. The device complies with relevant European, British, EAC and Moroccan declarations of conformity and should be recycled properly at end of life.

Compact and portable, the Startronic 800 is suited for roadside emergency kits, garages and fleet service vehicles. It offers rapid recharge via multiple inputs, intuitive status indicators and modes tailored to challenging starting conditions, making it a versatile tool for users who need quick, reliable engine starts without bulky jump-starters.

Notes

  • Do not invert polarity; follow indicated connection order when reconnecting after bypass operations.
  • The micro-USB cable is not supplied; use a 5V/2A source for USB charging.
  • Warranty: 2 years (exclusions for transport damage, normal wear, misuse and environmental damage).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly