Grundfos COMFORT 15-14 BA PM Manual
PDF manual · 34 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Grundfos COMFORT 15-14 BA PM manual using AI
Get instant AI answers from your Grundfos COMFORT 15-14 BA PM manual
Ask anything about the Grundfos COMFORT 15-14 BA PM. Answers come from this manual, with the pages they are based on.
COMFORT 15-14 BA PM Maintenance Schedule
The AUTO ADAPT function runs a disinfection cycle for 15 minutes once a week to prevent legionella contamination.
If the pump is switched off for eight hours, it automatically turns on for 15 minutes to flush the circulation pipe.
Ask a Question
Do you recommend COMFORT 15-14 BA PM?
Yes NoFrequently Asked Questions
Liquid temperature range is 2 to 95 degrees Celsius. It is recommended to keep operating temperature around 50 degrees Celsius to minimize lime deposits and risk of legionella contamination.
Is this answer helpful?
It learns your hot water consumption pattern. It logs tapping events and automatically adjusts operating hours to save energy without compromising comfort.
Is this answer helpful?
It operates on 230 volts at 50 or 60 Hz. Some models for the USA use 115 to 230 volts.
Is this answer helpful?
No, liquids must be thin, clean, non-aggressive and non-explosive without solid particles or fibres.
Is this answer helpful?
The port-to-port length is 80 mm for standard versions and 140 mm for versions with isolating valves.
Is this answer helpful?
No, it must be installed indoors in a non-aggressive and non-explosive atmosphere.
Is this answer helpful?
All models are electrically double insulated, meaning class II protection without a need for a protective earth connector.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- AUTOADAPT function saves significant electrical and heat energy consumption automatically.
- Brass housing makes the pump suitable for drinking water systems safely.
- Permanent magnet motor ensures high efficiency and low noise levels.
- Stainless steel separator provides hermetic sealing without mechanical seals.
- Easy maintenance with separable motor and pump housing design.
Disadvantages
- Requires external temperature sensor for AUTOADAPT mode functionality.
- Must be installed indoors only in non-aggressive atmosphere.
- Learning period of two weeks needed for pattern optimization.
- Minimum inlet pressure of 0.5 bar required to prevent noise.
- Thermostatic valves must be set to maximum if used with the pump.
Product Specification
Rated Power
7W (230V)
Lift Height
35.43 in
Pressure
Max 145.04 PSI
Flow Rate
1.80 gal/min
Connection
1/2"
Features
IP44
Weight
2.38 lbs
Product Description
Grundfos COMFORT 15-14 BA PM Circulation Pump Overview
The Grundfos COMFORT 15-14 BA PM Circulation Pump stands out as a premier solution for maintaining comfortable water temperatures in domestic hot water systems. Designed for single and two-family houses, this device ensures that hot water is available at the tap with minimal waiting time. It is particularly effective in systems utilizing water storage tanks where consistent circulation is vital for hygiene and user satisfaction.
Advanced AUTOADAPT Functionality
One of the key highlights of this pump is the AUTOADAPT system found in the BA PM models. This intelligent feature analyzes your household usage patterns. By monitoring tapping events, it learns when you typically use hot water. Consequently, the pump adjusts its operation schedule to run only when necessary. This intelligent approach significantly reduces both electrical and heat energy consumption. You do not need to manually set timers since the pump adapts to the weekly routine over a two-week learning period. Once adapted, it switches off during quiet times to save power.
Robust Construction and Safety
The pump features a brass pump housing which is ideal for drinking water applications. It is electrically double insulated, meeting Protection Class II standards, which means a protective earth connector is not needed. Inside, a permanent magnet motor drives the impeller with high efficiency and low noise. The motor is separated from the water by a stainless steel spherical separator, ensuring hermetic sealing without traditional mechanical seals. This design minimizes maintenance and extends the product life significantly.
Operating Conditions and Performance
Suitable for temperatures between 2 and 95 degrees Celsius, the pump handles various liquids like clean water and cooling liquids. It operates at a maximum system pressure of 1.0 MPa. The dimensions are compact, with a port-to-port length of 80 mm for standard connections. It works on 230 volts at 50 or 60 Hz frequencies common in Europe and other regions. Installation is designed for indoor use in non-aggressive atmospheres with humidity not exceeding 95 percent. Disinfection runs occur weekly to maintain hygiene if the temperature exceeds limits. Users often look up Grundfos COMFORT 15-14 BA PM Circulation Pump Manual resources for specific guidance.
Installation and Maintenance Tips
Remember to install the external temperature sensor 20 to 50 cm from the boiler outlet for optimal AUTOADAPT performance. If the system uses thermostatic valves, ensure they are set to maximum to avoid conflicting control signals. The motor can be separated from the pump housing to allow for easy maintenance and replacement if required. The terminal box is easily accessible for wiring. Regular operation ensures the water remains hot without wasting energy during idle periods.
Search for 67,706 Manuals online
Type-in Brand or Model