Manual.ly Logo

Eurolite Mirror Ball Manual

0.0 · 0 Ratings

PDF manual · 9 Pages

English

M: OA-GPT-5-NAN
page

/ 9

Loading...
8f91798408ab5b3391af0be6ba73fdea448f page 4
00041166.DOC, Version 1.1
4/9
WICHTIG! ÜBERKOPFMONTAGE ERFORDERT EIN HOHES MAß AN ERFAHRUNG. Dies beinhaltet (aber
beschränkt sich nicht allein auf) Berechnungen zur Definition der Tragfähigkeit, verwendetes Installations-
material und regelmäßige Sicherheitsinspektionen des verwendeten Materials und der Spiegelkugel.
Versuchen Sie niemals, die Installation selbst vorzunehmen, wenn Sie nicht über eine solche Qualifikation
verfügen, sondern beauftragen Sie einen professionellen Installateur. Unsachgemäße Installationen können
zu Verletzungen und/oder zur Beschädigung von Eigentum führen.
Die Spiegelkugel muss außerhalb des Handbereichs von Personen installiert werden.
Achtung: Spiegelkugeln können beim Herabstürzen erhebliche Verletzungen verursachen! Wenn Sie
Zweifel an der Sicherheit einer möglichen Installationsform haben, installieren Sie die Kugel NICHT!
Vergewissern Sie sich vor der Montage, dass die Montagefläche mindestens 10 kg Punktbelastung
aushalten kann.
Für die Spiegelkugel 15cm oder 20 cm darf ausschließlich der EUROLITE MD-1015 Drehmotor mit
Netzstecker, Best.-Nr. 50301150 oder EUROLITE MD-1030 Drehmotor mit Netzstecker, Best.-Nr. 50301205
oder ein sicherheitstechnisch mindestens gleichwertiger Motor verwendet werden.
Die Spiegelkugel muss über eine geeignete Aufhängung (siehe oben) mit dem Motor verbunden werden.
Dazu empfehlen wir die Knotenkette 2,5mm, WLL 20kg, 33cm, Best.-Nr. 50301600 oder Knotenkette
2,5mm, WLL 20kg, 1m, Best.-Nr. 50301605.
Als Aufhängungsmaterial dürfen niemals scheuernde Materialien wie z. B. Stahlseile verwendet
werden, um eine Abnützung aufgrund der hohen Reibung zu verhindern.
Die Länge der verwendeten Kette darf niemals 100 cm überschreiten.
Befestigen Sie die Lastkette mit dem Schraubkettenglied an der Befestigungsöse der Spiegelkugel und
ziehen Sie die Feststellmutter gut fest.
Hängen Sie die Lastkette mit der Spiegelkugel in dem Schraubkettenglied am Motor ein und ziehen Sie die
Feststellmutter gut fest.
Achten Sie darauf, dass die Rotation der Spiegelkugel nicht durch Dekorationsteile etc. abgebremst oder
unterbrochen wird.
Achten Sie darauf, dass niemals Seitenkräfte auf die Installation einwirken können.
Überprüfen Sie in regelmäßigen Abständen, ob sich die Aufhängevorrichtung (z. B. Schäkel, Schraub-
karabiner oder Schraubkettenglieder) oder Kettenglieder der Kette Verformungen aufweisen. In einem
solchen Fall hängen Sie die Spiegelkugel bitte sofort ab.
LEBENSGEFAHR!
VordererstenInbetriebnahmemussdieEinrichtungdurcheinenSachverständigengeprüftwerden!
REINIGUNG UND WARTUNG
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens alle vier Jahre durch einen Sachverständigen im Umfang der Abnahmeprüfung geprüft werden.
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens einmal jährlich durch einen Sachkundigen geprüft werden.
Dabei muss unter anderem auf folgende Punkte besonders geachtet werden:

Chat with your Eurolite Mirror Ball manual using AI

Get instant AI answers from your Eurolite Mirror Ball manual

Ask anything about the Eurolite Mirror Ball. Answers come from this manual, with the pages they are based on.

Mirror Ball Maintenance Schedule

Remind me when maintenance is due
Yearly
Skilled person safety inspection

Safety-related and machine-technical installations must be inspected annually by a skilled person.

Every 4 years
Expert acceptance test of installation

Safety-related and machine-technical installations must be inspected by an expert every four years.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Mirror Ball?

Yes No

Frequently Asked Questions

A

Use the Eurolite MD-1015 or MD-1030 rotary motors with power plug (or a technically equivalent motor). These are specified to ensure safe rotation and proper compatibility with the 15 cm mirrorball.

Is this answer helpful?

A

Yes. The mirrorball must always be fitted with a secondary, independent safety attachment designed so that no part of the installation can fall if the main attachment fails.

Is this answer helpful?

A

Overhead installation requires extensive rigging experience. If you lack qualifications in load calculations and structural rigging, you should hire a professional installer to avoid risk of injury or property damage.

Is this answer helpful?

A

Inspections are required at least once a year by a competent person and every four years by an expert as part of an acceptance test. Regular visual checks between formal inspections are also recommended.

Is this answer helpful?

A

Eurolite recommends double loop chain 2.5 mm, WLL 20 kg (33 cm or 1 m variants) and screw-on chain links. Avoid abrasive materials like steel cables and keep chain length under 100 cm.

Is this answer helpful?

A

Check that all mounting screws are tight and corrosion-free, ensure housings and fixations show no deformation, verify moving parts for wear or imbalance, and inspect electrical cables for damage. Use authorized service for repairs and original spare parts.

Is this answer helpful?

A

Failure to follow the manual can void the warranty and relieve the manufacturer of liability for resulting damage or injuries. Always adhere to the specified installation, safety, and maintenance procedures.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact 15 cm diameter offers strong visual effect while remaining lightweight (~0.5 kg).
  • Gold finish produces warm, atmospheric reflections distinct from standard silver mirrorballs.
  • Compatible with Eurolite MD-1015 and MD-1030 motors for reliable rotation and easy setup.
  • Clear mounting recommendations and safety requirements minimize installation risk when followed.
  • Uses widely available accessory parts (chains, quick links) for standardized rigging.
VS

Disadvantages

  • Requires professional overhead rigging; not suitable for DIY installation by untrained users.
  • Must always be secured with a secondary safety attachment, adding complexity to installation.
  • Chain length limited to 100 cm and specific materials required, restricting some mounting options.
  • Periodic inspections and expert approvals required (annual and four-year checks), increasing maintenance effort.
  • Warranty void if installation or use deviates from manual instructions, limiting flexibility.
M: OA-GPT-5-NAN

Product Specification

Type

Mirror ball (Full sphere)

Facets

Real glass

Core material

Plastic

Color

gold

Dimensions

5.91x5.91x5.91in (WxHxD)

Weight

1.10 lb

M: OA-GPT-54-NAN

Product Description

Eurolite Spiegelkugel 15cm gold Manual

The Eurolite Spiegelkugel 15cm gold is a compact, decorative mirrorball designed to create classic disco-style lighting effects when combined with appropriate illumination. Lightweight and finely faceted, the 15 cm gold mirrorball reflects and scatters light to produce warm, shimmering patterns ideal for small venues, home parties, bars, and staged events. Built with safety and professional use in mind, this mirrorball pairs with recommended Eurolite motors and mounting hardware to ensure reliable rotation and stable installation.

Product overview

This 15 cm gold mirrorball offers an attractive alternative to standard silver variants, adding a softer, warmer tone to reflected light. Constructed to Eurolite specifications, it is supplied in a protected packaging to prevent transit damage and must be inspected upon receipt. The mirrorball is suitable for decorative effect use only and requires proper rigging and secondary safety attachments to meet recommended standards.

Key features and usage

  • Diameter: 15 cm; Weight: approximately 0.5 kg.
  • Designed to be used with approved Eurolite rotary motors (MD-1015 or MD-1030 series) or technically equivalent motors to ensure safe rotation.
  • Recommended suspension: double loop chain 2.5 mm (WLL 20 kg) with appropriate screw-on chain link; chain length should not exceed 100 cm.
  • Overhead installation requires professional rigging experience and compliance with national and international safety norms.

Installation should always include a redundant safety attachment and regular inspections. The mirrorball must be installed out of reach of people and never under questionable mountings. Eurolite advises professional installation and periodic inspections by qualified personnel to maintain safe operation and warranty compliance.

Care and maintenance

Regular checks are vital: ensure mounting screws are tight and corrosion-free, inspect housing and suspension points for deformation, verify moving parts for wear or imbalance, and check electrical connections if motors are used. Maintenance and service should be carried out by authorized dealers; use only original spare parts.

Notes

  • Always keep children and untrained persons away from the installed fixture.
  • Do not use abrasive suspension materials like steel cables that can cause wear.
  • Before first use after installation, have the complete rigging inspected and approved by a qualified expert.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly