Manual.ly Logo

esotec WaterDrops Manual

4.0 · 1 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
4227-esotec-waterdrops-manual page 1
inuence of the weather, e.g. against too strong rain or direct spraying with
the water hose.
3. Now choose a sunny, shadow-free place for the solar module. The solar
module may be inserted into the ground with the ground spike or screwed-
on with the enclosed holder.
4. Lay the cable for the solar module carefully and without tripping hazards.
Connect the plug of the cable on the solar module with the associated
socket on the control unit (1). The integrated battery is charged in case of
adequately intensive solar radiation onto the solar module.
5. Remove the 2 protective caps from both nozzles for inowing and
outowing water.
6. Cut off approx. 20 centimeters from the (transparent) suction hose (2) and
attach this short piece onto the nozzle for outowing water. (2).
7. In this short piece of hose, please insert the T-reducer with its larger side
(3).
8. On the nozzle for inowing water, please attach the remaining (transparent)
suction hose auf (4). This hose has to be laid up to the reservoir tank for
water, e.g. a rainwater barrel (5).
9. Insert the suction lter (if not already assembled) onto the suction hose
(6). This lter keeps coarse dirt away from the pump. Throw this lter into
the lled water barrel.
Note: Please don´t install the lter on the bottom from the water reservoir. This
prevents the pump from sucking sand grains or similar and losing power.
10. Now take the black oat switch and also put it into the lled water barrel (7).
Now insert the plug of the oat cable into the socket on the control unit (8).
The pump is working if the oat is upright in the water. In case it should lay
on its side due to the lack of water, then the pump will be deactivated and
it is required to rell an adequate amount of water.
11. Cut off approx. 10 centimeters from the (black)
irrigation hose and insert this short piece onto
the free end of the T-reducer (9) which points
upwards. In this short piece, please insert
the (blue) ventilation valve (10). This valve
prevents the uncontrolled running on of the water.
Note: Here, please make sure that the valve is inserted with the right side up!
12. With the remaining piece of the irrigation hose, the
15 hose holders (11), the 15 black T-pieces (12)
and the 15 water drippers (13) you are now able to
install the desired distribution grid for the irrigation.
The dripping volume is xed to 2 l/h.
13. With the multistage selector switch (14) on the housing
you may set the time of operation of the pump. The pump
pumps at the break of dawn and at nightfall depending on
the set value. It may be selected in 6 stages in a range
of 30 seconds (0.5 min) up to a maximum of 12 minutes.
In the position „Test“ it is possible to test the pump or
pump the air out of the hoses when the pump is put into
operation for the rst time.
Operating instructions
Solar irrigation system “Water Drops”
These instructions relate ONLY to this product and contain important infor-
mation for using the product for the first time. Please keep these instructions
for later reference and should always accompany the product in the event of
transference to a new user.
1. Introduction
Dear Costumer, thank you for purchasing the solar pump kit.
With this solar pump kit you purchased a product manufactured according to the
current state of technology.
This product fulfils all requirements of the valid European and nati-
onal regulations. The conformity was proved. The relevant declara-
tions and documentation are deposited with the manufacturer.
To maintain this state and guarantee a safe operation, you as the user will have to
follow this operating manual!
2. Safety Instructions
- In case of damages caused by not following
this operating manual, the warranty rights
will expire! We exclude liability for any
consequential damages!
- We exclude liability for property or
personal damages caused by inappropriate
handling or not following the safety instructions.
- In these cases any guarantee rights will expire.
Due to safety and admission reasons (CE) it is not allowed to arbitrarily reconstruct
and/or change the solar pump kit.
Therefore, please keep to the operating manual.
The accident prevention rules of the association of the industrial trade cooperative
association for electric plants and working material are to be considered in industrial
environments.
3. Function and intended use
The solar irrigation system is intended for outdoor use. With this system it is
possible to irrigate the plants in the garden, in the greenhouse, in the hotbed,
on the balcony or on the raised bed with a maximum of 15 water drippers. The
irrigation is performed once a day at the break of dawn and once at nightfall. The
operating time of the pump may be set between 0.5 minutes and 12 minutes.
The dripping volume is xed to 2 l/h.
Thus, you have the ideal solution for an automatic and network-independent
irrigation of your potted plants or vegetable bed. The integrated diaphragm
pump sucks water from a depth of up to 2 meters e.g. from a rainwater barrel.
The crystalline solar module charges the integrated battery pack during the day
and sunshine.
The means complete independence from the mains current!
4. Scope of delivery
1. 1 x control unit
2. 1 x solar module including
connecting cable and holder
3. 1 x Float switch
4. 2 m suction hose with lter
transparent
5. 5 m pressure hose black
6. 1 x T-piece transparent
7. 15 x T-piece small black
8. 15 x hose holder
9. 15 x water dripper 2 l/h
10. valve
11. seal plug
5. Assembly and putting into operation
1. Please carefully take all parts out of the package. Make sure that you have
really taken all parts out of the package before disposing the package
materials in an environmentally compatible way.
2. Choose an appropriate location for the control unit. In doing so, please pay
attention to the fact that its position has to be higher than the maximum
water level of the water reservoir. Protect the control unit against the direct
!
GB
3
4
5
6
7
9
11
10
8
14
1
2
3
4
8
9
10
5
6
7
910
bevel
Customer support:
If you have problems or questions regarding this product, simply contact us!
Monday to Friday 9 am to 12 noon and 1 pm to 4 pm.
By phone: +49 9605-92206-0
By e-mail for ordering spare parts: [email protected]
By e-mail for questions about the product: [email protected]
Product: Manufacturer Item No.: 101100
11
12
13

Chat with your esotec WaterDrops manual using AI

Get instant AI answers from your esotec WaterDrops manual

Ask anything about the esotec WaterDrops. Answers come from this manual, with the pages they are based on.

WaterDrops Maintenance Schedule

Remind me when maintenance is due
Occasionally
Clean the solar module

Wipe the solar module with a soft, slightly damp cloth.

Every 2 years
Replace the battery pack

Replace the battery pack at the latest every 2 years with an identical 3.6 V, minimum 1200 mAh pack.

As needed by contamination
Wash the intake filter

Wash out the intake filter depending on how dirty it is.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend WaterDrops?

Yes No
0
User Pic

Anna Schmidt

8 months ago

Is assembly difficult? Does it require special tools to put together?

0
User Pic

Manual.ly

8 months ago

Based on customer feedback, this item is quickly mounted and assembled. Most users found it reliable and easy to put together without extra tools.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224
0
User Pic

MaximeEst44

5 months ago

Is this product easy to assemble and reliable in daily use?

0
User Pic

Manual.ly

5 months ago

Yes, the product is designed for quick assembly and straightforward setup. Users report that it functions flawlessly and operates reliably over time. Many customers have noted they would purchase it again due to its ease of installation and consistent performance.

M: QW-35-FL
M: QW-35-FL
0
User Pic

ut_est

5 months ago

How long does the assembly process typically take?

M: QW-35-FL
0
User Pic

Marta Schneider

8 months ago

Is the product easy to assemble, and does it work reliably after setup?

0
User Pic

Manual.ly

8 months ago

Yes. Customers report that the assembly is quick and straightforward, and they managed to put it together without issues. After installation, it runs reliably and consistently. If you follow the included instructions during setup, you should expect stable performance from the start.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Video Manual

Quick Review Esotec WaterDrops Solar Bewässerungssystem

Frequently Asked Questions

A

The pump runs twice daily at dawn and dusk. The duration is adjustable via a selector switch, allowing you to choose any setting between 30 seconds and 12 minutes per activation.

Is this answer helpful?

A

Yes, but it is primarily designed for rainwater barrels. Ensure the water source is clean enough to prevent clogging the 2 l/h emitters and the intake filter.

Is this answer helpful?

A

The system relies on the internal NiMh battery. If the battery is fully charged, it will continue to operate until depleted. During cloudy periods, ensure the solar panel remains clean to maximize charging efficiency.

Is this answer helpful?

A

No, the system is designed for outdoor use only. The control unit has an IP44 rating, which protects against splashing water but not submersion or harsh indoor conditions.

Is this answer helpful?

A

Place the intake filter in the water container so it floats slightly above the bottom. Do not let it rest directly on the floor of the barrel to avoid drawing in sediment.

Is this answer helpful?

A

You must dismantle the system and store all components in a warm, dry place. Leaving the unit outside in freezing temperatures can cause the pump and pipes to crack due to ice expansion.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Completely independent from mains electricity using solar power
  • Automatic operation at dawn and dusk saves time and effort
  • Includes 15 drip emitters with a fixed 2 l/h flow rate for precision
  • Adjustable pump duration from 30 seconds up to 12 minutes
  • Float switch prevents dry running and protects the pump
VS

Disadvantages

  • System requires manual disassembly and storage during freezing winters
  • Battery needs replacement approximately every two years
  • Intake hose length limits water source depth to 2 meters
  • Solar charging depends heavily on sufficient daily sunlight exposure
  • Emitters have a fixed flow rate that cannot be adjusted individually
M: QW-35-FL

Product Specification

Watering cycles per day

2

Watering duration

0.5-12 min

Package contents

Control unit, solar panel, float switch, intake hose 6.56 ft (with filter), pressure hose 16.4 ft, T-piece, bracket, valve, plug

M: QW-35-FL

Product Description

Unlocking Green Thumb Potential with the esotec WaterDrops Solar Irrigation Set Manual

Gardening enthusiasts often struggle to find a reliable, automatic watering solution that doesn't rely on costly electricity bills or complex wiring. The esotec WaterDrops Solar Irrigation Set offers a pristine alternative by harnessing the power of the sun to keep your plants hydrated. This system is designed specifically for private outdoor use, making it perfect for balconies, raised beds, greenhouses, and vegetable patches. It operates independently from the mains supply, ensuring your garden thrives even during power outages.

At the heart of this device is a crystalline solar module that charges an integrated NiMh battery pack during sunny days. Once charged, the system automatically activates at dawn and dusk to pump water from a source up to two meters deep, such as a rain barrel. The set includes fifteen drip emitters, each delivering a precise flow rate of 2 liters per hour, creating an efficient distribution network. Users can customize the pumping duration using a multi-stage selector switch, ranging from thirty seconds to twelve minutes per cycle.

Installation is straightforward when following the esotec WaterDrops Solar Irrigation Set Manual guidelines. The process involves securing the control unit in a weather-protected area, positioning the solar panel in direct sunlight, and connecting the various hoses and fittings. A float switch prevents the pump from running dry, while a check valve stops backflow when the system shuts off. Proper assembly ensures longevity and optimal performance without risking damage to your irrigation lines or surrounding surfaces.

Maintenance is minimal but essential. Regularly cleaning the intake filter and wiping down the solar panel keeps the system running efficiently. In winter months, the unit must be drained and stored indoors to prevent frost damage. By adhering to these simple steps, gardeners can enjoy a sustainable, low-maintenance watering solution that promotes healthy plant growth year after year.

Important Notes

  • Always protect the control unit from direct rain and hose spraying.
  • Ensure the intake filter does not rest on the bottom of the water container to avoid sucking up sand.
  • Replace the battery pack every two years for consistent operation.
  • Dispose of old batteries at designated recycling points, never in household trash.
M: QW-35-FL

© Copyright 2026 Manual.ly