Manual.ly Logo

EUFAB Lockable Frame Holder Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
bc9bc25eb74dd188b352c654997f82088b1b page 4
4
Bedienungsanleitung
1 abschließbare Knaufmutter
2 Ausgleichsscheibe
3 Rahmenklammer
4 Schloßschraube M8
5 Rohr
6 U-Bügelschelle
7 Stopfen
8 Gummieinlagen Ø 25 mm und Ø 30 mm
Montage des Rahmenhalters
Bevor Sie diesen abschließbaren Rahmenhalter einsetzen können, müssen Sie ihn vorab zerlegen. Schrauben Sie zuerst die Knaufmutter ab.
Entfernen Sie nun die Ausgleichsscheibe und die Rahmenklammer. Setzten Sie nun das Gewinde der Schloßschraube auf eine feste Unterla-
ge und drücken vorsichtig das Rohr in Richtung der Unterlage. Der Schraubenkopf schiebt nun den Stopfen aus der U-Bügelschelle heraus.
Ziehen Sie die Schloßschraube ganz heraus. Legen Sie die für Ihren Fahrradträger passende Gummieinlage, an einer für Ihr Fahrrad geeigneten
Stelle, um den U-Bügel. Önen Sie die Bügelschelle und legen Sie sie um die Gummieinlage. Drücken Sie die Bügelschelle ganz zusammen.
Die Gummieinlage dabei darf nicht geknickt oder gequetscht werden. Setzen Sie die Schloßschraube wieder ein. Auf das Gewindeende der
Schloßschraube setzen Sie jetzt erst die Rahmenklammer und dann die Ausgleichsscheibe. Die gewölbte Seite der Ausgleichsscheibe muß zur
Rahmenklammer weisen. Drücken Sie die Rahmenklammer zusammen und schieben Sie sie in Richtung Bügelschelle, damit genug Gewinde
der Schloßschraube frei wird. Setzen Sie nun die Knaufmutter auf das Gewinde und drehen Sie sie einmal ganz fest, damit sich alle Teile setzen
und zusammenfügen. Stecken Sie den Stopfen wieder oben in die Bügelschelle.
Befestigung eines Fahrrades mit dem Rahmenhalter
Drehen Sie die Knaufmutter solange gegen den Uhrzeigersinn, bis sich die Rahmenklammer weit genug für den Fahrradrahmen geönet hat.
Setzen Sie den Fahrradrahmen in die Rahmenklammer ein. Drehen Sie die Knaufmutter so lange im Uhrzeigersinn, bis die Rahmenklammer
den Fahrradrahmen locker umschließt. Richten Sie das Fahrrad und den Rahmenhalter aus, sodaß alles sicher zusammen paßt. Ziehen Sie die
Knaufmutter jetzt fest an.
Nur in fest angezogenem Zustand können Sie den Rahmenhalter abschließen.
Stecken Sie den Schlüssel ins Schloß der Knaufmutter und drehen ihn, sodaß die rote Markierung zum Schloßsymbol zeigt. Ziehen Sie den
Schlüssel wieder ab. Ihr Fahrrad ist jetzt gegen Diebstahl gesichert.
ACHTUNG: Bevor Sie losfahren, müssen Sie das Fahrrad noch gemäß der Anleitung Ihres Fahrradträgers sichern (Spanngurte, Sicher-
heitsgurt etc.)
Wartung und Pege
Reinigen Sie den Rahmenhalter mit einem nur leicht feuchten, weichen Tuch und einem milden Reinigungsmittel. Verwenden Sie keine schar-
fen Reinigungsmittel, Lösemittel oder Benzin. Stellen Sie sicher, daß keine Reinigungsmittel oder Flüssigkeiten in das Rohr des Rahmenhalters
eindringen.
Schmieren Sie das Schloß gelegentlich mit einem harzfreien Öl, z. B. WD40.
Bewahren Sie die Rahmenhalter an einem trockenen Ort auf.
Hinweise zum Umweltschutz
Entsorgen Sie dieses Gerät über die Wertstotonne oder die öentlichen/kommunalen Sammelstellen.
Die Materialien sind recycelbar. Durch Recycling, stoiche Verwertung oder andere Formen der Wiederverwendung von Altgeräten leisten Sie
einen wichtigen Beitrag zum Schutz unserer Umwelt!
Kontaktinformationen
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Deutschland
1
2
4
8
6
5
7
3
Telefon: +49 (0)202 42 92 83 0
Telefax: +49 (0)202 42 92 83 160
Internet: www.eal-vertrieb.com
E-Mail: info@eal-vertrieb.com

Chat with your EUFAB Lockable Frame Holder manual using AI

Get instant AI answers from your EUFAB Lockable Frame Holder manual

Ask anything about the EUFAB Lockable Frame Holder. Answers come from this manual, with the pages they are based on.

Lockable Frame Holder Maintenance Schedule

Occasionally
Clean the frame holder

Use a slightly moist soft cloth and mild cleaning agent. Do not use aggressive agents, solvents, or petrol.

Occasionally
Lubricate the lock

Apply resin-free oil such as WD40 to the lock occasionally.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Lockable Frame Holder?

Yes No

Frequently Asked Questions

A

It is used to secure a bicycle frame to the U-bracket of a bike rack. The lockable knob nut helps keep the bike stable and adds extra protection against theft during transport.

Is this answer helpful?

A

The holder is made for U-brackets with 25 mm or 30 mm diameter and bicycle frames between 30 mm and 60 mm. That makes it suitable for many standard bikes, depending on the rack setup.

Is this answer helpful?

A

No. It should be used together with the rack’s straps, safety belt, or other securing system. The frame holder locks the bike to the bracket, but the bike still needs full transport restraint.

Is this answer helpful?

A

After tightening the knob nut around the frame, insert the key into the lock and turn it until the red marking points to the lock symbol. Then remove the key to complete the locking step.

Is this answer helpful?

A

Use a soft, slightly damp cloth with a mild cleaner. Avoid solvents, gasoline, and harsh chemicals. Do not let liquid enter the tube, and lubricate the lock occasionally with resin-free oil.

Is this answer helpful?

A

No. The frame holder is not intended for use by children or people without the required knowledge. It should be handled by adults who understand the installation and safety instructions.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Lockable knob nut adds useful anti-theft protection during transport.
  • Fits common U-bracket sizes and a broad bicycle frame range.
  • Rubber inserts help improve grip and reduce metal-to-metal contact.
  • Available in two lengths for better setup flexibility.
VS

Disadvantages

  • Must still be used with rack straps or a safety belt for full transport safety.
  • Requires careful assembly before the first use.
  • Only works with specific bracket and frame dimensions.
  • Should not be used if visibly damaged, so regular inspection is necessary.
M: OA-GPT-54-NAN

Product Specification

Type

Grab bar

M: OA-GPT-54-NAN

Product Description

EUFAB Long Lockable Frame Holder: Practical Bike Security for Travel

The EUFAB Long Lockable Frame Holder Manual introduces a compact but important accessory for anyone transporting a bicycle on a rear rack. Built to secure the bike frame to the U-bracket of a carrier, this frame holder adds stability while also offering an extra layer of theft protection through a lockable knob nut. It is designed for everyday cyclists who want a more confident and tidy way to fasten a bike before hitting the road.

What makes this product especially useful is its flexible fit. The holder supports U-brackets with 25 mm and 30 mm diameters, while the bicycle frame range covers 30–60 mm, making it suitable for many common bike setups. Two versions are available, including a shorter and a longer model, so users can choose the format that best matches their rack and frame geometry. The included rubber inserts help protect contact points and improve grip, reducing the risk of scratches or slipping during transport.

Installation is straightforward, although it does require careful assembly before first use. The holder is delivered with the necessary keys, rubber inserts, and operating instructions, and the locking mechanism is integrated into the knob nut. Once mounted, the frame clamp can be opened, positioned around the bicycle frame, and tightened securely. When fully closed, the lock can be engaged to keep the bicycle in place. This makes the holder a smart companion for weekend trips, cycling holidays, or routine transport between home and trail.

Like any safety-related transport accessory, the EUFAB Long Lockable Frame Holder benefits from proper handling. It should be used only as intended, checked for visible damage before each use, and combined with the bike rack’s own straps or safety belt system. A locked frame holder is helpful, but it is not a replacement for full transport security. For long-term reliability, simple care is enough: clean it with a soft damp cloth, avoid harsh chemicals, and occasionally lubricate the lock with resin-free oil.

In short, this frame holder is a thoughtful mix of function, convenience, and added security. It suits riders who want a dependable mounting point with a lockable feature and a clean, practical design.

Notes

  • Use only with compatible U-bracket and frame dimensions.
  • Always secure the bicycle with the rack’s additional straps.
  • Store the holder in a dry place after use.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly