Manual.ly Logo

Gloria Pro Manual

0.0 · 0 Ratings

PDF manual · 66 Pages

English

M: QW-35-FL
page

/ 66

Loading...
baa9995eb3428d421830f9a230eb1d74051a page a
12
Assembly of carrying strap PRO 8
G Fig. E
Operation
G Remove the pump by turning it to
the left. Before doing this release
pump rods, turn them 180° and
transmit the srew force via the back
of the zwistlocks on the pump hous-
ing.
G Filling of the container. Attention!
Max. liquid capacity (see technical
data) and the correct dosage of the
chemicals manufacturer have to be
observed.
G Re-insert pump and tighten.
G Operate pump until a working pres-
sure of 3 bars is reached.
The maximum operating has been
reached in the case of units without
a pressure gauge when the built-in
safety valve audibly begins to blow
off.
G For spraying press down the opera-
tion lever at the valve body. When
releasing the lever the output will be
interrupted.
Emptying and
Service
G Any residual pressure in the tank
can be vented by lifting up the knob
on the safety valve (only for PRO 5/8
spray units). In the case of the
STRATOS 5 unit, the pressure is re-
leased by the quick-action valve
when the handle is operated. If there
is still some of the spraying liquid in-
side the tank, turn the unit upside
down and then press the handle.
G The pomp will be carefully, at first
only a few turns by lefthand rotation
screwed off, so that the compressed
air being still in the tank can deflate.
G After use clear apparatus carefully
and dry it in open state.
G The working life will be extended
when greasing the washers and col-
lars sometimes. Only use resin- and
acid-free grease.
G For easy cleaning and safe neu-
tralization of remaining
liquid is recommended to use
GLORIA special powder,
art.-no. 263.0000.
G Important! Above-average use due
to manner of operating (including
the tranport to the place of operation
and the storage when not using the
sprayer), influences of the surround

Chat with your Gloria Pro manual using AI

Get instant AI answers from your Gloria Pro manual

Ask anything about the Gloria Pro. Answers come from this manual, with the pages they are based on.

Pro Maintenance Schedule

Remind me when maintenance is due
Every 2 years
Professional safety inspection

Have the pressure sprayer subjected to a thorough inspection by an expert or manufacturer service station to ensure safe operation continues.

After every use
Clean and dry the device thoroughly

Clean the tank immediately after use with lukewarm water or GLORIA special active carbon powder. Leave the device open to dry completely.

Occasionally
Lubricate seals and collars

Grease washers, O-rings, and collars from time to time using resin- and acid-free grease to extend the device's working life.

Show in the manual (page 10)
Before each use
Inspect for damage and leaks

Check that screw connections are tight and inspect material for cracks, brittleness, and corrosion before operating the sprayer.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Pro?

Yes No

Frequently Asked Questions

A

The maximum allowable working pressure for all models, including the PRO 5, PRO 8, and Airstar Stratos 5, is 3 bar. Exceeding this limit can compromise safety.

Is this answer helpful?

A

No, you should only use pure, commercially available products. Mixing different chemicals can cause dangerous, unpredictable reactions. Avoid acidic substances with a pH of 5 or lower.

Is this answer helpful?

A

It is recommended to have the sprayer inspected thoroughly every two years by an expert or the manufacturer's service center to ensure safe operation.

Is this answer helpful?

A

Yes, the Gloria Pro Druckger series is specifically designed to be oil-resistant, making it suitable for spraying oils and similar aggressive liquids.

Is this answer helpful?

A

Yes, spray tube extensions up to 1 meter in length can be used to increase your reach and coverage area effectively.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Oil-resistant design suitable for harsh chemicals and industrial use
  • Adjustable hollow cone nozzle with spray angles from 0 to 60 degrees
  • Safe operating pressure limit of 3 bar with built-in safety valves
  • Supports spray tube extensions up to 1 meter for extended reach
  • Durable construction compliant with European pressure equipment directives
VS

Disadvantages

  • Requires manual assembly of the pump and hose connections
  • No manometer included on PRO 5 and PRO 8 models for pressure monitoring
  • Maintenance requires specific resin-free grease for optimal longevity
  • Strict safety protocols needed regarding chemical compatibility and pH levels
  • Must be inspected thoroughly every two years by authorized service centers
M: QW-35-FL

Product Description

Gloria Pro Druckger: The Ultimate Spraying Solution for Professionals and Hobbyists

Discover the power and precision of the Gloria Pro Druckger, a high-performance pressure sprayer designed to meet the demanding needs of hobbyists, craftsmen, and industrial users. This robust equipment is engineered for versatility, allowing you to apply liquids with exceptional control across a wide range of applications in home, garden, and professional settings.

The Gloria Pro Druckger stands out for its oil-resistant construction, ensuring durability even when handling aggressive substances. Whether you are treating crops, applying protective coatings, or managing industrial fluids, this device delivers consistent results. Its intelligent design features a hollow cone nozzle that offers an adjustable spray angle from 0 to 60 degrees, giving you the flexibility to choose between a fine mist or a targeted stream. The system operates at a safe working pressure of up to 3 bar, maximizing efficiency while maintaining user safety.

Safety is paramount with the Gloria Pro Druckger. Equipped with a reliable safety valve and, on specific models, a manometer, it ensures that pressure levels remain within optimal limits. The device includes a venting mechanism to release residual pressure safely before maintenance. For added convenience, the unit supports spray tube extensions up to one meter, allowing you to reach difficult areas without compromising stability. The ergonomic carrying strap makes transport effortless, whether you are moving between garden plots or navigating a workshop.

Maintenance is straightforward, contributing to the long lifespan of the device. Regular cleaning and occasional lubrication of seals with resin-free grease keep the pump running smoothly. The manufacturer recommends using special activated carbon for deep neutralization and cleaning after every use. It is crucial to follow all safety guidelines, such as avoiding mixing incompatible chemicals and never exposing the filled tank to direct sunlight or temperatures exceeding 40 degrees Celsius. With proper care, the Gloria Pro Druckger remains a reliable partner for years of heavy-duty performance.

M: QW-35-FL

© Copyright 2026 Manual.ly