Manual.ly Logo

Gravity LS TBTV Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
3a96591e3f2532cb4dce526764d07dd5bdd6 page 1
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to
promote sustainable economic activity.
FEATURES
Solid and durable tripod construction
Ultra-strong steel tubing
Heavy-duty die-cast aluminium leg collar
Dual extensions
INTRODUCTION
The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from
thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium
leg collar has been completely redesigned to provide superior durability and
longevity. The unbreakable height adjustment collars are made of steel for
additional strength and feature safety pins to securely lock the extensions in
place. The ergonomic set screw knobs are made from high grade ABS with a
so touch, non-slip thermoplastic coating for comfortable handling. The stand
includes a T-Bar with an ergonomically formed and rubberized T-joint – making
the T-Bar not only easier to handle and carry but also look better looking than
regular stands.
SPECIFICATIONS
Product type: Stands and Tripods
Type: Lighting Stands
Stand material: steel
Truss material: steel
Stand surface: powder coated
Crossbar surface: powder coated
Stand colour: Black
Number of extensions: 2
Min. height: 1450 mm
Max height: 3250 mm
Transport length: 1450 mm
Max. load: 50 kg
Holding xture for TV Spigot: yes
TV spigot: 28 mm
Crossbar length: 1220 mm
Weight: 9,2 kg
GLSTBTV28
Lighting stand with T-Bar, large

Chat with your Gravity LS TBTV manual using AI

Get instant AI answers from your Gravity LS TBTV manual

Ask anything about the Gravity LS TBTV. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend LS TBTV?

Yes No

Frequently Asked Questions

A

The stand can extend to a maximum height of 2500 mm. The minimum height is 1100 mm. It features two extensions for flexibility.

Is this answer helpful?

A

The stand and truss material is steel. The surface is powder coated in black for durability and protection against corrosion.

Is this answer helpful?

A

No. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury risks.

Is this answer helpful?

A

The stand supports a maximum load of 30 kg. Ensure you do not exceed this weight limit for safety.

Is this answer helpful?

A

The unbreakable height adjustment collars are made of steel. They lock the extensions in place securely. Use the ergonomic knobs.

Is this answer helpful?

A

Yes. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint for easier handling.

Is this answer helpful?

A

The manufacturer is Adam Hall GmbH located in Germany. Contact details are available for warranty claims and support.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Solid and durable tripod construction from thick steel tubing
  • Ultra-strong steel tubing ensures longevity
  • Ergonomic set screw knobs with soft touch coating
  • Included T-Bar with rubberised T-Joint for ease
  • Heavy-duty die-cast aluminum leg collar
VS

Disadvantages

  • Intended for indoor use only
  • Outdoor use leads to potential product failure
  • Maximum load limit is 30 kg only
  • Weight of 5.698 kg requires transport
  • Requires careful reading of safety instructions
M: QW-35-FL

Product Specification

Material

Aluminum

M: QW-35-FL

Product Description

Professional Lighting Support System

Are you looking for a reliable lighting stand for your next professional event? The Gravity LS TBTV product line offers exceptional stability and performance for users. This lighting stand is a key component of the Adam Hall Group portfolio. It utilizes ultra-strong steel tubing for consistent support during complex setups. The design focuses on maximum durability without adding excessive weight to the operator during transport.

Construction Quality

Users often rely on the heavy-duty die-cast aluminum leg collar for superior longevity in demanding environments. The structure features thick walled but lightweight powder coated steel tubing that resists corrosion. This ensures the stand can withstand rigorous use over many years of service. The unbreakable height adjustment collars are made of steel for additional strength and security. They securely lock the extensions in place quickly during operation.

User Experience and Design

Handling equipment should always be ergonomic and safe for the technicians involved. The ergonomic set screw knobs are made from high grade ABS plastic for strength. They have a soft touch non-slip thermo plastic coating for comfortable handling during adjustments. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint included. This makes the T-Bar not only easier to handle and carry but also better looking than regular stands found in the industry.

Performance Specifications

The GLSTBTV17 model supports a maximum load of 30 kg for heavy fixtures safely. Height ranges from 1100 mm minimum to 2500 mm maximum for flexibility. It features two extensions for flexible positioning to suit various room sizes. The television spigot is 17 mm for standard fixture compatibility with most lights. A crossbar length of 950 mm provides excellent stability across the base. The unit weighs 5.698 kg for transport convenience and ease.

Safety and Operational Use

Always read the Gravity LS TBTV Leuchtenstativ Manual carefully before assembly. Follow all instructions before starting setup to ensure safety compliance. This product is intended for indoor use only due to weather risks. Outdoor use could lead to product failure and personal injury risks. Keep safety warnings visible and do not modify equipment structure. Contact your local distributor for additional support if needed during troubleshooting.

Brand Reliability

Gravity is a registered brand of the Adam Hall Group with a strong reputation. Their facilities are located in Germany ensuring quality control standards. The warranty conditions are available on their secure online portal for review. Limitation of liability is defined clearly in the official documentation available. Users can find contact details at the Adam Hall GmbH address in Neu Anspach. This ensures accountability and support for all customers worldwide.

Maintenance and Warranty Details

Dispose of the product in compliance with local laws for electronics. Contact Adam Hall GmbH for warranty claims and service requests. The material surface is powder coated for better appearance and rust resistance. This product ensures sustainability through proper disposal methods used globally. Recycle the unit to promote sustainable economic activity and reduce waste.

M: QW-35-FL

© Copyright 2026 Manual.ly