Manual.ly Logo

Ground Zero Iridium GZIA 2130HPX-II Manual

0.0 · 0 Ratings

PDF manual · 31 Pages

English

M: OA-GPT-54-NAN
page

/ 31

Loading...
3b684b8af89cee5a4c1fc13c92e724c67b5b page 1
IRIDIUM-SERIES
AMPLIFIER
OWNER’S MANUAL
GZIA 1.600HPX-II
GZIA 2080HPX-II GZIA 2130HPX-II
GZIA 2235HPX-II GZIA 4115HPX-II
Features
• 4 Ohm / 2 Ohm stable Stereo
• 1 Ohm stable Mono (GZIA 1.600HPX-II)
• Power & Protection indicator
• Bass Boost (1.600HPX-II)
• Variable highpass (GZIA 2080HPX-II / 2235HPX-II / 2130HPX-II / 4115HPX-II)
• Variable lowpass
• Auto-On @ High Level Input
• Adjustable input sensitivity
• Soft delayed remote turn- on
• Bass remote ( 1.600HPX-II / 2235HPX-II & GZIA 2130HPX-II optional)
• Thermal / Short / Overload protection

Chat with your Ground Zero Iridium GZIA 2130HPX-II manual using AI

Get instant AI answers from your Ground Zero Iridium GZIA 2130HPX-II manual

Ask anything about the Ground Zero Iridium GZIA 2130HPX-II. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Iridium GZIA 2130HPX-II?

Yes No

Frequently Asked Questions

A

Yes. The amplifier supports Auto-On with High Level inputs, so it can turn on automatically when it detects signal from speaker-level outputs. Use the recommended grounding approach described in the guidance to minimize potential noise.

Is this answer helpful?

A

No. Do not use Cinch and High level inputs in parallel. The instructions recommend choosing one input method (either RCA/Cinch or High Level) to prevent damage and avoid unwanted behavior.

Is this answer helpful?

A

The highpass controller covers 40 Hz to 3000 Hz, and the lowpass controller covers 30 Hz to 250 Hz (depending on the controller position). The mode switch selects LPF, HPF, or FLAT for flexible tuning.

Is this answer helpful?

A

With High level input configuration, the amplifier automatically turns on a few seconds after the head unit signal is present. This eliminates the need for the remote turn-on terminal in systems using high level inputs.

Is this answer helpful?

A

It includes thermal, short, and overload protection. If the unit overheats, it temporarily shuts down and then restarts automatically once cooled (around the temperature threshold noted in the guidance).

Is this answer helpful?

A

According to the CEA-2006-A specifications shown, it is rated at 2 x 85 W at 4 ohms and 2 x 130 W at 2 ohms. Always match wiring and speaker impedance to the supported configurations.

Is this answer helpful?

A

Yes. Disconnect the battery before wiring, fuse the +12 V connection on the battery side, and replace fuses only with identical ratings. Also route power and signal cables safely to avoid sharp edges and heat exposure.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Variable crossover tools (Highpass, Lowpass, and mode switch) make it easier to tune your system accurately.
  • Auto-On at high level input supports installation with OEM head units without RCA outputs.
  • Adjustable input sensitivity (200 mV to 6 V) helps match a wide range of sources.
  • Protection features include thermal shutdown, short, and overload protection for safer operation.
  • CEA-2006-A rated power performance: strong output at common loads (4 ohm and 2 ohm).
VS

Disadvantages

  • High level input handling requires correct grounding practices to reduce potential noise.
  • Cinch (RCA) and High level inputs must not be used in parallel, or the amplifier can be damaged.
  • Thermal protection can temporarily mute output if airflow or mounting conditions are poor.
M: OA-GPT-54-NAN

Product Specification

Type

Stereo Amplifier

Channels

2

Power 4Ω

2x 85W

Power 2Ω

2x 130W

Dimensions

7.56x1.93x8.43in

M: GO-GEM-FL-25

Product Description

Ground Zero Iridium GZIA 2130HPX-II (Ground Zero Iridium GZIA 2130HPX-II Manual)

The Ground Zero Iridium GZIA 2130HPX-II is a compact, high-performance car amplifier designed for clean mid and high reproduction with flexible crossover control. Built for car audio enthusiasts who want precise tuning, it combines variable highpass and lowpass filtering with an easy mode switch so you can shape your system for subwoofers, full-range speakers, or mixed setups.

At the heart of the unit is adjustable input sensitivity (200 mV to 6 V) and a dedicated crossover approach: set the High Pass controller for frequencies from 40 Hz up to 3000 Hz, or use the Low Pass controller for 30 Hz to 250 Hz, depending on how you position the filter and mode switch (LPF, HPF, or FLAT). This helps you dial in sound for different speaker placements and listening preferences without guesswork.

For compatibility, the GZIA 2130HPX-II supports Auto-On at high level inputs. This is ideal when your factory radio does not provide RCA outputs, letting the amplifier start automatically when it detects signal. When using high-level input, follow the guidance to avoid unintended noise by using the additional ground connection described in the Ground Zero Iridium GZIA 2130HPX-II Manual notes.

Power and stability matter, and this amplifier is tuned for strong everyday performance. With CEA-2006-A rated output, it delivers 2 x 85 W at 4 ohms and 2 x 130 W at 2 ohms. The design includes a damping factor over 150 and a signal-to-noise ratio above 85 dB, supporting detailed sound with reduced hiss and distortion.

Equally important is protection. Thermal, short, and overload protection help safeguard the amplifier during demanding sessions. If temperatures rise too far, it temporarily shuts down and then restarts after cooling, keeping operation predictable.

Top results you can expect

  • Variable crossover tuning lets you control what your speakers receive with selectable LPF, HPF, or FLAT behavior.
  • Auto-On with high level inputs supports OEM head units lacking RCA outputs.
  • Adjustable sensitivity (200 mV to 6 V) helps match different source outputs.
  • Built-in protection (thermal, short, overload) improves reliability during long listening.

Notes for a smoother setup

  • Disconnect the vehicle battery before connecting +12 V power wiring.
  • Fuse +12 V on the battery side and replace fuses only with identical ratings.
  • Do not use High level inputs and Cinch inputs in parallel; choose one input method.
  • Ensure safe routing: avoid sharp edges, protect wiring from heat, and plan cooling space.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly