Manual.ly Logo

GYS Smartmig 162 Manual

4.6 · 5 Ratings

PDF manual · 68 Pages

English

M: OA-GPT-54-NAN
page

/ 68

Loading...
3145f1afaba5e763607253ebb14ceab2cb01 page c
12
SMARTMIG
EN
EQUIPMENT INSTALLATION
• Put the machine on the oor (maximum incline of 10°).
• Ensure the work area has sufcient ventillation for welding, and that there is easy access to the control panel.
• The machine must not be used in an area with conductive metal dusts.
• The machine must be placed in a sheltered area away from rain or direct sunlight.
• The machine protection level is IP21, which means :
- Protection against acess to dangerous parts from solid bodies of a ≥12.5mm diameter and,
- Protection against vertically falling drops.
The power cables, extensions and welding cables must be fully uncoiled to prevent overheating.
The manufacturer does not incur any responsability regarding damages to both objects and persons that result from an incorrect
and/or dangerous use of the machine .
MAINTENANCE / RECOMMENDATIONS
• Maintenance should only be carried out by a qualied person. Annual maintenance is recommended.
• Ensure the machine is unplugged from the mains, and wait for two minutes before carrying out maintenance work. DANGER
High Voltage and Currents inside the machine.
• Remove the casing 2 or 3 times a year to remove any excess dust. Take this opportunity to have the electrical connections
checked by a qualied person, with an insulated tool.
• Regularly check the condition of the power supply cable. If the power cable is damaged, it must be replaced by the manufacturer,
its after sales service or an equally qualied person.
• Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
• Do not use this equipment to thaw pipes, to charge batteries, or to start any engine.
INSTALLATION – PRODUCT OPERATION
DESCRIPTION
Thank you for choosing this machine. To get the best from your machine, please read the following carefully :
The SMARTMIG is a traditional machine for welding semi-automatic MIG/MAG (DC current), and MMA (SMARTMIG 3P Only). These machines can
weld all types of wire : Steel, Stainless Steel, Aluminium, ux (no gas). The SMARTMIG 3P is capable of welding electrodes up to 3.2mm.
Adjustment and Setting of these machines is easy with their SMART feature.
ELECTRICITY SUPPLY
Smartmig 142/152/162/3P/182 :
This machine is tted with a 16A socket type CEE7/7 which must be connected to a single-phase 230V (50 - 60 Hz) power supply tted with three
wires and one earthed neutral.
The absorbed effective current (I1eff) is displayed on the machine, for optimal use. Check that the power supply and its protection (fuse and/or
circuit breaker) are compatible with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings.
Smartmig 183 :
The welders are tted with a 1XX A socket type EN 60309-1 which must be connected to a three-phase 400V (50 - 60 Hz) power supply tted with
four wires and one earthed neutral.
The absorbed effective current (I1eff) is displayed on the machine, for optimal use. Check that the power supply and its protection (fuse and/or
circuit breaker) are compatible with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings.
DEVICE PRESENTATION (FIG-I)
1- Power Switch Off/On
2- Power Cable
3- Rear handle
4- Wire Reel Support
5- Quick Gas Connector
6- Front Handle
7- Control panel and table for SMART feature
8- Drive Reel
9- Rear Wheels (162, 3P & 182 only)
10- EURO torch connector (152, 162, 3P & 182 only)
11- 200A Rapid Connector (3P only)
12- Front Wheels (162, 3P & 182 only)
13- Fixed Power Cable (142, 162, & 182 only)
14- Case protected against polarity reversal (142, 152, 162 & 182 only)
15- Fastening chain for bottles. Warning: fasten the bottles correctly.
SEMI-AUTOMATIC WELDING FOR STEEL / STAINLESS STEEL (MAG MODE) (FIG-II)
These machines can weld Steel and Stainless Steel wires of 0.6/0.8 or 1.0mm (except SMARTMIG 142/152) (Fig II - A)
The Smartmig 3P can weld steel and stainless steel wire (0.6/0.8 or 1.0 diameter), to do so please connect the earth cable on the negative terminal
at the front of the machine (g I). The machine is delivered equipped to function with Ø 0.8mm Steel/Stainless steel wire, and the contact tip, roller
throat and the sleeve of the torch supplied are suitable for this application.
Should you wish to use 0.6mm wire, you will need to change the contact tip. The wire reel is reversable (0.6 / 0.8mm) and will need to be inserted
into the machine so that the gure 0.6 is visible. For welding with Ø 1.0mm wire, you will need to use a specic roller and contact tip.
For welding with Steel or Stainless Steel it is necessary to use
For use with Steel/Stainless Steel, the gas requirement is Argon + CO2. (Ar+CO2).. The proportion of CO2 required will vary depending on the
use. For specic gas requirements, please contact your gas distributor. The gas ow in steel is between 12 and 18 Litres/minute depending on the
environment and experience of the welder.

Chat with your GYS Smartmig 162 manual using AI

Get instant AI answers from your GYS Smartmig 162 manual

Ask anything about the GYS Smartmig 162. Answers come from this manual, with the pages they are based on.

Smartmig 162 Maintenance Schedule

Remind me when maintenance is due
Every 4 months
Remove casing and clean internal dust

Remove the cover 2 to 3 times a year using compressed air. Check electrical connections with an insulated tool by qualified personnel.

Show in the manual (page 12)
Yearly
Perform annual maintenance check

Annual maintenance is recommended and must be carried out only by a qualified person.

Show in the manual (page 12)
Regularly
Check power supply cable condition

Inspect the power cord regularly. Replace if damaged by the manufacturer or qualified service to avoid danger.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Smartmig 162?

Yes No
0
User Pic

Dirk M.

10 months ago

I heard some buyers received the welder with light transport damage. How well is it packaged, and what should I do if it arrives bent or damaged?

0
User Pic

Manual.ly

10 months ago

The welder is usually shipped well protected, but if you notice any transport damage on arrival (for example a bent part, damaged torch, or a defective connection), please stop using the unit. Take clear photos of the packaging and the affected parts, then contact our support or the seller as soon as possible. We can advise on the next step, typically inspection and arranging a replacement or return within the applicable return/warranty timeframe. To avoid delays, keep all original packaging and documentation, and describe the damage and what you tested (if anything).

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is mainly used for semi-automatic MIG/MAG welding on steel and stainless steel, with the option to use flux-cored wire in gasless mode after changing polarity.

Is this answer helpful?

A

Yes, it is relatively beginner-friendly because the smart table helps match wire speed and voltage to material thickness. Some basic welding knowledge is still useful for best results.

Is this answer helpful?

A

Yes. It can work with gasless flux-cored wire if the polarity is reversed correctly. This makes it useful for outdoor or simpler repair jobs.

Is this answer helpful?

A

Yes, but aluminum welding needs the proper setup: pure argon, suitable wire, a teflon liner, the right contact tip, and compatible drive rollers.

Is this answer helpful?

A

The Smartmig 162 is designed for a single-phase 230V supply with proper grounding. The circuit protection must match the machine’s current demand.

Is this answer helpful?

A

The machine likely overheated from intensive use. Let it cool for several minutes, keep it plugged in for fan cooling, and resume once the warning clears.

Is this answer helpful?

A

Clean dust from the inside regularly, check the cable and connections, keep ventilation openings clear, and have qualified personnel perform periodic service checks.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Smart settings make voltage and wire-speed setup faster and more intuitive.
  • Supports versatile welding tasks with gas MIG/MAG and gasless flux-cored options.
  • Compact, portable design suits workshop use and frequent movement.
  • Thermal protection and clear controls help improve safe, stable operation.
VS

Disadvantages

  • Material changes may require extra parts like rollers, tips, or liners.
  • Best performance depends on correct gas, polarity, and setup knowledge.
  • Class A EMC design is better suited to industrial than residential spaces.
  • Heavy use can trigger thermal shutdown and interrupt work until cooling finishes.
M: OA-GPT-54-NAN

Product Specification

Power

8.05 hp (230V)

No-load voltage

70A

Control range

30-160A (MIG/MAG)

Dimensions

21.26x17.72x12.99in (HxWxD)

Weight

55.12 lb

M: OA-GPT-54-NAN

Product Description

GYS Smartmig 162: A Compact MIG/MAG Welder with Smart Control

The GYS Smartmig 162 MIG/MAG shielding gas welding machine Manual highlights a machine designed to make semi-automatic welding feel more approachable without stripping away performance. Built for steel and stainless steel work, this welder is aimed at users who want clean arc control, flexible setup options, and dependable results in a workshop or professional environment.

Practical Welding for Everyday Work

One of the strongest points of the Smartmig 162 is its versatility. It is made for MIG/MAG welding with shielding gas and can also be adapted for gasless flux-cored wire when the polarity is reversed. With the right setup, it handles different wire diameters and supports common metalworking tasks on thin sheet, repair jobs, and general fabrication. The machine’s smart settings table helps guide voltage and wire speed selection, which saves time and reduces trial and error.

Easy to Set Up, Easier to Use

The Smartmig concept is centered on simplifying control. Instead of demanding deep technical adjustments from the start, the machine gives a clear reference for matching material thickness with welding settings. That makes it a useful choice for operators who need efficiency, but still want room to fine-tune the arc by sound and feel. The front panel layout, wire feed system, and quick gas connection all support a smoother workflow.

Built with Safety and Reliability in Mind

Like any serious welding tool, this model places safety first. Thermal protection helps prevent overload during intensive use, while the enclosure and ventilation design are meant to support stable operation. The manual also stresses proper grounding, ventilation, correct gas handling, and regular maintenance. Those details matter because welding is not just about joining metal—it is about doing it safely, consistently, and with control.

A Good Fit for Mixed Workshop Needs

For users who work with steel, stainless steel, and occasional gasless applications, the Smartmig 162 offers a balanced mix of convenience and capability. It is especially appealing to anyone who values clear guidance, manageable setup, and a compact machine that still feels serious enough for regular production or repair tasks.

Notes

  • Use the correct wire, gas, and contact tip for each material.
  • Keep ventilation strong and work in a clean, dry area.
  • Let the machine cool after heavy welding cycles.
  • Regular cleaning and cable checks help maintain performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly