Manual.ly Logo

Gravity MS 231 HB Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
33e12160f738b846c76e5e78bcb9b62934e1 page 1
Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 81 · 94 19-0
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have
it recycled to promote sustainable economic activity.
CAUTION: If the brake shoes are not used for a long time, they can stick to the
inside of the tube. Please loosen the clamps before storing (pull off the upper
tube and loosen the hexagon nut a little). Alternatively, fix the operating lever
of the tripod with a cable tie or similar in the pressed position.
MS 231 HB
MICROPHONE STAND WITH ROUND BASE
AND ONEHAND CLUTCH
FEATURES
• Straight microphone stand with heavy-duty base
• Fast and convenient single-handed height adjustment
• Durable, rugged design
• Max. height 175 cm, min. height 108 cm
• Additional weight disc as accessory (article no. GMS2WP)
DESCRIPTION
The GMS 231 HB is a premium-quality microphone stand with thick walled tubing,
black powder-coated finish and 175 cm maximum height. The exceptionally
stable round base is made of heavy-duty cast iron, while a rubber ring on the
bottom ensures acoustic isolation and surface protection.
The GMS 231 HB features a new and especially convenient single-handed
height adjustment function fitted with a non-slip ergonomic handle that
makes it very easy to use at all times. The custom-designed retainer requires
no tools for quick and secure microphone clip attachment.
VARIWEIGHT
®
compatible – patented stability system for secure holding and
simple transportation by means of an insertable weight disc.
An additional set of black coding rings is included with the GMS 231 HB; more
ring packs are available in a wide array of colours for clear personalization.
For increased stability, a 2.3 kg weight disc is available as an accessory
(article no. GWS2WP) that is easy to assemble without tools.
Product number GMS231HB
Product type Stands and Tripods
Type Microphone Stands
Tubing material Steel
Tubing colour Black
Tubing surface Powder coated
Min. height 1080 mm
Max. height 1750 mm
Transport length 1080 mm
Height adjustment Yes
Base type Round base
Base material Cast iron
Base diameter 270 mm
Base weight 3.6 kg
Interchangeable rings 1 x 20 mm
Black ring pack included Yes
Weight 4.4 kg
SPECIFICATIONS

Chat with your Gravity MS 231 HB manual using AI

Get instant AI answers from your Gravity MS 231 HB manual

Ask anything about the Gravity MS 231 HB. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend MS 231 HB?

Yes No

Frequently Asked Questions

A

The Gravity MS 231 HB extends to a maximum height of 175 cm, making it suitable for most standard microphone applications while remaining compact enough for transport.

Is this answer helpful?

A

No, this product is strictly designed for indoor use. Using it outdoors may lead to product failure due to weather exposure and could result in personal injury.

Is this answer helpful?

A

The stand includes a set of black coding rings but does not include the weight disc. The 2.3 kg weight disc is available as a separate accessory for increased stability.

Is this answer helpful?

A

You can adjust the height using the convenient single-handed lever with a non-slip ergonomic handle. It allows for fast and secure changes without requiring tools.

Is this answer helpful?

A

The base is constructed from heavy-duty cast iron, which provides a solid, stable platform. It also features a rubber ring to protect surfaces and isolate sound.

Is this answer helpful?

A

If storing for a long time, loosen the clamps by pulling off the upper tube and slightly loosening the hexagon nut to prevent the brake shoes from sticking to the tube.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Single-handed ergonomic height adjustment for quick setup changes
  • Heavy-duty cast iron base provides exceptional stability and floor protection
  • Compatible with VARIWEIGHT system for enhanced security during transport
  • Durable steel tubing with black powder-coated finish resists wear and tear
  • Includes interchangeable coding rings for easy personalization
VS

Disadvantages

  • Intended for indoor use only, limiting outdoor deployment options
  • Brake shoes may stick to the tube if not loosened before long-term storage
  • Additional weight disc must be purchased separately for maximum stability
  • Total weight of 4.4 kg may be heavy for some portable setups
  • Height adjustment requires manual operation without motorized assistance
M: QW-35-FL

Product Specification

Type

Straight floor stand

Material

Cast iron, steel

Foot construction

Round base

Thread

5/8"

Height

42.5-68.9 inches

Features

One-hand height adjustment

Color

Black

Weight

9.7 lbs

M: QW-35-FL

Product Description

Elevate Your Audio Setup with the Gravity MS 231 HB

The Gravity MS 231 HB stands as a pinnacle of engineering in the world of audio equipment, designed specifically for professionals who demand reliability and ease of use. This premium microphone stand features a robust construction that combines thick-walled steel tubing with a sleek black powder-coated finish, ensuring it looks as professional as it performs. Whether you are setting up for a live concert, a studio recording session, or a public speaking event, this stand offers the stability and durability required to handle demanding environments.

One of the standout features of the Gravity MS 231 HB is its innovative single-handed height adjustment mechanism. Equipped with a non-slip ergonomic handle, users can quickly raise or lower the stand from a minimum height of 108 cm to a maximum of 175 cm without needing a second hand or additional tools. This convenience allows performers and sound engineers to make rapid adjustments on the fly, keeping the workflow smooth and uninterrupted. The custom-designed retainer ensures that microphone clips attach securely and quickly, further enhancing the user experience.

Stability is paramount when dealing with expensive microphones and sensitive equipment. The base of the MS 231 HB is crafted from heavy-duty cast iron, providing a solid foundation that prevents tipping. A rubber ring at the bottom adds acoustic isolation and protects floors from scratches. For added security, the stand is compatible with the patented VARIWEIGHT system, allowing users to insert an optional 2.3 kg weight disc for increased resistance against accidental bumps. Additionally, the inclusion of black coding rings offers a touch of personalization, with more color options available to match any aesthetic preference.

Constructed with care, the Gravity MS 231 HB adheres to strict safety guidelines and is intended for indoor use only. Proper disposal instructions ensure environmental responsibility, separating electronic waste from household trash. With a total weight of 4.4 kg and a transport length of 108 cm, it balances portability with the heft needed for performance. This product represents a commitment to quality, merging functional design with rugged longevity to meet the needs of modern audio professionals.

Important Notes

  • Always store the stand with the brake shoes loosened to prevent sticking during long periods of inactivity.
  • Ensure all applicable local laws regarding electronic waste disposal are followed when retiring the unit.
  • Use the optional weight disc if operating in high-traffic areas to maximize stability.
M: QW-35-FL

© Copyright 2026 Manual.ly