Manual.ly Logo

Grohe Eurodisc Cosmopolitan Manual

0.0 · 0 Ratings

PDF manual · 14 Pages

English

M: OA-GPT-5-NAN
page

/ 14

Loading...
ca60f7cddc3adff83fa5d6f0d90762147fb2 page 4
1
Anwendungsbereich:
Der Betrieb mit drucklosen Speichern (offenen
Warmwasserbereitern) ist nicht möglich.
Technische Daten
Zur Einhaltung der Geräuschwerte nach DIN 4109 ist bei
Ruhedrücken über 5 bar ein Druckminderer einzubauen.
Höhere Druckdifferenzen zwischen Kalt- und Warmwasser-
anschluss sind zu vermeiden!
D
Diese Technische Produktinformation ist
ausschließlich für den Installateur oder
eingewiesene Fachkräfte!
Bitte an den Benutzer weitergeben!
Fließdruck: min. 0,5 bar – empfohlen 1 – 5 bar
Betriebsdruck: max. 10 bar
Prüfdruck: 16 bar
Durchfluss bei 3 bar Fließdruck: ca. 5,8 l/min
Temperatur Warmwassereingang max. 80 °C
Empfohlen (Energieeinsparung): 60 °C
Installation:
Rohrleitungssystem vor und nach der Installation
gründlich spülen (DIN 1988/DIN EN 806 beachten)!
Funktion:
Anschlüsse auf Dichtheit und Armatur auf Funktion
prüfen. Vormontierter Temperaturbegrenzer im
Auslieferzustand nicht aktiv.
Mengenbegrenzung:
In Verbindung mit hydraulischen Durchlauferhitzern
ist eine Durchflussmengenbegrenzung nicht zu
empfehlen.
Wartung:
Alle Teile prüfen, reinigen, evtl. austauschen.
Bei Wartungsarbeiten Wasserzufuhr absperren!
Beim Einbau der Kartusche auf richtigen Sitz der
Dichtungen achten.
Verschraubung einschrauben und fest anziehen.
Ersatzteile: siehe Explosionsdarstellung
(* = Sonderzubehör)
Pflege: siehe Pflegeanleitung
Application:
Operation with unpressurised storage heaters is not possible.
Specifications
If static pressure exceeds 5 bar, a pressure-reducing valve
must be fitted.
Avoid major pressure differences between hot and cold water
supply.
GB
This technical product information is exclusively
for the installer or trained specialists.
Please pass these instructions on to the user.
Flow pressure: min. 0.5 bar – recommended 1 – 5 bar
Operating pressure: max. 10 bar
Test pressure: 16 bar
Flow rate at 3 bar flow pressure: approx. 5,8 l/min
Hot water inlet temperature max. 80 °C
Recommended (energy saving): 60 °C
Installation:
Flush piping system prior and after installation of
fitting thoroughly (Consider EN 806)!
Function:
Check connections for leaks and check function of
fitting. The preassembled temperature limiter is not
active in delivery condition.
Flow rate limitation:
The use of flow rate limiters in combination with
hydraulic instantaneous heaters is not recommended.
Maintenance:
Inspect and clean all components and replace if
necessary.
Shut off water supply for maintenance work.
When installing the cartridge, ensure that the
seals are correctly seated.
Screw in and tighten screwing.
Replacement parts: see exploded drawing
(* = special accessories)
Care: see Care Instructions
Domaine d'application:
Un fonctionnement avec des accumulateurs sans pression
(chauffe-eau à écoulement libre) n'est pas possible!
Caractéristiques techniques
Installer un réducteur de pression en cas de pressions
statiques supérieures à 5 bars.
Eviter les différences importantes de pression entre les
raccordements d'eau chaude et d'eau froide!
F
La documentation technique/produit est
exclusivement destinée aux plombiers et aux
personnels qualifiés.
Penser à la remettre à l’utilisateur.
Pression dynamique: minimale 0,5 bar –
recommandée 1 à 5 bars
Pression de service: 10 bars maxi.
Pression d'épreuve: 16 bars
Débit à une pression dynamique de 3 bars: env. 5,8 l/min
Température de l’eau chaude 80 °C maxi.
Recommandée (économie d'énergie): 60 °C
Installation
Bien rincer les canalisations avant et après
l’installation (respecter la norme EN 806)!
Fonctionnement
Contrôler l’étanchéité des raccordements et contrôler
le fonctionnement de la robinetterie. Le limiteur de
température prémonté n’est pas actif à la livraison.
Limiteur de débit
La limitation du débit est déconseillée avec des
chauffe-eau instantanés à commande hydraulique.
Maintenance
Contrôler et nettoyer toutes les pièces, les
remplacer le cas échéant.
Fermer les arrivées d’eau en cas de maintenance.
Contrôler le siège des joints lors du montage de la
cartouche.
Insérer la bague filetée et serrer jusqu'au blocage.
Pièces de rechange voir vue explosée
(* = accessoires spéciaux).
Entretien: voir les instructions d’entretien

Chat with your Grohe Eurodisc Cosmopolitan manual using AI

Get instant AI answers from your Grohe Eurodisc Cosmopolitan manual

Ask anything about the Grohe Eurodisc Cosmopolitan. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eurodisc Cosmopolitan?

Yes No

Frequently Asked Questions

A

No. The Grohe Eurodisc Cosmopolitan S-Size mixer is not suitable for use with non-pressurized (open) storage heaters. It requires a pressurized supply to operate correctly and safely.

Is this answer helpful?

A

Recommended dynamic flow pressure is 1–5 bar, with a minimum of 0.5 bar and a maximum operating pressure of 10 bar. If static pressure exceeds 5 bar, install a pressure-reducing valve to protect the installation and meet noise standards.

Is this answer helpful?

A

No. The manufacturer advises against using flow-rate limiters in combination with hydraulic instantaneous (flow) water heaters, as this can interfere with heater operation and cause performance issues.

Is this answer helpful?

A

Regularly inspect and clean components, replace worn parts as needed, and follow the Grohe care instructions for chrome finishes. Shut off the water supply before performing maintenance and ensure cartridge seals are seated correctly during reassembly.

Is this answer helpful?

A

Installers must flush the pipework thoroughly before and after installation in accordance with EN 806, check connections for leaks, verify faucet function, and ensure the preassembled temperature limiter is configured if required.

Is this answer helpful?

A

No. The preassembled temperature limiter is delivered in a deactivated state. Activation or adjustment should be performed by a qualified installer according to installation instructions.

Is this answer helpful?

A

Replacement parts and any special accessories are listed in the product's exploded diagram provided by Grohe. Consult that diagram or contact an authorized parts supplier for exact part numbers and compatibility.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact S-Size design fits small basins and modern bathrooms.
  • Remote waste control offers convenient operation without reaching into the basin.
  • Reliable performance across common household pressures (0.5–10 bar operating range).
  • Chrome finish is durable and easy to maintain with proper care.
  • Installer-focused design: preassembled limiter, clear maintenance and installation guidance.
VS

Disadvantages

  • Not compatible with non-pressurized (open) storage heaters.
  • Flow restrictors not recommended with hydraulic instantaneous water heaters.
  • Static pressures above 5 bar require a pressure-reducing valve (additional cost/installation).
  • Preassembled temperature limiter is delivered inactive, requiring installer setup.
  • Replacement parts or special accessories may be required and referenced separately.
M: OA-GPT-5-NAN

Product Specification

Material

Plastic, Metal

Color

chrome

Mounting type

Stand mounting, 1 hole

Height

8.07 in

Projection

4.57 in

Pitch

no

Spout

rigid

Operation

Single-lever mixer

Drain remote control

yes, integrated (chain)

Pressure

High pressure

Special features

Aerator jet

M: OA-GPT-54-NAN

Product Description

Grohe Eurodisc Cosmopolitan single-lever basin mixer S-Size with remote waste control chrome Manual

The Grohe Eurodisc Cosmopolitan single-lever basin mixer S-Size with remote waste control in chrome is a compact, modern faucet designed for everyday bathroom use. Combining clean lines and Grohe’s engineering, it’s built to deliver reliable performance while fitting smaller basins. The remote waste control adds convenience, enabling users to operate the waste trap without reaching into the basin. Chrome finish offers a bright, low-maintenance surface that pairs well with contemporary and transitional bathroom styles.

This mixer is engineered for durability and ease of installation. It supports typical domestic pressures (recommended 1–5 bar, minimum 0.5 bar, maximum operating pressure 10 bar) and yields around 5.8 L/min at 3 bar, balancing water savings and practical flow. The product includes features intended for professional installers: a preassembled temperature limiter (delivered inactive), required attention to seal placement when fitting the cartridge, and guidance to flush the pipework before and after installation in line with EN 806.

Materials and maintenance focus on longevity. The chrome surface resists tarnish and is simple to clean following the manufacturer’s care instructions. Maintenance guidance recommends checking all parts periodically, cleaning or replacing worn components, and shutting off the water supply before any servicing. For installations where static pressure exceeds 5 bar, a pressure-reducing valve is advised to protect the fitting and ensure quieter operation.

Safety and compatibility notes highlight that operation with non-pressurized (open) storage heaters is not supported and that large pressure differences between hot and cold connections should be avoided. Flow restrictors are not recommended when the mixer is used with hydraulic instantaneous water heaters. Replacement parts are referenced in the exploded diagram provided by Grohe, and special accessories may be identified separately.

Overall, the Eurodisc Cosmopolitan S-Size mixer is suitable for users seeking a compact, reliable basin tap with modern styling and installer-focused technical details. Its remote waste control and Grohe quality engineering make it a convenient choice for small bathrooms, en-suites, or powder rooms.

Notes

  • Adhere to EN 806 when flushing piping before and after installation.
  • Install a pressure reducer if static pressure exceeds 5 bar.
  • Preassembled temperature limiter arrives deactivated; activation/settings require installer action.
  • Flow restrictors should be avoided with hydraulic instantaneous heaters.
  • Follow Grohe care instructions for chrome finish longevity.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly