Manual.ly Logo

Ground Zero Titanium GZTA 1.800DX-II 24V Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: OA-GPT-54-NAN
page

/ 56

Loading...
da5ca94cd046f7cdd21b92f5c6705039b06f page d
- 4 -
Control and functions
1
Speaker terminals
For connection of the subwoofer
2
Power terminals
GND -> Ground connection
REM -> Remote antenna terminal
BATT -> +24 Volt
3
Satus indication
GREEN – OK
RED – Error
4
Cinch inputs
Terminal for connection of the RCA wires.
To avoid failure, please use high quality RCA wires.
5
Input level controller
With this controller you can adjust the input sensitivity.
6
Bass boost controller
For adjusting of the bass boost level in the range from 0 to +12 dB.
7
Low pass controller
Adjust the variable lowpass frequency to the desired frequency between 30
and 250 Hz using the controller.
8
Master / Slave Switch
For choosing the operation mode of each amplifier in link mode.
9
Cinch Outputs
For connection of additional amplifiers in fullrange operation.
10
Remote control input
For connection of the bass remote control.
11
Phase shift controller
This controller allows you to fit the subwoofer channel in-phase to the front
system.
12
Subsonic controller
This controller allows you to filter low frequencies in a range between 10
and 50 Hz. This function reduces the mechanical Xmax and raises the
capacity of the connected subwoofer.
13
Master/Slave
Cinch-In-/Output
Cinch In- / Output for operation of two same amplifiers in linkmode.
Turning on the amplifier
The amplifier automatically turns on a few seconds after you turn on your radio.
Note: Your amplifier temporarily shuts down if it gets too hot, then restarts automatically once it cools
(At about 80° / 176° F).
Adjusting the audio level
1. LEVEL (Min/Max): Turn fully counter- clockwise to MIN position
2. Turn the auto sound system's volume control to about two-third of its full range.
3. Adjust LEVEL to a comfortable listening level.

Chat with your Ground Zero Titanium GZTA 1.800DX-II 24V manual using AI

Get instant AI answers from your Ground Zero Titanium GZTA 1.800DX-II 24V manual

Ask anything about the Ground Zero Titanium GZTA 1.800DX-II 24V. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Titanium GZTA 1.800DX-II 24V?

Yes No

Frequently Asked Questions

A

It is designed specifically for 24V vehicle electrical systems, such as trucks. That makes it compatible with heavy-duty setups where standard 12V amplifiers would not be appropriate. It also offers strong low-end power and advanced tuning controls.

Is this answer helpful?

A

No, it should only be used in 24V systems. The manual warns that using it in a 12V vehicle can damage the amplifier and possibly other parts of the system. It is built for 24V operation from the start.

Is this answer helpful?

A

It is best for subwoofer-focused systems that need high bass output. The low-pass filter, subsonic filter, bass boost, and phase shift controls make it especially useful for controlled low-frequency performance.

Is this answer helpful?

A

It means the amplifier can safely operate with a 1 ohm speaker load, which allows higher output in suitable installations. The load must still be wired correctly, and the system should stay within the recommended limits.

Is this answer helpful?

A

Link mode lets two matching amplifiers work together for more output. In this model, the system can reach much higher power in 2-ohm linked operation, which is useful for larger bass systems in demanding vehicles.

Is this answer helpful?

A

Like any high-power Class D amplifier, it can generate heat during strong use. Good airflow helps maintain stable performance and reduces the chance of thermal shutdown or protection mode activation.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 24V-only design fits trucks and other heavy-duty vehicles.
  • 1 ohm stability and link mode provide flexible power options.
  • Useful tuning controls help shape bass with precision.
  • Built-in protection features improve safety and reliability.
VS

Disadvantages

  • Not suitable for standard 12V car audio systems.
  • Best performance depends on correct installation and cooling.
  • High-power setup requires careful impedance matching.
  • May be more complex than basic plug-and-play amplifiers.
M: OA-GPT-54-NAN

Product Specification

Type

Mono Amplifier

Channels

1

Power 4Ω

1x 350W

Power 2Ω

1x 550W

Power 1Ω

1x 850W

Dimensions

14.41x2.01x9.06in

M: OA-GPT-54-NAN

Product Description

Ground Zero Titanium GZTA 1.800DXII-24V Manual: Power Built for 24V Vehicle Audio

The Ground Zero Titanium GZTA 1.800DXII-24V Manual reveals a monoblock amplifier designed for heavy-duty audio setups in trucks and other 24-volt vehicles. Built around a Class D architecture, it focuses on strong output, efficient operation, and practical tuning tools that help shape deep bass with control rather than guesswork.

Made for demanding 24V systems

This amplifier is clearly aimed at drivers who need serious performance in vehicles with a 24V electrical supply. It offers stable operation down to 1 ohm, plus a link mode option for more power when two matching units are combined. That makes it a flexible choice for subwoofer-based systems where output and stability matter.

The feature set is well balanced for real-world use. You get adjustable low-pass filtering, variable subsonic filtering, bass boost, phase shift, and input sensitivity control. These settings make it easier to match the amplifier to different enclosures, radios, and subwoofers. A bass remote control input adds even more convenience for fine-tuning from the cabin.

Designed for control, protection, and efficiency

Ground Zero also emphasizes reliability. The amplifier includes thermal, short-circuit, and overload protection, along with status indicators that help diagnose problems quickly. A soft delayed remote turn-on helps reduce startup stress, while the MOSFET power supply supports efficient delivery of power in compact form.

On the output side, the GZTA 1.800DXII-24V is rated for serious numbers: up to 850 watts RMS at 1 ohm, and up to 1700 watts RMS in 2-ohm link mode at 28 volts. For users building a powerful subwoofer system in a truck, that is more than enough to create impact, depth, and clear low-end pressure.

Installation notes

The amplifier should be installed with proper ventilation and with all wiring protected from sharp edges, heat, and vibration. The manual strongly advises disconnecting the battery before installation and using correct cable sizes and fusing on the battery side. Because this model is made specifically for 24V systems, it should not be used in 12V vehicles.

Notes

  • Best suited for trucks and other 24V vehicles
  • Ideal for subwoofer-focused audio builds
  • Requires careful installation and correct impedance matching
  • Cooling space and proper wiring are essential for safe operation
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly