Manual.ly Logo

EUFAB Amber IV Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
c9dae3cd66d605d4171316121002e68bf51a page 9
9
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damages to the device or your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date!
Prior to initial use check the contents of the packaging to ensure that they are in perfect condition and complete!
1. PROPER USE OF THE PRODUCT
The AMBER IV bicycle rack is mounted to the trailer tow bar of a car and is designed for the transportation of up to two bicycles.
Intended use also includes the observation of all information provided in these operating instructions, particularly the observance of safety instructions. Any
other use is considered improper and can lead to property damage or personal injury. EAL GmbH assumes no liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
1 x Base frame
8 x Wheel rail
1 x Lamp mount set
1 x U-bracket
2 x Frame holder, short
1 x Frame holder, long
1 x Frame holder, wheel to wheel
4 x Plastic cover
12 x Tensioning strap, short
1 x Tensioning strap, long
1 x Tension-relief strap, two-piece
16 x Lock screw M6 x 50
16 x Washer 17,8 x 6,5 x 1,1
16 x Nut M6
1 x Cross-headed screw M5 x 12
1 x Washer 9,8 x 5,4 x 0,9
1 x Spring washer 8,4 x 5,5 x 1,5
2 x Cross-headed screw M5 x 35
2 x Spring washer 8,1 x 5,5 x 1,2
2 x Washer 9,7 x 5,3 x 0,9
2 x Lock screw M8 x 60
2 x Washer 15,8 x 8,5 x 1,1
2 x Knob nut M8
Cable tie
3. SPECIFICATIONS
Dead weight: 19.5 kg
Payload: 30 kg (at 50 kg supporting load)
40 kg (at 60 kg supporting load)
max. 55 kg (at 75 kg supporting load)
max. 60 kg (at 90 kg supporting load)
Material: Steel
Electrical connection: 13-pin connector
3.1 TOW BAR REQUIREMENTS
• The trailer tow bar must be approved in its construction.
• Ball and ball rod must have been forged in one piece.
• Only mount the bicycle rack to a coupling of steel St52-3, grey cast iron GGG52 or higher quality.
• The D-value of the tow bar ball must be at least 7.6 kN
• Never mount the rack to a tow bar made of aluminium, other light metals or plastic.
OVERVIEW
Bicycle rack „AMBER IV“ for trailer tow bar
1. PROPER USE OF THE PRODUCT 9
2. SCOPE OF DELIVERY 9
3. SPECIFICATIONS 9
3.1 TOW BAR REQUIREMENTS 9
4. SAFETY NOTES AND IMPORTANT INFORMATION 10
5. OPERATING INSTRUCTIONS 11
5.1 MOUNTING THE BICYCLE RACK 11
5.1.1 MOUNTING THE WHEEL RAILS ON THE BASE FRAME 11
5.1.2 MOUNTING THE LAMP MOUNTS 11
5.1.3 SECURING THE LIGHT MOUNT TO THE BASE FRAME 11
5.1.4 MOUNTING THE UBRACKET 11
5.1.5 MOUNTING THE FRAME HOLDER 11
5.1.6 MOUNTING THE LICENSE PLATE HOLDER 11
5.1.7 INSERTING THE LICENSE PLATE 12
5.1.8 LAYING ELECTRICAL CABLES 12
5.1.9 ATTACHING THE PLASTIC COVERS 12
5.1.10 MOUNTING THE SHORT TENSIONING STRAPS 12
5.2 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR 12
5.3 MOUNTING THE BICYCLES TO THE RACK 13
5.4 USING THE TENSIONRELIEF STRAP 13
5.5 FOLDING OUT THE BICYCLE RACK 14
5.6 FOLDING THE BICYCLE RACK UP 14
6. MAINTENANCE AND CARE 14
7. NOTES FOR ENVIRONMENTAL PROTECTION 14
8. CONTACT INFORMATION 14

Chat with your EUFAB Amber IV manual using AI

Get instant AI answers from your EUFAB Amber IV manual

Ask anything about the EUFAB Amber IV. Answers come from this manual, with the pages they are based on.

Amber IV Maintenance Schedule

Before each trip
Check strap security and condition

Verify correct seating of safety straps around bicycles and wheels. Ensure straps are undamaged; replace if worn.

After use
Clean and store rack dry

Wash off mud and dirt with water. Store the bicycle rack in a clean and dry place.

Regularly
Inspect for damage

Check the rack regularly for bent parts, cracks or scratches. Replace damaged or worn parts immediately using original spares.

Regularly
Tighten bolts and nuts

Check bolts and nuts of the bicycle rack regularly and tighten them when necessary.

Immediately
Repair paint damage

Treat any damage to the paintwork immediately with paint to prevent corrosion.

Regularly
Lubricate moving parts

Regularly lubricate rotating and movable parts of the rack mechanism.

Continuously
Keep coupling clean

Keep the trailer tow bar and the rack's coupling area clean and free of grease and dirt.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Amber IV?

Yes No

Frequently Asked Questions

A

The EUFAB Amber 4 is designed to transport up to four bicycles securely depending on the vehicle and tow bar capacity.

Is this answer helpful?

A

The carrier frame is constructed from steel to ensure durability and resistance to wear during transport.

Is this answer helpful?

A

Yes, the trailer tow bar must meet specific requirements including a D-value of at least 7.6 kN to ensure safety.

Is this answer helpful?

A

Yes, the fold-down mechanism allows you to tilt the rack rearward even when bicycles are mounted on it.

Is this answer helpful?

A

For safety reasons, the maximum driving speed should not exceed 130 kilometers per hour.

Is this answer helpful?

A

Regularly clean the hitch, lubricate moving parts, and check bolts and straps for wear to ensure safe operation.

Is this answer helpful?

A

The lighting system connects via the vehicle 13-pin plug to ensure your bike rack lights match the car lights.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports up to four bicycles for versatile group transport needs.
  • Includes tension relief strap to prevent swaying while driving.
  • Features a fold-down mechanism for easy trunk access.
  • Constructed from durable steel for long-term road durability.
  • Quick locking system provides secure attachment to tow bars.
VS

Disadvantages

  • Heavy weight of 19.5 kg might be difficult for some users to lift.
  • Requires specific tow bar D-value compatibility for safe use.
  • Maximum speed limit is restricted to 130 km/h for safety.
  • Manual assembly is required before first use on the road.
  • Payload capacity depends heavily on vehicle tow bar specifications.
M: QW-35-FL

Product Specification

Type

Bike Carrier

Mounting

Rear / Tow Hitch

Load Capacity (Sports Equipment)

4 Bikes

Max Load Capacity

132.28 lbs

Special Features

Tail Lights (13-Pin)

Color

Black

Dimensions

40.16 x 28.35 x 32.68 in (LxWxH)

Weight

42.99 lbs

M: QW-35-FL

Product Description

The Ultimate Guide to the EUFAB Amber 4 Bike Rack

Carrying multiple bicycles requires a secure and reliable system for very long journeys. The EUFAB Amber 4 provides a robust hitch-mounted platform designed for transport stability on highways. It accommodates up to four bikes, making it ideal for large touring groups or families seeking to explore new trails together. The main frame is constructed from durable steel to withstand road vibrations and adverse weather conditions reliably. It weighs approximately 19.5 kg.

Installation involves assembling the wheel rails and securing them tightly to the base frame structure. A sturdy U-bracket holds the bicycle frames securely at the front. Safety straps are provided to fix the wheels and prevent unwanted movement while driving. A specific tension relief strap connects the rack to the vehicle rear bumper area. This reduces the swaying effect caused by wind resistance and sudden braking forces. It is essential to follow all guidelines during setup to ensure safety. The included lighting system connects via a standard 13-pin plug for visibility. A license plate holder is integrated to keep plates visible.

Access to the trunk is simplified by the foldable mechanism feature. You can tilt the device down even with bikes attached comfortably. This saves significant time when loading regular cargo or groceries without removing the bikes. However, safety checks are mandatory before every trip on the road. Verify that the trailer tow bar meets the specific D-value requirements for your car. Do not exceed the maximum speed limit of 130 kilometers per hour. Overloading the rack beyond payload limits can cause serious accidents to you and others.

Maintenance ensures long-term performance and safety for your equipment. Clean the hitch and lock mechanism regularly to prevent rust or corrosion. Lubricate moving parts for smooth folding operation without sticking. Store the unit in a dry place when not in use to protect the steel. Removing loose items like bike accessories prevents damage during transport. This comprehensive guide provides detailed steps for assembly and usage. Always ensure the lock is engaged to prevent theft of your bikes.

With careful use and adherence to safety protocols, you enjoy secure travel everywhere. The design balances capacity with your vehicle handling characteristics effectively. It adapts to various car models with compatible tow bar specifications. Double check you keep the reference material handy for future maintenance needs. Proper care guarantees the equipment remains safe for many years of use. The materials are recyclable for environmental protection upon disposal. Refer to the provided text for exact fitting details. Contact customer support for questions regarding vehicle compatibility.

M: QW-35-FL

© Copyright 2026 Manual.ly