Manual.ly Logo

Eurolite LED BC-4 Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: OA-GPT-5-NAN
page

/ 16

Loading...
56c978f22c02b3c3471ae2e6aa1d7ffd07fb page 4
00108598.DOC, Version 1.0
4/16
Das Gerät darf nicht in Betrieb genommen werden, nachdem es von einem kalten in einen warmen Raum
gebracht wurde. Das dabei entstehende Kondenswasser kann unter Umständen Ihr Gerät zerstören. Lassen
Sie das Gerät solange uneingeschaltet, bis es Zimmertemperatur erreicht hat!
Der Aufbau entspricht der Schutzklasse II. Das Gerät ist schutzisoliert. Der Netzstecker darf nur an eine
Steckdose angeschlossen werden, deren Spannung und Frequenz mit dem Typenschild des Gerätes genau
übereinstimmt. Ungeeignete Spannungen und ungeeignete Steckdosen können zur Zerstörung des Gerätes
und zu tödlichen Stromschlägen führen.
Den Netzstecker immer als letztes einstecken. Der Netzstecker muss dabei gewaltfrei eingesetzt werden.
Achten Sie auf einen festen Sitz des Netzsteckers.
Lassen Sie die Netzleitung nicht mit anderen Kabeln in Kontakt kommen! Seien Sie vorsichtig beim Umgang
mit Netzleitungen und -anschlüssen. Fassen Sie diese Teile nie mit nassen Händen an! Feuchte Hände
können tödliche Stromschläge zur Folge haben.
Vergewissern Sie sich, dass die anzuschließende Netzspannung nicht höher ist als auf dem Typenschild
angegeben.
Netzleitungen nicht verändern, knicken, mechanisch belasten, durch Druck belasten, ziehen, erhitzen und
nicht in die Nähe von Hitze- oder Kältequellen bringen. Bei Missachtung kann es zu Beschädigungen der
Netzleitung, zu Brand oder zu tödlichen Stromschlägen kommen.
Die Kabeleinführung oder die Kupplung am Gerät dürfen nicht durch Zug belastet werden. Es muss stets
eine ausreichende Kabellänge zum Gerät hin vorhanden sein. Andernfalls kann das Kabel beschädigt
werden, was zu tödlichen Stromschlägen führen kann.
Achten Sie darauf, dass die Netzleitung nicht gequetscht oder durch scharfe Kanten beschädigt werden
kann. Überprüfen Sie das Gerät und die Netzleitung in regelmäßigen Abständen auf Beschädigungen.
Werden Verlängerungsleitungen verwendet muss sichergestellt werden, dass der Adernquerschnitt für die
benötigte Stromzufuhr des Gerätes zugelassen ist. Alle Warnhinweise für die Netzleitung gelten auch für
evtl. Verlängerungsleitungen.
Gerät bei Nichtbenutzung und vor jeder Reinigung vom Netz trennen! Fassen Sie dazu den Netzstecker an
der Grifffläche an und ziehen Sie niemals an der Netzleitung! Ansonsten kann das Kabel und der Stecker
beschädigt werden was zu tödlichen Stromschlägen führen kann. Sind Stecker oder Geräteschalter, z. B.
durch Einbau nicht erreichbar, so muss netzseitig eine allpolige Abschaltung vorgenommen werden.
Wenn der Netzstecker oder das Gerät staubig ist, dann muss es außer Betrieb genommen werden, der
Stromkreis muss allpolig unterbrochen werden und das Gerät mit einem trockenen Tuch gereinigt werden.
Staub kann die Isolation reduzieren, was zu tödlichen Stromschlägen führen kann. Stärkere Verschmut-
zungen im und am Gerät dürfen nur von einem Fachmann beseitigt werden.
Es dürfen unter keinen Umständen Flüssigkeiten aller Art in Steckdosen, Steckverbindungen oder in
irgendwelche Geräteöffnungen oder Geräteritzen eindringen. Besteht der Verdacht, dass - auch nur
minimale - Flüssigkeit in das Gerät eingedrungen sein könnte, muss das Gerät sofort allpolig vom Netz
getrennt werden. Dies gilt auch, wenn das Gerät hoher Luftfeuchtigkeit ausgesetzt war. Auch wenn das
Gerät scheinbar noch funktioniert, muss es von einem Fachmann überprüft werden ob durch den
Flüssigkeitseintritt eventuell Isolationen beeinträchtigt wurden. Reduzierte Isolationen können tödliche
Stromschläge hervorrufen.
In das Gerät dürfen keine fremden Gegenstände gelangen. Dies gilt insbesondere für Metallteile. Sollten
auch nur kleinste Metallteile wie Heft- und Büroklammern oder gröbere Metallspäne in das Gerät gelangen,
so ist das Gerät sofort außer Betrieb zu nehmen und allpolig vom Netz zu trennen. Durch Metallteile
hervorgerufene Fehlfunktionen und Kurzschlüsse können tödliche Verletzungen zur Folge haben.
GESUNDHEITSRISIKO!
BlickenSieniemalsdirektindieLichtquelle,dabeiempfindlichenMenschenu.U.
epileptischeAnfälleausgelöstwerdenkönnen(giltbesondersfürEpileptiker)!

Chat with your Eurolite LED BC-4 manual using AI

Get instant AI answers from your Eurolite LED BC-4 manual

Ask anything about the Eurolite LED BC-4. Answers come from this manual, with the pages they are based on.

LED BC-4 Maintenance Schedule

Regularly
Clean the device exterior

Remove dust and dirt using a soft, lint-free, damp cloth. Do not use alcohol or solvents.

Regularly
Inspect power cord and device

Check the device and power cord periodically for damage; disconnect from mains if damaged.

When dusty
Clean dusty plug or device

If the plug or device is dusty, disconnect it and clean with a dry cloth to prevent insulation reduction.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend LED BC-4?

Yes No

Frequently Asked Questions

A

The BC-4 operates on 230 V AC, 50 Hz and draws approximately 8 W. Ensure the outlet matches the device’s rating and use a residual current device (RCD) of 30 mA for safety.

Is this answer helpful?

A

No. The device is designed for indoor use only and must be kept away from rain, moisture, fog jets, and high humidity. Exposure to moisture can reduce insulation and cause electrical hazards.

Is this answer helpful?

A

Overhead installation requires a mounting point rated to hold at least 10 times the device weight for one hour and a secondary independent safety attachment. Have a qualified rigger perform the installation and inspect safety hardware regularly.

Is this answer helpful?

A

Disconnect from mains before cleaning. Use a soft, lint-free damp cloth only; do not use alcohol or solvents. There are no user-serviceable parts—maintenance and repairs must be done by authorized technicians using original spare parts.

Is this answer helpful?

A

Maintain at least 50 cm free space around the unit for ventilation, keep the unit at least 0.5 m from flammable materials, and ensure a minimum 0.1 m distance between the light output and illuminated objects.

Is this answer helpful?

A

Yes. The BC-4 should be used between -5° C and +45° C ambient temperature (max Ta 45° C) and at altitudes between -20 and 2000 m above sea level. Max steady-state housing temperature is 60° C.

Is this answer helpful?

A

Yes. The unit falls under WEEE regulations and should be taken to a local recycling facility at end of life. Do not dispose of it in household waste; contact your retailer or local authorities for proper disposal information.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact, lightweight design (0.3 kg) for flexible placement and easy rigging.
  • Six 1 W LEDs in multiple colors produce vivid, rotating beam effects with low power consumption (8 W).
  • Plug-and-play operation with Euro plug makes setup quick and user-friendly.
  • Dual installation options: standing or hanging with proper safety measures and secondary attachment.
  • Low maintenance: no user-serviceable parts and simple cleaning with a damp cloth.
VS

Disadvantages

  • Indoor use only; not rated for outdoor, wet, or high-humidity environments.
  • No advanced control modes—basic plug-and-play unit without DMX or programmable features.
  • Requires careful overhead rigging expertise and redundant safety attachment for hanging installations.
  • Minimum clearances needed (50 cm ventilation, 0.5 m from flammable materials) may limit placement.
  • Not suitable for continuous 24/7 operation; periodic breaks recommended to extend lifespan.
M: OA-GPT-5-NAN

Product Specification

Effects

Mirror Ball Emulator

Power Consumption

8W

Dimensions

7.17x5.91x7.60in (WxHxD)

Weight

0.66lb

M: OA-GPT-54-NAN

Product Description

Eurolite LED BC-4 — Compact Beam Effect with Easy Setup

The Eurolite LED BC-4 is a compact beam-effect fixture engineered to create striking mirror-ball style light plays for clubs, stages, private events, and small installations. Equipped with six 1 W LEDs in red, orange, blue, white, green, and violet, the BC-4 spins its faceted clear lens to project crisp, multi-color beams. Its modest size and 0.3 kg weight make it easy to position on floors, shelves, or rig it overhead using the included mounting points and a safety bond.

Key features and operation

The BC-4 produces approximately 20 rotations (180°) per minute, generating circular, rotating light patterns that add motion and color to ambient lighting. The unit is plug-and-play via a Euro power plug, drawing only 8 W from a 230 V, 50 Hz supply. It supports both standing and hanging installation; when rigged overhead, a secondary safety attachment and proper structural assessment are required. The fixture is designed for indoor professional use (stages, discos, theaters) and must be kept at least 0.5 m from flammable materials and 0.1 m from the illuminated surface.

Safety and maintenance

As a mains-powered lighting device, the BC-4 comes with clear safety guidance: follow qualified installation procedures, avoid moisture and direct exposure to fog/smoke jets, and disconnect mains before cleaning or servicing. Users should never open the housing and must protect the unit from condensation after temperature changes. Cleaning is simple — a soft, damp lint-free cloth only; solvents and alcohol are prohibited. There are no user-serviceable parts inside; authorized technicians should handle repairs and spare parts.

Practical use and performance

This fixture is well suited for accent lighting, decorative effects, and small-scale entertainment setups where dynamic colored beams are desired without complex control systems. Its low power draw and small footprint make it energy-efficient and unobtrusive. Operation is immediate upon connection to a correctly rated mains supply; nonetheless, regular breaks in operation and correct ventilation (50 cm clearance) help prolong LED life and prevent overheating.

Notes

  • Intended for indoor professional use only (230 V, 50 Hz).
  • Keep the device out of reach of children and untrained users.
  • Always secure hanging installations with redundant safety attachments.
  • Do not expose the unit to direct fog/smoke jets; maintain at least 0.5 m distance.
  • Dispose of the unit according to WEEE regulations; do not place in household waste.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly