Manual.ly Logo

Gastroback 40983 Design Pro Manual

4.5 · 2 Ratings

PDF manual · 80 Pages

English

M: OA-GPT-5-NAN
page

/ 80

Loading...
67ce2932527dc7a845d278be33203e236157 page 5
5
WICHTIGE SICHERHEITSHINWEISE
Lesen Sie bitte alle Hinweise und Anleitungen, die mit dem
Gerät geliefert werden, sorgfältig und vollständig durch und
bewahren Sie die Anleitungen gut auf. Verwenden Sie das Gerät aus-
schließlich für den Zweck und in der Weise, die in diesen Anleitungen
beschrieben werden (bestimmungsgemäßer Gebrauch). Führen Sie keine
Arbeiten am Gerät durch, die in diesen Anleitungen nicht beschrieben
werden. Ein bestimmungswidriger Gebrauch und besonders Missbrauch
können zu Sachschäden sowie zu schweren Personenschäden durch
gefährliche elektrische Spannung, bewegliche Bauteile, Überhitzung und
Feuer führen. Lassen Sie das Gerät niemals unbeaufsichtigt, wenn der
Motorblock an die Stromversorgung angeschlossen ist.
Diese Anleitung ist ein wichtiger Bestandteil des Gerätes. Geben Sie das
Gerät nicht ohne diese Anleitung an Dritte weiter. Reparaturen und tech-
nische Wartung am Gerät oder Netzkabel dürfen nur von dafür autori-
sierten Fachwerkstätten durchgeführt werden (siehe: ‚Gewährleistung /
Garantie‘).
Fragen zum Gerät beantwortet: Gastroback GmbH, Gewerbestr. 20,
D-21279 Hollenstedt, Telefon: (04165) 22250.
ALLGEMEINE HINWEISE ZUR SICHERHEIT
• Dieses Gerät ist nur für den Betrieb in Innenräumen und für die Ver-
wendung im Haushalt vorgesehen. Verwenden und lagern Sie das
Gerät nicht im Freien oder in feuchten oder nassen Bereichen. Ver-
wenden Sie das Gerät nicht in Booten oder fahrenden Fahrzeugen.
Verwenden Sie nur Bauteile, Zubehöre und Ersatzteile für das Gerät,
die vom Hersteller für diesen Zweck vorgesehen und empfohlen
sind. Beschädigte oder ungeeignete Bauteile und Zubehöre (Bei-
spiel: Drahtwerkzeuge, Pürierstab, Hackmesser) können während des
Betriebes brechen, schmelzen, sich lösen oder verformen und zur
Überhitzung oder Gefährdung durch Elektrizität und bewegliche Bau-
teile führen und dadurch Sachschäden und schwere Personenschäden
verursachen.
• Überprüfen Sie regelmäßig die Bauteile und Zubehöre sowie das Netz-
kabel des Gerätes auf Beschädigungen (Beispiel: Verformung, Brüche,

Chat with your Gastroback 40983 Design Pro manual using AI

Get instant AI answers from your Gastroback 40983 Design Pro manual

Ask anything about the Gastroback 40983 Design Pro. Answers come from this manual, with the pages they are based on.

40983 Design Pro Maintenance Schedule

After every use
Clean accessories immediately

Clean wire tools, bar blender, and chopper system immediately after use to prevent food from drying. Do not leave food in containers.

Show in the manual (page 34)
Every few months
Inspect parts for damage

Check the entire appliance regularly for distortion, cracks, broken parts, or improper operation before each use.

Show in the manual (page 47)
Yearly
Service by authorized center

Repairs and technical maintenance must be performed only by an authorized service center if faults occur or as recommended.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend 40983 Design Pro?

Yes No
0
User Pic

Simone Schober

8 months ago

Does this hand mixer come with a long power cord and substantial accessories like a whisk and dough hooks, or is it mostly plastic?

0
User Pic

Manual.ly

8 months ago

Based on customer feedback, the hand mixer has a metal housing and a long 1.40 m power cord. It also includes robust metal mixing attachments, such as a whisk and dough hooks. Reviewers specifically noted that other hand mixers often come with shorter cables and more plastic parts, so this one feels more durable. A knife/chopper attachment may also be included, but some buyers do not use it. Overall, users consider it well-equipped and recommend buying it again.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The handmixer includes a pair of beaters, a pair of dough hooks, a whisk, a bar blender (pürierstab) with blender cup and lid, and a chopper system (hackkrug) with lid and chopper blade.

Is this answer helpful?

A

Set the function switch to M and hold the pulse button while keeping the tool immersed in food. Never use the blender or wire tools inside the chopper jug, avoid hot or highly alcoholic liquids, and observe the maximum continuous run times.

Is this answer helpful?

A

Wire tools (beaters/whisk/dough hooks): 10 minutes; bar blender: 1 minute; chopper system: 15 seconds. Allow the motor to cool to room temperature after these limits to prevent overload.

Is this answer helpful?

A

Unplug the appliance, check for obstructions or overloaded conditions, remove large pieces or reduce batch size, and if the overload protector activated, wait at least 30 minutes for the motor to cool before resuming.

Is this answer helpful?

A

No. The motor unit and power cord must never be immersed or placed in a dishwasher. Wipe the motor block with a damp, not dripping cloth and dry thoroughly; clean accessories per the manual's hand-wash instructions.

Is this answer helpful?

A

No. Accessories (blender cup and chopper jug) are limited to 60°C; avoid processing hot liquids to prevent steam damage and motor failure.

Is this answer helpful?

A

Do not process very hard ingredients (nuts, hard chocolate, kernels) or highly alcoholic/flammable liquids; avoid heavy bread doughs that exceed the mixer's kneading capacity.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Versatile: mixes, whips, purées, chops and kneads light doughs with multiple dedicated accessories.
  • Powerful yet compact: 500 W motor with stainless-steel housing and dedicated drive couplings.
  • Safety features: overload protection, clear locking/ejection mechanisms and detailed operating limits.
  • Variable control: five speed settings plus pulse/turbo for precise results with wire tools.
  • Convenient accessories: chopper jug, bar blender, blender cup and matched pairs of wire tools included.
VS

Disadvantages

  • Limited continuous run times: short maximum durations for bar blender (1 min) and chopper (15 s).
  • Not suitable for very hard ingredients: cannot process nuts, hard chocolate, seeds or heavy bread doughs.
  • Chopper jug not for liquids: liquid processing can leak and must be avoided with that accessory.
  • Motor unit must never be immersed or dishwasher-cleaned; cleaning requires careful manual steps.
  • Household-only: not designed for commercial use or operation in vehicles or outdoors.
M: OA-GPT-5-NAN

Product Specification

Operating Mode

Mains operation (500W)

Color

black, stainless steel

Speed Settings

5 speed settings, turbo stage

Material

Plastic (bowl), Stainless steel (blending foot)

Display

no

Special Features

removable parts dishwasher-safe

Scope of delivery

Mixing container, Chopper attachment, Whisk, Stirrer, Dough hooks, Immersion blender attachment

M: OA-GPT-54-NAN

Product Description

Gastroback 40983 Design Pro Handmixer Manual

The Gastroback 40983 Design Pro Handmixer is a versatile kitchen companion designed for everyday home cooking. With a stainless-steel motor housing, five speed levels plus a pulse/turbo function, and multiple accessories—beaters, dough hooks, a whisk, a bar blender, a chopper jug with blade and a blending cup—this handmixer handles mixing, whipping, puréeing and chopping tasks with ease. It is intended for household use and covers a wide range of food prep: whipping egg whites and cream, mixing batters, kneading light doughs, puréeing soups and vegetables, chopping herbs and meat, and grinding softer ingredients.

Key features and use

The motor delivers up to 500 W and supports different tools via dedicated drive couplings. Wire tools (beaters, dough hooks, whisk) use selectable speeds 1–5; the bar blender and chopper system operate with the pulse button while the function switch is set to M. Max continuous run times are specified to protect the motor: 10 minutes for wire tools, 1 minute for the bar blender, and 15 seconds for the chopper; an automatic overload protector halts the motor if overheated.

Accessories are purpose-built: do not mix tool types or use the bar blender inside the chopper jug. The chopper jug has a MAX mark and is unsuitable for liquids; the blender cup and chopper jug are heat-limited to 60°C. The pulse function temporarily boosts speed for tougher tasks; when using high-speed tools, users must hold the pulse button to run the motor.

Safety and operation essentials

Read all safety instructions before use. Always switch to 0 and unplug before fitting or removing accessories, cleaning, or storing. Keep the motor unit dry and away from hot or wet surfaces. Do not process very hard or highly alcoholic or flammable ingredients. Ensure proper installation of matching pairs of wire tools; the unit includes clear guidance for installing and ejecting tools, mounting the bar blender, and locking the motor onto the chopper lid.

To avoid motor damage, work in short pulses for demanding jobs, cut large or hard pieces into small (≈2 cm) portions, avoid overfilling containers, and choose appropriate speeds. If the overload protector trips, unplug, remove the cause, and allow the motor to cool (~30 minutes) before reuse.

Cleaning and maintenance

Remove accessories immediately after use and clean per instructions: a warm (≤60°C) soapy rinse method is described for wire tools and the bar blender; the chopper system requires careful hand-brushing and drying. Never immerse the motor unit in water or dishwasher. Store the device and parts in a dry, frost-free place out of reach of children.

Notes

  • Maximum continuous operation limits must be observed to prevent overheating.
  • Do not attempt repairs; authorized service only.
  • The appliance is for household use only and not intended for commercial or mobile applications.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly