Manual.ly Logo

Gloria FineCut 18V Manual

0.0 · 0 Ratings

PDF manual · 180 Pages

English

M: QW-35-FL
page

/ 180

Loading...
fb781919608f36c0b5cf24f2ea973e294fdc page 20
32
Before inserting the new blade set, check
the correct position of the upper blades.
The upper blades need to be positioned
centrally and pointing straight forward as
shown. You may need to align the cams of
the upper blades as shown in the figure.
( = correct / = incorrect).
Now attach the new blade set. The central
large stud and the 3 indicated shafts of
the cog wheels, which need to sit in the
openings of the blade set, can be used as
a positioning aid.
Fix the blade set by screwing it at the
position indicated.
Replace the base cover on the device
as shown.
Then use the 7 screws indicated to
screw the base cover in place.
Lubricate the new blade with machine oil
or lubricating oil spray before using.
The blade set has now been replaced.
9.2 Cleaning
ATTENTION
Improper use of the device poses a risk
of damage to property! You should
therefore observe the following safety
instruction:
Remove the battery each time
before cleaning the device.
Do not immerse the device in water
or spray or clean it with water.
The device must be protected
against moisture.
Clean the outside of the device with
a damp cloth or soft brush. Do not
use abrasives or harsh cleaning
agents.
Dismantle the grass trimmer for a
thorough clean if it is seriously dirty.
Use a brush to clean the cutting unit,
the housing and the two seals, then
oil the blades (J).
Only use original GLORIA spare parts
for repairs.
Further accessories can be found at
https://shop.gloria-garten.com/de/.
10 Decommissioning & Storage
10.1 Decommissioning
Take the device out of operation by releas-
ing the On/Off switch (E) in the handle.
10.1.1 Removing the rechargeable
battery
Figure 27
ATTENTION
Improper use of the device poses a risk
of damage to property! You should
therefore observe the following safety
instruction:
To prevent battery discharge, remove
the battery from the device when not in
use for a prolonged time.
10.2 Storage
Figures 28-29
CAUTION
You may be exposed to hazards that could
injure you when handling the device.
You must therefore store the device
away from children.
Remove any dirt and debris.
Slide the blade guard (K) onto the
blades (J).
Store the device hung up, dry and pro-
tected from frost.
10.2.1 Correct battery and charger
storage
It is essential that you also follow the
“Safety instructions for handling
charger and battery” in chapter
“Important safety instructions”.
ATTENTION
Improper use of the device poses a risk
of damage to property.
The battery
should not be stored uncharged. Though
self discharge is minimal, an empty bat-
tery can be destroyed if stored for an
extended period. Thus, observe the fol-
lowing instructions if not in use for an
extended period (e.g. during winter):
store battery at a charge status of
approx. 40 - 60 %.
22
23
24
25
26
27
28
29
GB
RZ_FineCut18V.qxp_Text_GB 06.02.23 19:42 Seite 32

Chat with your Gloria FineCut 18V manual using AI

Get instant AI answers from your Gloria FineCut 18V manual

Ask anything about the Gloria FineCut 18V. Answers come from this manual, with the pages they are based on.

FineCut 18V Maintenance Schedule

Remind me when maintenance is due
Every 6 Months
Check battery charge level

If the battery has not been used for more than 6 months, check its status on the charger and recharge to 40-60% if needed.

Show in the manual (page 32)
Before/After Each Use
Clean the grass trimmer

Remove dirt and debris from the device before or after each use. Do not immerse in water; use a damp cloth or soft brush.

Show in the manual (page 30)
Before/After Each Use
Oil the blades

Lubricate the blades with machine oil or spray lubricating oil before or after use to ensure proper operation.

Show in the manual (page 30)
Hourly During Use
Re-oil blades during operation

If cutting for extended periods, oil the blades at least once per hour with machine oil or spray lubricant.

Show in the manual (page 30)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend FineCut 18V?

Yes No

Frequently Asked Questions

A

No, you should charge the battery only indoors in a dry room. Operating the charger outdoors exposes it to rain and moisture which can cause damage or safety hazards.

Is this answer helpful?

A

The battery runtime depends on the capacity used. A 2.5 Ah battery lasts about 60 minutes while a 4.0 Ah battery provides approximately 95 minutes of continuous operation.

Is this answer helpful?

A

If the temperature exceeds 60 degrees Celsius, the device switches off automatically to protect the battery and motor. Allow the unit to cool down before restarting.

Is this answer helpful?

A

You should oil the blades at least once per hour during use to maintain sharpness. This reduces friction and ensures efficient cutting performance throughout the job.

Is this answer helpful?

A

No, this machine is designed exclusively for cutting grass. Cutting branches or other materials can damage the blade tension and ruin the cut quality.

Is this answer helpful?

A

Store the battery at a charge level between 40 and 60 percent. Keep it in a dry place with a temperature between 0 and 45 degrees Celsius to preserve life.

Is this answer helpful?

A

Warranty terms vary by region. Check with your local authorized dealer or the official website for specific coverage details applicable in your country.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Cordless operation with 18V lithium battery for mobility
  • Adjustable cutting height from 30 to 50mm for versatility
  • Ergonomic handle reduces operator fatigue during use
  • Built-in battery status indicator LEDs for monitoring
  • Angle adjustment capability for hard to reach areas
VS

Disadvantages

  • Battery and charger not included in all versions
  • Cannot cut grass that is wet or during rainy weather
  • Blade protection guard required for safety compliance
  • Maximum cut width is limited to 250 mm
  • Requires regular lubrication for optimal performance
M: QW-35-FL

Product Specification

Type

Grass Shear

Cutting Width

9.84 in

Weight

5.95 lb

M: QW-35-FL

Product Description

Enhance Your Lawn Edging with the Gloria FineCut 18V Cordless Grass Shears Manual

Gardening tasks demand efficient tools that simplify edge trimming around your property boundaries effectively. The Gloria FineCut 18V Cordless Grass Shears Manual offers detailed guidance for homeowners seeking precision results efficiently in their own yard spaces. This electric device operates on a rechargeable battery system ensuring complete mobility across yards without tangled cords or wires. Unlike petrol models, there is no fuel mixing involved which reduces harmful emissions significantly for the overall environment safety. The ergonomic grip minimizes hand strain during prolonged landscaping projects requiring steady hands for best control. Users appreciate the lightweight construction allowing easy handling around garden furniture and delicate plants safely without accidents. The manual covers assembly steps clearly so initial setup is quick and secure for beginners to follow. Electrical contacts align automatically during tube connection preventing potential wiring errors during complex installation procedures. Power delivery remains consistent throughout the mowing session due to intelligent voltage management systems within the motor housing.

Technical specs highlight a cutting width of 250 millimeters for wider pathway processing tasks. Height adjustment options provide three distinct settings for custom lawn border designs easily adjusted by wheels. The maximum stroke rate reaches one thousand one hundred per minute for fast effective work on thick grass. Troubleshooting tables in the manual address blockages or charging failures quickly and efficiently when problems occur. Users can replace blades using standard screwdrivers found in the kit box included with every purchase. Variations exist regarding package contents such as bundled chargers or standalone units purchased separately depending on needs. Always verify item numbers when ordering spare parts online or visiting physical stores regularly for authenticity. Warranty periods typically cover defects arising from normal usage patterns over time effectively for consumer confidence. Proper care prevents unnecessary repairs extending the operational lifespan considerably for everyone involved in maintaining lawns. Regular checks on cables and plugs ensure safe electrical connections remain intact always during active operation.

Safety protocols are critical for protecting yourself and others while using the equipment. Lubricate blades frequently to reduce friction and extend the sharpness of cutting edges significantly. Oil the gears monthly to keep mechanical parts moving smoothly under heavy load conditions consistently. If the device stops working unexpectedly, check the battery charge level first before assuming mechanical failure occurs. Allow cooling time if thermal sensors detect high internal temperatures blocking further discharge attempts immediately. Dispose of old batteries at designated centers rather than throwing them into regular household trash bins. Recycle packaging materials to support environmental conservation efforts mandated by local laws and regulations globally. Consult the manufacturer website for updates regarding software changes or recall notices affecting your specific unit version.

M: QW-35-FL

© Copyright 2026 Manual.ly