Manual.ly Logo

EUFAB Frame Holder Manual

5.0 · 1 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
0ce109b344def217f0afa08c34a8ac024f0a page 2
2
DE
Montageanleitung Rahmenhalter Art.-Nr. 11230 und Art.-Nr. 11231
Öffnen Sie die Klammer des Rahmenhalters, indem Sie die Rändelschraube ganz herausdrehen. Je
nach Durchmesser des U – Bügels (oder Turm) Ihres Fahrradträgers wählen Sie die passende
Einlage und legen diese um das U – Bügelrohr (Turmrohr) herum. Anschließend die Klammer über
diese Einlage legen und zusammendrücken. Mit der Rändelschraube durch beide Bohrungen der
Klammer die Fahrradrahmen Befestigung anschrauben. Die Rahmen der Fahrräder werden mit dem
Spanngurt gesichert. Als letztes drehen Sie die Rändelschraube fest zusammen.
Achtung: Sichern Sie die Fahrräder immer mit einem zusätzlichen Sicherheitsgurt. (kein
Lieferumfang).
Einlagen sind passend für Rohrstärken von 25 – 30 mm Durchmesser.
GB
Fitting Instructions for Frame Holder Prod. No. 11230 and Prod. No. 11231
Open the frame holder clip by completely unscrewing the finger screw. Depending on the diameter of
the U-bolt (or tower) on your bike carrier, select the appropriate inset and place it around the U-bolt
tube (tower tube). Then place the clip over this inset and press together. With the finger screw through
both holes on the clip, screw on the bike frame fixing. The bike frames are secured with the strap.
Finally, turn the finger screw firmly together.
Caution: always secure the bikes with an additional safety strap. (No scope of delivery).
Insets fit tube sizes of diameter 25 – 30 mm.
FR
Notice de montage Porteur cadre Réf. 11230 et Réf. 11231
Ouvrez l’attache du porteur cadre en dévissant complètement la vis moletée. Selon le diamètre de
l’étrier en U (ou de la tour) de votre porteur de bicyclettes, choisissez le support correspondant et
placez-le autour du tube de l’étrier en U (tube de tour). Placez ensuite l’attache sur ce support et
comprimez-la. A l’aide de la vis moletée, vissez la fixation du cadre de la bicyclette à travers les deux
perçages de l’attache. Sécurisez les cadres des bicyclettes avec la sangle de serrage. Pour finir,
vissez fermement la vis moletée.
Attention : Sécurisez toujours vos bicyclettes avec une sangle de sécurité supplémentaire. (Ne
fait pas partie de l’étendue de la livraison).
Les supports vont pour des épaisseurs de tubes de 25 à 30 mm de diamètre.
NL
Montage-instructies framehouder art.-nr. 11230 en art.-nr. 11231
Open de klem van de framehouder doordat u de kartelschroef helemaal uitdraait. Naargelang van de
diameter van de U-beugel (of toren) van uw fietsdrager kiest u het passend inzetstuk en legt u dit rond
de U-beugelbuis (torenbuis). Vervolgens legt u de klem over dit inlegstuk en drukt u samen. Met de
kartelschroef door beide openingen van de klem schroeft u de fietsframebevestiging vast. De
fietsframes worden met de spangordel geborgd. Tenslotte draait u de kartelschroef goed samen.
Attentie: Borg de fietsen steeds met een extra veiligheidsgordel (behoort niet tot de
leveringsomvang).
De inlegstuken zijn geschikt voor buissterkten van 25 – 30 mm diameter.

Chat with your EUFAB Frame Holder manual using AI

Get instant AI answers from your EUFAB Frame Holder manual

Ask anything about the EUFAB Frame Holder. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Frame Holder?

Yes No
0
User Pic

Sofia Kahl

7 months ago

How fast is the delivery, and will the item arrive as described?

0
User Pic

Manual.ly

7 months ago

We aim for fast, reliable shipping. Based on customer feedback, orders are typically delivered quickly and smoothly. Items usually arrive exactly as described, with the product you selected and the expected quality. If anything is wrong or damaged on arrival, please contact our support team with your order number and photos if possible, and we will help resolve it promptly.

M: OA-GPT-54-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is used to secure a bicycle frame to a compatible bike carrier. The holder helps keep the bike steadier during transport by combining a clip, inset, screw, and fastening strap.

Is this answer helpful?

A

The holder is designed for tube diameters between 25 and 30 mm. You need to choose the correct inset so it matches the carrier’s U-bolt or tower tube properly.

Is this answer helpful?

A

No, it is not included. The instructions advise using an additional safety strap for safer transport, so users should supply one separately.

Is this answer helpful?

A

First, open the clip by fully unscrewing the finger screw. Then select the proper inset, place it around the tube, position the clip over it, and tighten the screw. After that, secure the bike frame with the strap.

Is this answer helpful?

A

The instructions refer to product numbers 11230 and 11231. These numbers help identify the correct frame holder version.

Is this answer helpful?

A

No, the setup is fairly simple and manual. The process mainly involves choosing the right inset and tightening the holder securely, which makes it manageable for most users.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Fits common tube diameters from 25 to 30 mm for flexible mounting.
  • Finger screw and clip system creates a firm, easy-to-adjust connection.
  • Frame strap helps keep the bicycle stable during transport.
  • Clear multilingual instructions make setup easier for different users.
VS

Disadvantages

  • Extra safety strap is recommended but not included.
  • Works only with compatible tube sizes and carrier shapes.
  • Correct inset selection is required before installation.
  • Mounting is manual, so it may take a few steps to set up properly.
M: OA-GPT-54-NAN

Product Specification

Type

Grab handle

M: OA-GPT-54-NAN

Product Description

EUFAB Long Frame Holder Manual: A Practical Upgrade for Stable Bike Transport

The EUFAB long frame holder is a smart solution for riders who want a more secure and organized way to transport bicycles on a compatible carrier. Built around a simple but effective clamping system, it helps stabilize the bike frame while reducing unwanted movement during travel. The design combines a finger screw, clip, inset pieces, and a fastening strap, creating a reliable setup that feels straightforward and purposeful.

One of the most useful features highlighted in the EUFAB long frame holder Manual is its adjustable fit. The included insets are designed for tube diameters from 25 to 30 mm, making it easier to match the holder to the U-bolt or tower tube on the carrier. This adaptability adds value for users who need a practical mounting option without complicated parts. Once the correct inset is selected, the clip is placed over it, compressed, and tightened with the finger screw to hold everything in place.

The frame holder also focuses on security during transport. After the bike frame is positioned, it is fastened with the strap, helping limit shifting and improving overall stability. This is especially useful when carrying bikes over longer distances or on uneven roads. The manual also stresses an important point: an additional safety strap should always be used. That recommendation adds peace of mind and reflects a careful approach to bike transport.

From a usability perspective, the design is refreshingly practical. It does not rely on complex mechanisms, and the mounting steps are easy to follow for anyone comfortable with basic bike carrier setup. The multilingual instructions suggest a product intended for a broad European audience, while the listed product numbers 11230 and 11231 help identify the correct version quickly. For everyday cyclists, touring riders, and families transporting multiple bikes, this holder offers a dependable and tidy solution.

Notes

  • Best used with compatible carrier tubes in the 25–30 mm range.
  • Always add a separate safety strap for extra protection.
  • Simple manual installation makes it suitable for regular home use.
  • Designed for secure frame contact without unnecessary complexity.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly