Manual.ly Logo

EUFAB PROBC Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: OA-GPT-5-NAN
page

/ 52

Loading...
e7e1a047b2e95caf7b990ae3a6dcc49a3d35 page e
14
Bild 33: Kennzeichenhalter in Aufbewahrungsposition
Bild 34: Zusammenklappen des Fahrradträgers
Bild 35: Tragegri
6. WARTUNG UND PFLEGE
6.1 WARTUNG
7. HINWEISE ZUM UMWELTSCHUTZ
6.2 PFLEGE
Bei bestimmungsgemäßem Gebrauch ist der Fahrradträger wartungsfrei.
Das Symbol mit der durchgestrichenen Mülltonne bedeutet,
dass Elektro- und Elektronikgeräte nicht zusammen mit
dem Hausmüll entsorgt werden dürfen. Verbraucher sind
gesetzlich dazu verpichtet, Elektro- und Elektronikgeräte
am Ende ihrer Lebensdauer einer vom unsortierten
Siedlungsabfall getrennten Erfassung zuzuführen. Auf
diese Weise wird eine umwelt- und ressourcenschonende
Verwertung sichergestellt.
Reinigen Sie den Fahrradträger mit einem milden Reinigungsmittel, mit
warmem Wasser und/oder einem weichen Tuch. Entfernen Sie vorher
groben Schmutz und Staub.
Benutzen Sie keine Lösungsmittel oder ähnliche Reiniger, da diese den
Fahrradträger beschädigen können.
Lassen Sie den Fahrradträger von alleine trocknen. Benutzen Sie keinen Fön
oder andere Heizgeräte für eine Beschleunigung des Trocknungsvorgangs.
Reinigen Sie den Fahrradträger im Küstenbereich und beim Einsatz bei
Winterbedingungen regelmäßig, um Salz abzuspülen und die Haltbarkeit
des Fahrradträgers zu verlängern.
Lagern Sie den Fahrradträger in längeren Zeiten ohne Benutzung (z. B. über
den Winter) trocken und geschützt, um die Lebensdauer zu verlängern.
Prüfen Sie vor jeder Fahrt den Fahrradträger auf Verschleiß.
Defekte Teile und Spannriemen müssen ausgetauscht werden.
Die Stahlteile des Fahrradträgers wurden werksseitig durch eine
Pulverlackbeschichtung gegen Korrosion geschützt. Ist diese Lackschicht
beschädigt, sorgen Sie schnellstmöglich für eine professionelle Beseitigung
des Schadens.
Für den Austausch der Teile wenden Sie sich an unseren Kundenservice.
Jegliche Veränderung an Originalteilen und Materialien oder an der
Konstruktion des Fahrradträgers kann die Sicherheit und Leistungsfähigkeit
beeinträchtigen.
Mit dem genialen Einklappsystem
einfach zu tragen und lagern.
Durch seine Beleuchtungsanlage ist der Fährradträger ein Elektrogerät.
Batterien und Akkumulatoren, die nicht fest vom Elektro- oder
Elektronikgerät umschlossen sind und zerstörungsfrei entnommen werden
können, sind vor der Abgabe des Geräts an einer Erfassungsstelle von
diesem zu trennen und einer vorgesehenen Entsorgung zuzuführen. Das
Gleiche gilt für Lampen, die zerstörungsfrei aus dem Gerät entnommen
werden können.
Elektro- und Elektronikgerätebesitzer aus privaten Haushalten können
diese bei den Sammelstellen der öentlich-rechtlichen Entsorgungsträger
oder bei den von den Herstellern bzw. Vertreibern im Sinne des ElektroG
eingerichteten Sammelstellen abgeben. Die Abgabe von Altgeräten ist
unentgeltlich.
Rücknahmepichtig sind Händler mit einer Verkaufsäche von
mindestens 400 m² für Elektro- und Elektronikgeräte. Das Gleiche gilt für
Lebensmittelhändler mit einer Gesamtverkaufsäche von mindestens
• Entsperren Sie den Nummernschildhalter und drehen Sie ihn in die
Aufbewahrungsposition.
• Klappen Sie den Fahrradträger zusammen.
• Ziehen Sie den Stecker aus der Anhängersteckdose Ihres Fahrzeugs.
• Önen Sie den Hebel des Schnellverschlusses und heben Sie den Träger
von der Kupplung ab.
5.9 ABNEHMEN DES FAHRRADTRÄGERS VON DER
ANHÄNGERKUPPLUNG
Beim Entfernen des Fahrradträgers gehen Sie anschließend in umgekehrter
Reihenfolge der Montage vor:
Bild 32: Kennzeichenhalter entriegeln und zurückschwenken
1.
2.

Chat with your EUFAB PROBC manual using AI

Get instant AI answers from your EUFAB PROBC manual

Ask anything about the EUFAB PROBC. Answers come from this manual, with the pages they are based on.

PROBC Maintenance Schedule

Before every trip
Check straps and carrier for wear

Before each journey, check that all straps are undamaged, worn-free, and securely fastened. Replace any damaged or worn straps immediately.

Show in the manual (page 14)
Regularly in coastal/winter use
Clean to remove salt

Clean the bicycle carrier regularly when used in coastal areas or winter conditions to wash off salt and prolong service life.

Show in the manual (page 14)
After extended storage
Store in dry protected area

When not used for extended periods, store the carrier in a dry and protected area to prolong its service life.

Show in the manual (page 14)
Immediately if damaged
Repair powder coating damage

If the factory powder coating on steel parts is damaged, have it professionally repaired as soon as possible to prevent corrosion.

Show in the manual (page 14)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PROBC?

Yes No

Frequently Asked Questions

A

PROBC2 and PROBC2+ carry up to two bikes; PROBC2+ has extra distance to allow large tailgate clearance. PROBC3 carries up to three bikes. An extension increases capacity (item 11572) to carry up to three or four bikes depending on base model. Always respect the 60 kg maximum load and your vehicle’s towbar limits.

Is this answer helpful?

A

Mount only to towbars made from at least steel St52 or grey cast iron GG52 with a D‑value > 7.6 kN and a 50 mm towball (Class A‑50). Never mount to aluminium, other light metals, or plastic couplings; failure to meet specifications can cause breakage and serious hazards.

Is this answer helpful?

A

Use the supplied frame holders, the safety strap for the frame, and the wheel tensioning straps for the front and rear wheels. Check and tighten all straps before each trip; replace any damaged straps with approved replacements. Always fit the safety strap—operation without it is forbidden.

Is this answer helpful?

A

The carrier is equipped with a 13‑pin connector standard; plug assignments for 13‑pin and 7‑pin are provided. Conversion from 13‑pin to 7‑pin should only be performed by a qualified specialist. Always check lighting operation before driving and replace defective bulbs.

Is this answer helpful?

A

Rinse salt off regularly when used in coastal or winter conditions, clean with mild detergent and warm water, do not use solvents, and allow to air dry. Store the folded carrier dry and protected during long non‑use periods. Inspect for wear before each trip and have damaged metal parts or straps replaced via customer service.

Is this answer helpful?

A

Only PROBC2+ is designed with extended distance to allow opening larger tailgates. Always fold the carrier down/up as instructed, switch off electric tailgate release and operate manually, and ensure the carrier is secured to avoid collision with the tailgate.

Is this answer helpful?

A

Adjust driving style for altered vehicle dynamics, avoid sudden steering movements, and do not exceed 130 km/h. Drive slowly over speed bumps (max 10 km/h) and verify carrier attachment after a few kilometres. Do not drive on rough terrain with the carrier mounted.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Solid steel/aluminium construction with folding system for easy storage and transport
  • Modular capacity: 2-bike, 2-bike extended (PROBC2+), and 3-bike (PROBC3) options with extension availability
  • Integrated lighting with 13‑pin connector and clear plug assignment for professional retrofitting
  • Quick-lock towball system with adjustable tension for a secure fit on rated towbars
  • Simple maintenance: rinse after coastal/winter use, store dry; minimal upkeep when used correctly
VS

Disadvantages

  • Requires compatible towbar materials and ratings (min. St52 or GG52, D-value > 7.6 kN, 50 mm towball)
  • Not suitable for commercial use or mounting on aluminium/other light-metal couplings
  • Maximum total load capped at 60 kg—may limit heavier e-bike transport without special configuration
  • Some frame holders may cause minor pressure marks; extra protection for bike frames recommended
  • Professional help recommended for electrical retrofitting from 13‑pin to 7‑pin connectors
M: OA-GPT-5-NAN

Product Specification

Type

Bicycle carrier

Mounting

Rear/Towbar

Max. load capacity

132.28 lb

Special features

foldable, Taillights (13-Pin)

Color

black, silver

M: OA-GPT-54-NAN

Product Description

EUFAB ProBC — Reliable Towbar Bike Carrier

The EUFAB ProBC series (PROBC2, PROBC2+, PROBC3) is a robust towbar-mounted bicycle carrier designed for everyday cyclists and families who need a dependable way to transport two to three bikes. Built from a combination of steel and aluminium, the ProBC offers a folding mechanism, integrated lighting, and modular options—PROBC2/PROBC2+ for two bikes and PROBC3 for three bikes—with an extension available to increase capacity. The PROBC2+ variant extends the carrier away from the towball to allow larger tailgates (minivans, minibuses) to open safely.

Practical features include secure frame holders, wheel straps, a safety strap for the frame, and a quick-lock system for solid attachment to the towball. The carrier connects to vehicle electrics via a 13‑pin plug (with reference assignments provided for 7‑pin conversions by professionals) so lights and indicators remain fully functional while towing. The foldable design with a carrying handle makes storage and transport easy when the carrier is not in use.

Performance specs are clear and user-focused: the carrier has a maximum usable load of 60 kg, supports tyre widths up to 3.25" (8 cm) and wheelbases up to 135 cm, and weighs roughly 17–22 kg depending on model. Stated supporting loads and use limits vary with vehicle towbar ratings; the manufacturer emphasizes that the carrier must only be mounted to suitably rated towbars (minimum steel St52 or GG52 cast iron, D-value > 7.6 kN, 50 mm towball) and warns against mounting to aluminium or plastic couplings.

Safety and maintenance are central to the ProBC documentation. Users are urged to follow assembly and mounting steps precisely, to use only approved straps and replacement parts, and to routinely check fastenings, straps and lights before each journey. Driving behaviour recommendations address altered vehicle dynamics—do not exceed 130 km/h, slow over speed bumps, and adjust speed for the added load. The carrier is maintenance-minimal when used correctly: rinse salt away after coastal or winter use, avoid solvents, and store dry when not used for long periods. Damaged parts or worn straps must be replaced via customer service.

Notes

  • Designed for consumer (non-commercial) use and not intended for children or inexperienced persons to operate alone.
  • The general operating permit must be carried when the rack is fitted.
  • Avoid using tarpaulins or covers that increase air resistance.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly