Manual.ly Logo

G3 Ferrari Sfume G30043 Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 28

Loading...
9bb36469307b651517ae3dc201efe23965d2 page 8
7
In ogni caso è consigliabile esaurire completamente la batteria prima di procedere a una ricarica.
Se l’apparecchio, anche in seguito ad una ricarica, funziona soltanto se è connesso all’adattatore è possibile
che la batteria non sia più in grado di erogare potenza all’apparecchio. In tal caso contattare un centro
assistenza autorizzato.
INFORMATIVA SULLA RIMOZIONE E LO SMALTIMENTO DELLE BATTERIE
Attenzione: l’operazione di rimozione e smaltimento è riservata esclusivamente al
personale tecnico specializzato!
Per rimuovere la batteria:
- con un oggetto sottile, rimuovere l’estetica nera dei comandi.
- rimuovere le due viti dove prima c’era l’estetica e quella nella parte inferiore sotto all’etichetta tecnica.
- separare le plastiche del mobile, rimuovere la vite del circuito elettrico, scollegare e rimuovere la batteria
Qualunque sia il tipo di batteria esaurita, essa non deve essere gettata tra i rifiuti domestici,nel fuoco o
nell’acqua. Ogni tipo di batteria esaurita deve essere riciclata oppure smaltita presso gli appositi centri
raccolta dedicati.
MANUTENZIONE E PULIZIA
Staccare la spina dalla presa elettrica prima di effettuare operazioni di manutenzione e pulizia.
Dopo ogni taglio pulire il pettine distanziatore
(7) utilizzato e la lama di taglio (1) soffiandovi
sopra o utilizzando il pennellino (9) in dotazione.
Lubrificare periodicamente la lama seguendo i
passi qui riportati.
Aprire lo sportellino presente sotto la lama di
taglio spingendo la lama come mostrato in
figura.
Rimuovere i capelli rimasti all’interno soffiando o utilizzando il pennellino (9) in
dotazione.
Utilizzare l’olio (10) in dotazione per lubrificare la lama. Sono sufficienti 2-3 gocce se
l’operazione viene eseguita spesso. Come illustrato nella figura a lato, i punti da
lubrificare con l’olio sono due:
Mettere 1-2 gocce sulla lama Mettere 1-2 gocce sull’incastro dell’albero motore.
Utilizzare solo l’olio in dotazione o altri simili, comunque non contenenti acidi.
Rimontare lo sportello:
- Inserire le linguette laterali dello sportellino negli incastri metallici del corpo motore.
- Spingere lo sportello verso il corpo del tagliacapelli.
Per la pulizia non immergere il corpo dell’apparecchio in acqua, ma pulirlo con un panno morbido
leggermente umido.
CARATTERISTICHE TECNICHE
• Alimentazione adattatore: AC 100-240V, 50/60Hz
• Uscita adattatore: DC 3.6V – 1000mA
• Regolazione altezza di taglio
• Batteria Ni-Mh, 2x600mAh - Luce di ricarica
• Accessori: 2 pettini distanziatori, adattatore, olio lubrificante, pennellino, forbici, pettine

Chat with your G3 Ferrari Sfume G30043 manual using AI

Get instant AI answers from your G3 Ferrari Sfume G30043 manual

Ask anything about the G3 Ferrari Sfume G30043. Answers come from this manual, with the pages they are based on.

Sfume G30043 Maintenance Schedule

After each use
Clean the comb and blade

Remove hair from the used comb and cutting blade by blowing on them or using the small brush.

Periodically
Lubricate the blade

Apply 2-3 drops of oil to the blade and driveshaft joint. Unplug device before cleaning.

Regularly
Clean main body

Wipe the main body with a soft slightly damp cloth. Never immerse the unit in water.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Sfume G30043?

Yes No

Frequently Asked Questions

A

When using the product for the first time, you should fully charge the clipper by leaving it connected to the charger for at least ten hours to ensure optimal battery performance for subsequent uses.

Is this answer helpful?

A

No, you should never use the clipper inside a bathtub or under a shower to prevent electrical shock risks. Keep the unit dry and away from water during operation.

Is this answer helpful?

A

The clipper allows setting of cutting heights from 1 to 10 mm using one comb and from 11 to 20 mm using the other comb included in the packaging set.

Is this answer helpful?

A

No, the appliance contains non-replaceable batteries. If the battery fails, you must contact an authorized service center for removal and disposal by specialized personnel.

Is this answer helpful?

A

The device can be used by children aged 8 years and up, provided they are supervised or have received instructions on safety and risks associated with the appliance during use.

Is this answer helpful?

A

Lubricate the blade periodically using the provided oil with 1 to 2 drops on the blade and shaft to maintain performance, especially after cleaning hair debris from the teeth.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Versatile cutting lengths with included combs ranging from 1 to 20 mm for precise styling.
  • Global adapter compatibility with AC voltage acceptance between 100 and 240 volts.
  • LED indicator provides clear visual feedback on battery charging status during use.
  • Class II double insulation ensures enhanced electrical safety for reliable home operation.
  • Comprehensive accessory kit includes scissors, oil, brush, and multiple comb attachments.
VS

Disadvantages

  • Non rechargeable battery cannot be easily replaced by the user if it dies.
  • Not waterproof, so users cannot safely operate the clipper in the wet shower environment.
  • Battery capacity may degrade over time requiring specific full discharge cycle maintenance.
  • Power cord should not be wrapped around the unit during storage to prevent internal damage.
  • Specific adapter required to avoid damage to motor if incorrect voltage is used.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Hair/Beard Trimmer

Power Source

AC, Battery (NiMH)

Color

Green

Cutting Lengths

0.04-0.79 in

Display

No

Attachments

2x Combs (0.04-0.39 in, 0.43-0.79 in)

Features

Automatic voltage adaptation (110-230V), Charging indicator light

Runtime

1 hour

Charge Time

8 hours

Package Contents

Charger, 2 Attachments, Scissors, Comb, Oil, Cleaning brush

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Precision of the Ferrari G3 G30043 Smoky Manual

When it comes to personal grooming, precision and reliability are paramount for maintaining a sharp appearance. The Ferrari G3 G30043 Smoky Manual represents a significant choice for those seeking a versatile hair and beard clipper designed specifically for home use. This rechargeable device offers users the flexibility to achieve various styles with ease. The product is marketed under the technical model JH-837 and operates on a robust Ni-Mh battery system, providing power for extended grooming sessions without constant tethering to a wall outlet.

Technical Performance and Features

Understanding the technical specifications is crucial for any user wanting to maximize utility. This clipper features a cutting height adjustment that accommodates diverse lengths for both hair and facial hair. With the included combs, users can select lengths ranging from 1 to 10 mm or stretch up to 20 mm for longer styles. The machine accepts an AC input voltage between 100 and 240 volts, ensuring global compatibility. The output provides a stable 3.6 volts DC to the motor. A bright LED light indicates the charging status, changing from red to green when fully powered.

Usage and Safety Guidelines

Safe usage is a major priority outlined in the documentation. Users should never immerse the main body in water or use the device inside a bathtub or under a shower. The body is made of durable plastic, and electrical safety regulations classify this as a Class II appliance with double insulation. It is essential to keep the product dry and away from harmful weather conditions. For household safety, the clipper is suitable for children aged 8 years and up, provided they are supervised by an adult. Do not leave the appliance unattended while it is running.

Maintenance and Longevity

To ensure the clipper lasts for years, regular maintenance is required. Cleaning should be performed after every cut by gently blowing debris or using the included small brush to clear the blade area. Periodic lubrication of the blade with the provided oil keeps the motor running smoothly. Do not leave the unit running for more than 10 minutes continuously to prevent overheating. If the battery fails to hold a charge even after a 10-hour full cycle, it may require replacement by authorized service centers.

Conclusion

Ultimately, the Ferrari G3 G30043 Smoky Manual serves as a complete guide. By following instructions regarding the adapter and safety warnings, users can enjoy effective management. The package includes scissors, combs, and power adapter. Contacting support ensures peak condition for grooming needs.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly