Manual.ly Logo

GYS Batium 15/24 Manual

5.0 · 6 Ratings

PDF manual · 45 Pages

English

M: QW-35-FL
page

/ 45

Loading...
4ebbaccd973d6263eec6a5c8d289663c3cf2 page 4
BATIUM 7/12 • 7/24 • 15/12 • 15/24
4
FR
Notice originale
• Régulièrement, enlever le capot et dépoussiérer à la
soufette. En proter pour faire vérier la tenue des
connexions électriques avec un outil isolé par un personnel
qualié.
• N’utiliser en aucun cas des solvants ou autres produits
nettoyants agressifs.
• Nettoyer les surfaces de l’appareil à l’aide d’un chiffon
sec.
Réglementation :
• Appareil conforme aux directives européennes.
• La déclaration de conformité est disponible sur notre site
internet.
• Marque de conformité EAC (Communauté économique
Eurasienne).
Mise au rebut :
• Ce matériel fait l’objet d’une collecte sélective. Ne pas
jeter dans une poubelle domestique.
DESCRIPTION GENERALE
Les appareils Batium ont été conçus pour la recharge des batteries de démarrage au plomb, à électrolyte liquide ou gel:
Modèles 7 / 12 7 / 24 15 / 12 15 / 24
Tension 6 V 12 V 6 V 12 V 24 V 6 V 12 V 6 V 12 V 24 V
Capacité batterie De 15 Ah à 130 Ah De 35 Ah à 225 Ah
BRANCHEMENT ET FONCTIONNEMENT GÉNÉRAL
Respecter l’ordre de mise en route.
Précaution : Vérier le niveau de l’électrolyte pour les batteries ouvertes. Compléter les niveaux si nécessaire avant la
charge.
1. Brancher les pinces : pince rouge sur la borne + de la batterie et pince noire sur la borne –.
2. Brancher le chargeur sur la prise secteur 230 V. Un voyant en
A
(schéma interface p.44) et en
B
s’allume correspondant aux dernières données mémorisées.
3. Choisir la tension de la batterie (6, 12, 24 V) selon les indications inscrites
sur la batterie ou en fonction de l’éventuel couplage réalisé (série ou parallèle
cf p.44).
Risque d'explosion ou de projection d'acide en cas d'une mau-
vaise sélection de la tension (24V pour une batterie de 12V).
Pour valider la sélec-
tion, ne toucher à rien
pendant 5 secondes.
4. Choisir la capacité de la batterie. Le Batium dénit, de lui même, le courant
de charge.

Chat with your GYS Batium 15/24 manual using AI

Get instant AI answers from your GYS Batium 15/24 manual

Ask anything about the GYS Batium 15/24. Answers come from this manual, with the pages they are based on.

Batium 15/24 Maintenance Schedule

Regularly
Clean dust from inside and check connections

Remove the cover and blow out dust with an air gun. Have a qualified person check electrical connections using insulated tools.

As needed
Clean device surfaces

Wipe the device's exterior surfaces with a dry cloth. Do not use solvents or aggressive cleaning agents.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Batium 15/24?

Yes No
0
User Pic

msporer13

5 months ago

Does this charger support LiFePo4 batteries and does it have a power switch?

0
User Pic

Manual.ly

5 months ago

This charger reliably handles 6V, 12V, and 24V batteries, including deeply discharged ones, and automatically switches to maintenance mode. However, it is not suitable for LiFePo4 batteries. Additionally, the device lacks a dedicated on/off switch; it starts measuring and charging immediately upon plugging in. Users often find an extension cord helpful to adjust settings quickly before the process begins.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Maria Schmidt

6 months ago

Is there any noise issue with this charger during operation?

M: QW-35-FL

Frequently Asked Questions

A

The GYS Batium 15-24 is designed to charge lead-acid batteries, including those with liquid electrolyte and gel technology. It supports voltages of 6V, 12V, and 24V.

Is this answer helpful?

A

The SOS Recovery function activates when a battery has suffered a deep discharge and begun to sulfate. It runs a specific 24 to 48-hour regeneration cycle to attempt to restore the battery's capacity.

Is this answer helpful?

A

Yes, once the battery is fully charged, the device switches to a floating charge mode (maintenance mode) which keeps the battery topped up without overcharging.

Is this answer helpful?

A

If no indicators light up, disconnect the charger from the mains for 10 seconds and then reconnect it. Ensure the power outlet is functioning and the plug is securely inserted.

Is this answer helpful?

A

Yes, the device is intended for indoor use only. However, the battery being charged must be placed in a well-ventilated area to prevent the accumulation of explosive gases.

Is this answer helpful?

A

The GYS Batium 15-24 comes with a 2-year warranty covering manufacturing defects and parts. Normal wear and tear, such as damaged cables, are not covered.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports 6V, 12V, and 24V batteries with capacities up to 225 Ah
  • Includes SOS Recovery mode to regenerate deeply sulfated batteries
  • Features automatic voltage and current selection for ease of use
  • Protected against short circuits, reverse polarity, and vehicle start surges
  • Resumes charging automatically after a power outage
VS

Disadvantages

  • SOS Recovery function takes 24 to 48 hours to complete a cycle
  • Requires manual activation of forced charge for very low voltage batteries
  • Internal fuse replacement must be done by qualified personnel only
  • Not suitable for charging non-rechargeable primary cells
  • Requires a well-ventilated area due to potential explosive gas emission
M: QW-35-FL

Product Specification

Suitable for

AGM, Lead, Gel

Battery voltage

6V, 12V, 24V

Max charging current

15A

Display

LED

Features

Pulse repair function

Color

yellow, blue

Dimensions

14.17x5.51x8.27in (WxDxH)

Weight

18.74lbs

M: QW-35-FL

Product Description

GYS Batium 15-24: The Ultimate Battery Charging Solution

The GYS Batium 15-24 is a sophisticated electronic battery charger designed to handle the demanding needs of modern lead-acid, liquid electrolyte, and gel batteries. Whether you are maintaining a small vehicle or managing larger equipment, this device offers versatility with support for 6V, 12V, and 24V systems. It is engineered to charge batteries ranging from 35 Ah up to 225 Ah, making it an ideal tool for automotive enthusiasts and professional mechanics alike.

This charger features advanced automatic operation that simplifies the charging process. Once connected correctly, the unit detects the battery voltage and capacity, then automatically selects the appropriate charging current. Users can monitor the progress through clear LED indicators that display three distinct stages: voltage rise, voltage regulation, and floating charge maintenance. If a power interruption occurs, the Batium 15-24 intelligently remembers its state and resumes charging exactly where it left off, ensuring no energy is wasted.

For deeply discharged batteries that fail to start a normal cycle, the device includes a Forced Charge function. This feature allows users to manually initiate charging when the battery voltage drops below 2V. Additionally, the 15-24 model boasts a unique SOS Recovery mode specifically designed to revive sulfated batteries. By applying a specialized charging curve over a 24 to 48-hour period, this function can restore batteries that appear completely dead due to long-term deep discharge.

Safety is paramount in the design of the GYS Batium 15-24. It is equipped with multiple protections against short circuits, polarity reversals, and sparks during connection. The unit also prevents damage caused by vehicle engine starts while connected. To ensure longevity, the device requires regular dusting and should never be covered or exposed to moisture. Always disconnect from the mains before handling connections to maintain safety standards.

M: QW-35-FL

© Copyright 2026 Manual.ly