Grove PIR Motion Sensor Manual
PDF manual · 12 Pages
English
Quick check
Incorrect answer, please try again.
Chat with your Grove PIR Motion Sensor manual using AI
Get instant AI answers from your Grove PIR Motion Sensor manual
Ask anything about the Grove PIR Motion Sensor. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend PIR Motion Sensor?
Yes NoFrequently Asked Questions
It detects motion by sensing changes in infrared energy within its range. When movement is detected, it outputs a HIGH signal on the SIG pin, which can trigger lights, alerts, or other actions in a project.
Is this answer helpful?
Yes. Its Grove connector makes it simple to wire, and basic examples are available for common platforms. It is a practical choice for learning motion detection without complex setup.
Is this answer helpful?
The sensor is shown working with Arduino, TI LaunchPad, and Raspberry Pi. That makes it versatile for different development environments and prototyping workflows.
Is this answer helpful?
The default measuring range is about 3 meters, but the text notes that it can support roughly 0.1 to 6 meters depending on configuration and conditions.
Is this answer helpful?
Yes. The hold time and detection distance can be adjusted with onboard potentiometers, and the module can also be configured as retriggerable or non-retriggerable using a jumper setting.
Is this answer helpful?
It works well for motion-activated lights, security alerts, occupancy detection, and interactive electronics. Any project that needs simple human motion sensing can benefit from it.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Simple Grove interface makes wiring fast and beginner-friendly.
- Works with Arduino, TI LaunchPad, and Raspberry Pi.
- Low power consumption suits continuous monitoring projects.
- Adjustable range, hold time, and retrigger mode improve flexibility.
Disadvantages
- Detection can be very sensitive, which may cause unwanted triggers.
- Default range is modest unless adjusted for a wider area.
- Performance depends on correct jumper and potentiometer settings.
- Best use requires careful placement and calibration for reliable results.
Product Specification
Manufacturer
SeeedStudio
Type
PIR Motion Sensor Module (BISS0001)
Platform
Grove, C-Control Open Duino
Connectivity
Grove-Port
Power Supply
via Host
Product Description
Grove PIR Motion Sensor BISS0001 Manual: A Compact Motion-Sensing Module for Smart Projects
The Grove PIR Motion Sensor BISS0001 Manual describes a small but practical sensor designed to detect movement in a simple, reliable way. Built around a Grove-compatible interface, this module is ideal for makers who want to add human presence detection to alarms, lighting systems, interactive installations, or low-power automation projects.
At its core, the sensor responds to infrared changes caused by motion within its field of view. When someone moves through the detection zone, the SIG pin outputs a HIGH signal, making it easy to connect the sensor to popular development boards. The module works especially well in beginner-friendly Grove ecosystems, where wiring is reduced to a straightforward plug-and-play experience.
One of the strongest features of this sensor is its flexibility. It supports use with Arduino, TI LaunchPad, and Raspberry Pi, giving hobbyists and developers multiple ways to prototype the same idea. The sensor also offers practical operating settings, including a default detection range of around 3 meters, adjustable coverage up to 6 meters, a hold time from 1 to 25 seconds, and a 120-degree viewing angle.
The BISS0001-based design is efficient and low power, which makes it suitable for always-on applications. It draws only small amounts of current, so it can fit into battery-conscious builds or compact embedded systems. In addition, the module can be configured as retriggerable or non-retriggerable, allowing more control over how repeated motion is handled.
For blog readers exploring motion sensing, this sensor stands out as a dependable starting point. It is easy to wire, easy to test, and easy to integrate into real projects. Whether you want a light that turns on when someone enters a room or a prototype that reacts to movement, this module provides a clean and accessible solution.
Notes
- Motion detection is highly sensitive, so placement matters.
- Detecting distance and hold time can be tuned with onboard potentiometers.
- Jumper settings affect how motion events are retriggered.
- Best results come from careful calibration and stable mounting.
Search for 67,706 Manuals online
Type-in Brand or Model
