Manual.ly Logo

Ground Zero Titanium GZTC 130 Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
eda030a39bd2cfdd155adc16d28a05f8b35e page 2
TITANIUM-SERIES
COMPONENT SYSTEM
Anleitung / Owner´s manual
GZTC 130
Spezifikationen / specifications
• Hochwertiges 2-Wege Komponentensystem
• Klippel® optimierter 3 Ohm Tief-Mitteltöner mit HQPP-Struktur Membrane
• Resonanzarmer Stahlkorb
• 19 mm Seidenkalotten-Hochtöner mit Einbauzubehör
• Kompakte 12 dB/Okt. Hochton-Frequenzweiche
• 6 dB/Okt. Tiefton-Frequenzweiche direkt am Tief-/Mitteltöner
o High quality 2-way component system
o Klippel® optimized 3 Ohm midwoofer with HQPP-Structure cone
o Resonance free steel basket
o 0.75" silk dome tweeter with mounting accessories
o Compact 12 dB/oct. tweeter high pass crossover
o 6 dB/oct. low pass crossover attached to the midwoofer

Chat with your Ground Zero Titanium GZTC 130 manual using AI

Get instant AI answers from your Ground Zero Titanium GZTC 130 manual

Ask anything about the Ground Zero Titanium GZTC 130. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Titanium GZTC 130?

Yes No

Frequently Asked Questions

A

They are a Titanium Series 2-way component system. A 130 mm 3 Ohm midwoofer handles the low to mid frequencies, while a 19 mm silk dome tweeter covers the highs. The crossover is designed to integrate both sections cleanly.

Is this answer helpful?

A

The crossover is set at a cut-off frequency of 5500 Hz. It uses a 12 dB per octave high-pass for the tweeter and a 6 dB per octave low-pass for the midwoofer section.

Is this answer helpful?

A

The tweeter has a three-step level adjustment achieved by changing the wiring connection. The settings provide approximately -2 dB, 0 dB, or +2 dB relative to the baseline tweeter level, letting you better match cabin acoustics and speaker placement.

Is this answer helpful?

A

The published frequency response is 60 Hz to 22 kHz. Sensitivity is rated at 88.5 dB for 1W at 1 meter, which helps you estimate how the system will respond to your amplifier power.

Is this answer helpful?

A

No, because the system is rated at 3 Ohm impedance. Use an amplifier and installation plan that are compatible with 3 Ohm loads to ensure stable performance.

Is this answer helpful?

A

Power handling is listed as 80 W RMS and up to 130 W maximum. Staying within the recommended operating range helps protect the drivers and maintain reliable sound quality.

Is this answer helpful?

A

Warranty coverage follows local legal regulations and is handled through Ground Zero local distribution partners based on their terms. Returns typically require prior agreement and the original packaging. Include a machine-generated proof of purchase and a description of the issue. Defects caused by overload, improper handling, or competitive use are excluded.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Klippel-optimized 3 Ohm midwoofer with HQPP-structure cone for accurate midrange character
  • Resonance-free steel basket helps keep the woofer stable and composed
  • 19 mm silk dome tweeter with mounting accessories for detailed high frequencies
  • Compact crossover with 12 dB/oct high-pass and 6 dB/oct low-pass
  • Three-step tweeter level tuning (-2 dB, 0 dB, +2 dB) through wiring
VS

Disadvantages

  • 3 Ohm impedance requires an amplifier that supports it
  • Tuning depends on correct wiring and tweeter level selection
  • Sound balance can vary with installation angle, affecting perceived midrange
M: OA-GPT-54-NAN

Product Specification

Type

Component system

Amplification

passive

Design

2-way

Tweeter

0.75 in / 19.1 mm

Mid-range speaker

5.2 in / 132.1 mm

Frequency range

60 Hz-22 kHz

Power

80 W RMS, 130 W Peak

Impedance

4 Ω

Sensitivity

89 dB

Mounting depth

2.40 in

Mounting diameter

4.65 in

M: GO-GEM-FL-25

Product Description

Ground Zero Titanium GZTC 130

Overview

Bring clear, controlled sound to your car with the Ground Zero Titanium GZTC 130, a high-quality 2-way component system designed for detailed midrange and crisp highs. Built around a Klippel-optimized 3 Ohm midwoofer and a silky dome tweeter, it aims to deliver smooth integration and confident dynamics. With the Ground Zero Titanium GZTC 130 Manual, setup and wiring options are made straightforward, helping you match the tweeter level to your listening preferences.

Audio design and crossover behavior

The GZTC 130 pairs a 130 mm midwoofer featuring an HQPP-structure cone and a resonance-free steel basket. For the high end, it uses a 19 mm silk dome tweeter with mounting accessories for stable installation. Crossover filtering is optimized for coherence: the tweeter section uses a compact 12 dB per octave high-pass, while the midwoofer section uses a 6 dB per octave low-pass directly on the woofer module. The system's cut-off frequency is set at 5500 Hz to balance energy across the crossover region.

A key tuning feature is the tweeter level adjustment. By changing the connection wiring, you can select one of three tweeter settings (approximately -2 dB, 0 dB, or +2 dB relative to the base level). This helps you compensate for cabin acoustics, speaker placement, and personal taste.

Specifications at a glance

  • Frequency response: 60 Hz - 22 kHz
  • Impedance: 3 Ohm
  • Sensitivity: 88.5 dB (1W/1M)
  • Power handling: 80 W RMS, up to 130 W max
  • Tweeter level adjustment: 3-step via wiring
  • Crossover slopes: 12 dB/oct high-pass, 6 dB/oct low-pass
  • Key sizes: 130 mm midwoofer outer diameter, 117.5 mm mounting diameter, 61 mm mounting depth; 37 mm tweeter outer diameter, 18 mm mounting depth

Key results

  • Klippel-optimized 3 Ohm midwoofer for a refined, controlled midrange.
  • 12/6 dB/oct crossover at 5500 Hz for smooth handoff between woofer and tweeter.
  • 19 mm silk dome tweeter tuned for detailed, non-harsh high frequencies.
  • Three-step tweeter level selection (-2 dB, 0 dB, +2 dB) via wiring for better in-car matching.
  • 60 Hz to 22 kHz response supports full-range listening with strong top-end clarity.

Notes

  • Check your amplifier for 3 Ohm stability before installing.
  • Warranty coverage follows local rules and partner terms; returns generally require prior agreement and original packaging.
  • Exclusions can apply for overload, improper handling, or damage related to competitive use.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly