Ground Zero Competition GZCT 5000SPL-B Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Ground Zero Competition GZCT 5000SPL-B manual using AI
Get instant AI answers from your Ground Zero Competition GZCT 5000SPL-B manual
Ask anything about the Ground Zero Competition GZCT 5000SPL-B. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Competition GZCT 5000SPL-B?
Yes NoFrequently Asked Questions
It is a compression tweeter designed for high-output audio systems. Its horn-loaded design helps project high frequencies efficiently and with strong clarity, especially in competition-style builds.
Is this answer helpful?
The GZCT 5000SPL-B is rated at 70 watts RMS and 180 watts maximum. It is efficient enough to produce strong output without needing excessive amplifier power.
Is this answer helpful?
Its stated frequency response is 1.5 kHz to 20 kHz. That range is focused on the upper part of the audio spectrum, where detail, sparkle, and vocal clarity are most noticeable.
Is this answer helpful?
Yes, it is built with SPL and competition use in mind. Its high sensitivity, horn design, and strong materials make it a good match for loud, efficient systems.
Is this answer helpful?
The tweeter measures 200 x 150 mm overall, with a mounting diameter of 165 x 130 mm and a mounting depth of 142 mm. Space planning is important before installation.
Is this answer helpful?
No, the warranty excludes damage caused by overload, misuse, or competition use. The product should be used and installed carefully to avoid issues not covered by warranty.
Is this answer helpful?
It uses a titanium dome, a glass-fiber reinforced ABS horn, and a 44.5 mm copper-clad aluminium round wire voice coil. These parts are chosen for strength, efficiency, and high-frequency performance.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High 108 dB sensitivity for strong output with less power.
- Titanium dome and tractrix horn support clear, focused treble.
- Wide 1.5 kHz to 20 kHz response for detailed high frequencies.
- Durable build with reinforced ABS horn and large voice coil.
Disadvantages
- Competition or SPL use is excluded from warranty coverage.
- Large mounting depth may complicate installation in tight spaces.
- Only 70W RMS, so careful power matching is important.
- Requires proper tuning to avoid overload or harsh playback.
Product Specification
Type
Tweeter
Amplification
passive
Tweeter
1x 1.75"/1.75"
Midrange
no
Frequency range
1.50kHz-20kHz
Power
70W RMS, 180W Peak
Impedance
4Ω
Sensitivity
108dB
Product Description
Ground Zero Competition GZCT 5000SPL-B Manual
The Ground Zero Competition GZCT 5000SPL-B is a purpose-built compression tweeter designed for serious sound pressure and clear high-frequency projection. Built for competition-style audio systems, it combines a compact horn-loaded design with high efficiency, making it a strong choice when detail and output both matter. The Ground Zero Competition GZCT 5000SPL-B Manual highlights a speaker that is engineered to deliver sharp, controlled treble without losing authority at high volume.
At the heart of the tweeter is an elliptical tractrix horn, which helps guide sound efficiently and widen the listening area. The titanium dome adds stiffness and responsiveness, supporting bright, precise top-end performance. Ground Zero also uses a glass-fiber reinforced ABS horn and a 44.5 mm copper-clad aluminium round wire voice coil, showing that durability and performance are both part of the design. These materials are chosen to handle demanding use while keeping distortion under control.
Performance figures make the GZCT 5000SPL-B especially appealing for SPL-oriented systems. It offers a frequency range from 1.5 kHz to 20 kHz, a 4-ohm impedance, and a striking 108 dB sensitivity at 1W/1m. With 70 watts RMS and 180 watts maximum power, it is built to deliver strong output with relatively little amplifier power. Its 90° x 60° dispersion helps direct the sound effectively, making it suitable for setups where projection and clarity are critical.
The unit’s size and mounting requirements should be considered carefully during planning. With overall dimensions of 200 x 150 mm, a mounting diameter of 165 x 130 mm, and a 142 mm mounting depth, this tweeter needs proper space and secure installation. In return, it offers a robust platform for high-output audio systems that demand both efficiency and precision.
Notes
- Best suited for competition or high-output audio builds.
- Installation should be planned around the tweeter’s depth and mounting size.
- Warranty coverage excludes damage from overload, misuse, or competition use.
- Always confirm system tuning and crossover settings before use.
Search for 67,706 Manuals online
Type-in Brand or Model